• H. Taghavifar, S. Khalilarya, S. Jafarmadar
    Energy Sci Eng (2015).

    Abstract
    Three-dimensional (3-D) computational code was implemented to solve conservation equations based on finite volume method as to simulate 1.8 L Ford diesel engine. Velocity [...]

  • G. Sudheer, A. Suseelatha
    Energy Sci Eng (2015). Vol. 51

    Abstract
    Load forecasts of short lead times ranging from an hour to a day ahead are essential for improving the economic efficiency and reliability of power systems. This paper proposes [...]

  • A. Stotsky, B. Egardt, O. Carlson
    Energy Sci Eng (2013). Vol. 2

    Abstract
    Recent achievements in the proactive turbine control, based on the upwind speed measurements, are described in a unified framework (as an extension of the tutorial [1]), that [...]

  • A. Stotsky
    Energy Sci Eng (2014).

    Abstract
    Detection of blade root moment sensor failures is an important problem for fault-tolerant individual pitch control, which plays a key role in reduction of uneven blade loads [...]

  • M. Stephenson
    Energy Sci Eng (2016). Vol. 4

    Abstract
    According to the U.S. Energy Information Administration, shale gas will provide half of the United States’ domestic gas by 2035. The United States has already moved from [...]

  • M. Soroush, D. Wessel-Berg, O. Torsaeter, J. Kleppe
    Energy Sci Eng (2014).

    Abstract
    Two-dimensional glass model experiments are used to investigate the residual trapping mechanism of CO2 stored in saline aquifers. For this purpose, two proxy fluids are chosen [...]

  • B. Soria, E. Gerritsen, P. Lefillastre, J. Broquin
    Energy Sci Eng (2016). Vol. 52

    Abstract
    Despite the apparent benefits of bifacial modules, their application still suffers from a lack of visibility on the performance gain that they can actually provide. In this [...]

  • R. Søndergaard, M. Hösel, N. Espinosa, M. Jørgensen, F. Krebs
    Energy Sci Eng (2013). Vol. 81

    Abstract
    Here, we present a process based on roll-to-roll (R2R) technology which allows for very fast processing of polymer thermoelectric (TE) devices and we furthermore demonstrate [...]

  • S. Sjökvist, S. Eriksson
    Energy Sci Eng (2013).

    Abstract
    One of the main aspects when designing a permanent magnet (PM) generator is to choose suitable PMs, both in terms of achieving the required flux in the generator but also [...]

  • K. Sinapis, G. Litjens, M. Donker, W. Folkerts, W. Sark
    Energy Sci Eng (2015).

    Abstract
    Building integrated and building attached photovoltaic (BIPV, BAPV) systems may suffer from lower performance than predicted as a result of unwanted partial shading. New system [...]

  • D. Siemer
    Energy Sci Eng (2015).

    Abstract
    A simultaneously “nuclear”, permanent, and in-time solution to mankinds energy-related problems would require the relatively rapid manufacture of 10, 000–30, 000 genuinely [...]

  • I. Shown, A. Ganguly, L. Chen, K. Chen
    Energy Sci Eng (2015). Vol. 2

    Abstract
    Flexible supercapacitors, a state-of-the-art material, have emerged with the potential to enable major advances in for cutting-edge electronic applications. Flexible supercapacitors [...]

  • W. Ho, H. Ng, S. Gan, W. Chan
    Energy Sci Eng (2015).

    Abstract
    Ultrasound-assisted transesterification of refined palm oil (RPO) and crude palm oil (CPO) to produce biodiesel using a palm oil mill fly ash supported calcium oxide (CaO) [...]

  • J. Tumuluru
    Energy Sci Eng (2015).

    Abstract
    The quality and specific energy consumption (SEC) of the biomass pellets produced depend upon pelleting process conditions. The present study includes understanding the effect [...]

  • M. Sekine, Y. Ogawa, N. Matsuoka, Y. Izumi
    Energy Sci Eng (2014). Vol. 39

    Abstract
    We examined pilot-scale bioethanol production from rice straw using sodium carbonate pulping as the alkaline pulping method and enzymatic saccharification. The yield of prewashed [...]

  • J. Sánchez
    Energy Sci Eng (2014).

    Abstract
    Fusion energy, based on the use of broadly available inexhaustible resources as lithium and deuterium and with minimal impact to the environment, aims at a change in the energy [...]

  • N. Reininghaus, C. Feser, B. Hanke, M. Vehse, C. Agert
    Energy Sci Eng (2016).

    Abstract
    Solar cells used in building integration of photovoltaic cells (BIPV) are commonly made from crystalline wafer cells. This contribution investigates the challenges and benefits [...]

  • T. Rachow, S. Reber, S. Janz, M. Knapp, N. Milenkovic
    Energy Sci Eng (2016).

    Abstract
    The material quality degradation of silicon wafers by metal impurities, various crystal defects as well as light and thermally induced mechanisms is very important for the [...]

  • G. Prinsloo, R. Dobson
    Energy Sci Eng (2015).

    Abstract
    A project has been initiated in South Africa to design, model, build, and evaluate an easy to install solar fueled combined heat and power (micro-CHP) system to supply off-grid [...]

  • Y. Zhang
    Energy Sci Eng (2013).

    Abstract
    The future roles of biomass and carbohydrate for meeting needs of food/feed, renewable materials, and transportation fuels (biofuels) remain controversial due to numerous [...]

  • G. Patry, A. Romagny, S. Martinet, D. Froelich
    Energy Sci Eng (2015). Vol. 71

    Abstract
    The purpose of this study was to highlight the technical and economic issues arising in lithium-ion cells for automotive applications, and to indicate some potential solutions [...]

  • T. Parker, A. Kiessling
    Energy Sci Eng (2016).

    Abstract
    At present food production depends almost exclusively on direct use of stored energy sources, may perhaps they be nuclear-, petroleum-, or biobased. Arable land, artificial [...]

  • M. Pagliaro, F. Meneguzzo, F. Zabini, R. Ciriminna
    Energy Sci Eng (2014).

    Abstract
    We investigate the value of solar photovoltaic (PV) power in the Italian wholesale electricity market (IPEX). A model is developed and applied to simulate and predict the [...]

  • M. Pagliaro
    Energy Sci Eng (2014). Vol. 86

    Abstract
    Quebecs large solar power potential markedly contrasts with its poor achievements in using solar energy in this large and wealthy region of the world. Reviewing recent developments [...]

  • S. Oyedepo, R. Fagbenle, S. Adefila, M. Alam
    Energy Sci Eng (2015).

    Abstract
    This study presents comprehensive thermoeconomic and thermoenvironomic modeling and analysis of selected gas turbine power plants in Nigeria using the first and second laws [...]

  • S. Oyedepo, R. Fagbenle, S. Adefila
    Energy Sci Eng (2015).

    Abstract
    In this study, performance assessment of selected gas turbine power plants in Nigeria was evaluated using performance indices. The results of the study showed that for the [...]

  • L. Olatomiwa, S. Mekhilef, A. Huda, K. Sanusi
    Energy Sci Eng (2015).

    Abstract
    In recent times, hybrid renewable energy systems are increasingly being utilized to provide electricity in remote areas especially where the grid extension is considered too [...]

  • S. Obara
    Energy Sci Eng (2014).

    Abstract
    The energy supply characteristic of a proton-exchange membrane fuel cell for houses is strongly influenced in a hydrogen supply unit. Therefore, a bioethanol reforming system [...]

  • Z. Norwood, D. Kammen, R. Dibble
    Energy Sci Eng (2014). Vol. 61

    Abstract
    In this article, we present performance results and analysis of a novel rotary lobe expander device. This is part of a larger research effort into the analysis and design [...]

  • S. Njoku, H. Uellendahl, B. Ahring
    Energy Sci Eng (2013). Vol. 89

    Abstract
    The choice of a suitable pretreatment method and the adjustment of the pretreatment parameters for efficient conversion of biomass are crucial for a successful biorefinery [...]

  • Y. Nishikawa, K. Imai, K. Miyao, S. Uchida, D. Aoki, H. Saito, S. Magaino, K. Takagi
    Energy Sci Eng (2015).

    Abstract
    A new irradiance adjustment system for the light source named “Programmable Reference cell system for Irradiance adjustment by Spectral Measurement (PRISM)” has been developed [...]

  • S. Irungu, P. Muchiri, J. Byiringiro
    Energy Sci Eng (2017). Vol. 90

    Abstract
    The cement production process is energy intensive both in terms of the thermal energy (firing the kiln, drying and De carbonation) and electrical energy for driving the numerous [...]

  • S. Nanda, S. Reddy, S. Mitra, J. Kozinski
    Energy Sci Eng (2016).

    Abstract
    The global warming is directly related to the increased greenhouse gas emissions from both natural and anthropogenic origins. There has been a drastic rise in the concentration [...]

  • S. Nanda, A. Dalai, J. Kozinski
    Energy Sci Eng (2014).

    Abstract
    Lignocellulosic feedstock has tremendous potential to sustain the renewable production of biofuels such as ethanol and butanol. Although lignocellulosic biomass is a storehouse [...]

  • R. Muktham, A. Ball, S. Bhargava, S. Bankupalli
    Energy Sci Eng (2016). Vol. 86

    Abstract
    Karanja is a medium sized evergreen tree which has minor economic importance in India. The nonedible seed kernel contains 27–30% oil that is used for biodiesel production, [...]

  • N. Mittal, A. Samanta, P. Sarkar, R. Gupta
    Energy Sci Eng (2015).

    Abstract
    In this work, the performance of N-(3-trimethoxysilylpropyl)diethylenetriamine (DAEAPTS)-grafted mesoporous SBA-15 adsorbent for postcombustion carbon capture was studied. [...]

  • F. Meneguzzo, R. Ciriminna, L. Albanese, M. Pagliaro
    Energy Sci Eng (2016).

    Abstract
    During the first half of 2015, for the first time, the zonal electricity price in Sicily decreased below than the national wholesale price in Italy. Showing the unique pattern [...]

  • F. Meneguzzo, R. Ciriminna, L. Albanese, M. Pagliaro
    Energy Sci Eng (2015).

    Abstract
    This study offers a unified perspective into the unexpected solar energy photovoltaic revolution, and its far reaching impact onto both energy generation and electricity markets. [...]

  • J. Meiss, H. Ziehlke, S. Schubert, K. Leo, M. Riede
    Energy Sci Eng (2014). Vol. 77

    Abstract
    We present 10-nm thick metal alloys created by coevaporation of calcium and silver as transparent top electrode for inverted bulk heterojunction small-molecule organic solar [...]

  • A. Ragauskas, Y. Pu, A. Ragauskas
    Energy Sci Eng (2013). Vol. 42

    Abstract
    The need for sustainable biofuels has initiated a global search for innovative technologies that can sustainably convert nonfood bioresources to liquid transportation fuels. [...]

  • S. Lo, F. Cheng, V. Chang, W. Liu, L. Chang, O. Adurodija, E. Chou, C. Lung, J. Liu, T. Lu, J. Su, E. Cheng
    Energy Sci Eng (2015).

    Abstract
    This article discusses the design, operation, and performance evaluation of a unique cable-operated 6.24 kWp commercial-size solar tracking system called iPV dual-axis tracker [...]

  • F. Lontsi, O. Hamandjoda, K. Djanna, P. Stouffs, J. Nganhou
    Energy Sci Eng (2013).

    Abstract
    Externally heated Joule cycle reciprocating engines, also known as Ericsson engines, are particularly suitable for small-scale solar energy conversion and microcogeneration [...]

  • P. Lombardi, C. Röhrig, K. Rudion, R. Marquardt, M. Müller-Mienack, A. Estermann, Z. Styczynski, N. Voropai
    Energy Sci Eng (2014).

    Abstract
    In the last decade in Europe, the power generated by Renewable Energy Sources (RES) has significantly increased. For the electric power system, the integration of a high amount [...]

  • K. Li, A. Cousins, H. Yu, P. Feron, M. Tade, W. Luo, J. Chen
    Energy Sci Eng (2016). Vol. 23

    Abstract
    In this paper, we present improvements to postcombustion capture (PCC) processes based on aqueous monoethanolamine (MEA). First, a rigorous, rate-based model of the carbon [...]

  • N. Langat, T. Thoruwa, J. Wanyoko, J. Kiplagat, B. Plourde, J. Abraham
    Energy Sci Eng (2015). Vol. 43

    Abstract
    An experimental apparatus has been developed to evaluate the drying process of green tea leaves. Tea drying is an energy-intensive process which results in the removal of [...]

  • A. Kunwar, R. Bansal, O. Krause
    Energy Sci Eng (2014).

    Abstract
    In modern, stressed distribution system, voltage stability is a major concern from planning and operation perspectives. Remote wind farm connected to a weak distribution system [...]

  • A. Krüger, H. Krieg, S. Grigoriev, D. Bessarabov
    Energy Sci Eng (2015).

    Abstract
    The application of PFSA-based proton exchange membranes was investigated for the production of hydrogen and sulfuric acid using a SO2-depolarized electrolyzer system. Parameters [...]

  • T. Kohler, K. Müller
    Energy Sci Eng (2017). Vol. 21

    Abstract
    The main influencing parameter on the efficiency of adsorptive thermochemical energy storage is the efficiency of the desorption process, which is influenced by the process [...]

  • A. Klerk
    Energy Sci Eng (2015). Vol. 60

    Abstract
    Investigations into direct methane to methanol conversion are justified based on the avoidance of synthesis gas generation, which accounts for around 60% of the capital cost [...]

  • M. Kempe, D. Miller, J. Wohlgemuth, S. Kurtz, J. Moseley, D. Nobles, K. Stika, Y. Brun, S. Samuels, Q. Shah, G. Tamizhmani, K. Sakurai, M. Inoue, T. Doi, A. Masuda, C. Vanderpan
    Energy Sci Eng (2016). Vol. 40

    Abstract
    As creep of polymeric materials is potentially a safety concern for photovoltaic modules, the potential for module creep has become a significant topic of discussion in the [...]

  • M. Kempe, D. Miller, J. Wohlgemuth, S. Kurtz, J. Moseley, Q. Shah, G. Tamizhmani, K. Sakurai, M. Inoue, T. Doi, A. Masuda, S. Samuels, C. Vanderpan
    Energy Sci Eng (2015).

    Abstract
    Recently there has been increased interest in using thermoplastic encapsulant materials in photovoltaic modules, but concerns have been raised about whether these would be [...]

  • J. Kansedo, K. Lee
    Energy Sci Eng (2014). Vol. 31

    Abstract
    This study investigates the esterification of hydrolyzed sea mango (Cerbera odollam) oil using several cationic ion exchange resins. The best resins were selected based on [...]

  • H. Kanda, A. Uzum, N. Harano, S. Yoshinaga, Y. Ishikawa, Y. Uraoka, H. Fukui, T. Harada, S. Ito
    Energy Sci Eng (2016).

    Abstract
    An Al2O3/TiO2 double layer anti-reflection coating (ARC) film formed by spray pyrolysis was introduced for monocrystalline silicon solar cells as the nonvacuum processing [...]

  • A. jibouri, G. Turcotte, J. Wu, C. Cheng
    Energy Sci Eng (2015).

    Abstract
    In an attempt to maximize the amount of ozone reacting with lignin inside humid wheat straw, some of the ozone-reactive lignin degradation products were washed away before [...]

  • T. Kåberger
    Energy Sci Eng (2017). Vol. 4

  • T. Kåberger
    Energy Sci Eng (2016). Vol. 3

  • T. Kåberger
    Energy Sci Eng (2015). Vol. 1

  • T. Kåberger
    Energy Sci Eng (2013). Vol. 1

  • C. Jin, L. Liu, Y. Li, R. Zeng
    Energy Sci Eng (2017). Vol. 81

    Abstract
    Sequestrating CO2 in deep saline aquifers is maybe the most effective option to mitigate CO2 emission. The storage capacity of CO2 is the key factor for site selection before [...]

  • S. Jafarmadar, A. Zehni
    Energy Sci Eng (2014). Vol. 1

    Abstract
    Dwell duration of multiple-injection scheme is an important parameter, which makes it possible to shift the tradeoff curve between soot and NOx closer to the origin. In this [...]

  • T. Ishii, K. Otani, A. Itagaki, K. Utsunomiya
    Energy Sci Eng (2013). Vol. 18

    Abstract
    Nowadays, investors, customers, and even suppliers focus on the bankability of photovoltaic (PV) technologies. However, few studies have investigated the annual net effect [...]

  • R. Howarth
    Energy Sci Eng (2014). Vol. 47

    Abstract
    In April 2011, we published the first peer-reviewed analysis of the greenhouse gas footprint (GHG) of shale gas, concluding that the climate impact of shale gas may be worse [...]

  • T. Howard
    Energy Sci Eng (2015).

    Abstract
    The University of Texas reported on a campaign to measure methane (CH4) emissions from United States natural gas (NG) production sites as part of an improved national inventory. [...]

  • B. Hong, R. Howarth
    Energy Sci Eng (2016).

    Abstract
    We estimate the emissions of the two most important greenhouse gasses (GHG), carbon dioxide (CO2) and methane (CH4), from the use of modern high-efficiency heat pump water [...]

  • J. Hofer, A. Groenewolt, P. Jayathissa, Z. Nagy, A. Schlueter
    Energy Sci Eng (2016).

    Abstract
    Shading systems improve building energy performance and occupant comfort by controlling glare, natural lighting, and solar gain. Integrating PV (photovoltaics) in shading [...]

  • D. Zeiner-Gundersen
    Energy Sci Eng (2015).

    Abstract
    This paper discusses tidal, ocean, and river free turbine functional design parameters and general considerations associated with tidal field developments. A particular focus [...]

  • J. Hepp, F. Machui, H. Egelhaaf, C. Brabec, A. Vetter
    Energy Sci Eng (2016).

    Abstract
    It is well known that the performance of solar cells may significantly suffer from local electric defects. Accordingly, infrared thermography (i.p. lock-in thermography) has [...]

  • B. Han, Y. Hu
    Energy Sci Eng (2016).

    Abstract
    Solar-to-hydrogen conversion based on photocatalytic water splitting is a promising pathway for sustainable hydrogen production. The photocatalytic process requires highly [...]

  • A. Alami, J. Abed, M. Almheiri, A. Alketbi, C. Aokal
    Energy Sci Eng (2016).

    Abstract
    This study investigates the performance of dye-sensitized solar cells constructed with a Fe-Cu metastable material as the mesoporous layer on which a natural organic dye is [...]

  • N. Gupta, G. Tiwari
    Energy Sci Eng (2016).

    Abstract
    In this review, an attempt has been made to analyze passive solar heating and cooling concepts along with their effects on performance of a buildings thermal management. The [...]

  • M. Gross, V. Magar
    Energy Sci Eng (2015).

    Abstract
    Offshore and near-shore wind energy is one of the major renewable energy resources, which already make a substantial contribution to the energy supply in Europe. Nevertheless, [...]

  • A. Gladis, P. Bondesson, M. Galbe, G. Zacchi
    Energy Sci Eng (2015).

    Abstract
    In this study, three different kinds of simultaneous saccharification and fermentation (SSF) of washed pretreated corn stover with water-insoluble solids (WIS) content of [...]

  • A. Ghahremani, A. Fathy
    Energy Sci Eng (2016).

    Abstract
    Enhancing light absorption within thin film amorphous silicon (a-Si) solar cells should lead to higher efficiency. This improvement is typically done using various light trapping [...]

  • A. Ghahremani, A. Fathy
    Energy Sci Eng (2015).

    Abstract
    A 3D multiphysics simulation toolbox for thin-film amorphous silicon solar cells has been developed. The simulation is rigorous and is based on developing three modules: first [...]

  • S. Ghaderi, Y. Leonenko
    Energy Sci Eng (2015).

    Abstract
    A study, entitled “Wabamun Lake Sequestration Project” or “WASP, ” was performed to evaluate large-scale CO2 storage opportunities in the Wabamun area including potential [...]

  • K. Fujiwara, Y. Horioka, S. Sakuragi
    Energy Sci Eng (2015).

    Abstract
    The growth of a multicrystalline silicon (mc-Si) ingot for solar cell applications was attempted using a Liquinert quartz crucible. A mc-Si ingot was also grown in a quartz [...]

  • J. Faye, M. Capron, A. Takahashi, S. Paul, B. Katryniok, T. Fujitani, F. Dumeignil
    Energy Sci Eng (2015).

    Abstract
    The one-step selective oxidation of methanol to dimethoxymethane (DMM) was demonstrated over titania-supported molybdenum oxide catalysts, containing different amounts of [...]

  • M. Fadaeenejad, M. Radzi, M. Fadaeenejad, M. Zarif, Z. Gandomi
    Energy Sci Eng (2015).

    Abstract
    In recent years, research about the application and optimization of PV panels has grown rapidly. Especially for stand-alone solar systems there have been some problems related [...]

  • M. Eriksson, B. Hökfors, R. Backman
    Energy Sci Eng (2014).

    Abstract
    The purpose of this article is to study the impact of oxyfuel combustion applied to a rotary kiln producing lime. Aspects of interest are product quality, energy efficiency, [...]

  • S. Eriksson, J. Kjellin, H. Bernhoff
    Energy Sci Eng (2013).

    Abstract
    A novel control method for a fixed-pitch variable speed wind turbine is introduced and experimental results are presented. The measured absorbed power and rotational speed, [...]

  • R. Ebrahim, A. Zomorrodian, N. Attia, K. Geckeler, A. Ignatiev
    Energy Sci Eng (2016).

    Abstract
    Hydrogen adsorption in porous nanostructured polyaniline (PANI) has been investigated to determine its potential as a hydrogen storage media. Residual gas analysis and thermogravimetric [...]

  • A. Eberhard, T. Kåberger
    Energy Sci Eng (2016).

    Abstract
    South Africas Renewable Energy Independent Power Producer Procurement Program has run four competitive tenders/auctions since 2011, which have seen US$19 billion in private [...]

  • R. Dubey, S. Chattopadhyay, V. Kuthanazhi, A. Kottantharayil, C. Solanki, B. Arora, K. Narasimhan, J. Vasi, B. Bora, Y. Singh, O. Sastry
    Energy Sci Eng (2017). Vol. 51

    Abstract
    The All India Survey of Photovoltaic Module Reliability 2014 is an enhanced version of the survey conducted in the previous year, with detailed characterization of PV modules [...]

  • L. Duan, X. Yu, S. Jia, B. Wang, J. Zhang
    Energy Sci Eng (2017). Vol. 38

    Abstract
    In this paper, a tower solar collector-aided coal-fired power generation (TSCACPG) system is proposed and studied in order to save the fossil energy and protect the environment. [...]

  • S. Das, S. Chakraborty, P. Sadhu, O. Sastry
    Energy Sci Eng (2015).

    Abstract
    Detail analysis of microcontroller (μC)-based smart dual-axis automatic solar tracking system utilizable for different purpose is presented in this paper. Working of the [...]

  • B. Coto, C. Martos, J. Espada, M. Robustillo, J. Peña
    Energy Sci Eng (2014).

    Abstract
    The blocking problems in equipment and flowlines caused by precipitation of wax solids is a well-known problem and large research efforts have been focused on developing procedures [...]

  • G. Corro, U. Pal, S. Cebada
    Energy Sci Eng (2014).

    Abstract
    Production of biogas utilizing agricultural wastes is one of the most demanding technologies for generating energy in sustainable manner considering environmental concerns. [...]

  • F. Eboh, P. Ahlström, T. Richards
    Energy Sci Eng (2016).

    Abstract
    A new model for predicting the specific chemical exergy of municipal solid waste (MSW) is presented, the model is based on the content of carbon, hydrogen, oxygen, nitrogen, [...]

  • S. Chakraborty, P. Sadhu, N. Pal
    Energy Sci Eng (2015).

    Abstract
    This paper aims toward the first step for green campus approach for Indian School of Mines (ISM) campus. Comparative study of the performances for nine different commercialized [...]

  • A. Carrick
    Energy Sci Eng (2017). Vol. 68

    Abstract
    The energy group of SCI (Society of Chemical Industry) was host for an event on 28th March 2017 at SCI Headquarters in London (UK) with a meeting on the important topic of [...]

  • P. Brack, S. Dann, K. Wijayantha
    Energy Sci Eng (2015).

    Abstract
    It is clear that in order to satisfy global energy demands whilst maintaining sustainable levels of atmospheric greenhouse gases, alternative energy sources are required. [...]

  • P. Brack, S. Dann, K. Wijayantha, P. Adcock, S. Foster
    Energy Sci Eng (2015).

    Abstract
    The chemical hydrogen storage properties of ferrosilicon were investigated. A hydrogen yield of ~4.75 wt.% (with respect to the mass of ferrosilicon) was estimated by the [...]

  • C. Jang, S. Jung
    Energy Sci Eng (2016).

    Abstract
    Due to numerous hazardous chemicals to handle, the process plant industry has a higher risk of fire, explosion, and toxic release than other industries. Reviewing the accidents [...]

  • V. Bhatnagar, P. Owende
    Energy Sci Eng (2015).

    Abstract
    Technology advances have enabled modification of the size and shape of the electronic components to the microscale, with commensurate scaling down of their power requirements [...]

  • P. Berberi, S. Thodhorjani, P. Hoxha, V. Muda
    Energy Sci Eng (2013). Vol. 72

    Abstract
    There is “breakneck” growth in the global photovoltaics market, with the global market of photovoltaic cells growing by about 47% in 2009, 72% in 2010, and 74% in 2011. [...]

  • S. Bae, W. Oh, K. Lee, S. Kim, H. Kim, N. Park, S. Chan, S. Park, Y. Kang, H. Lee, D. Kim
    Energy Sci Eng (2017). Vol. 30

    Abstract
    N-type silicon-based solar cells are currently being used for achieving high efficiency. However, most of the photovoltaic modules already constructed are based on p-type [...]

  • I. Badmus, R. Fagbenle, O. Oyewola
    Energy Sci Eng (2013).

    Abstract
    This study analyses the fuel-mix and energy utilization patterns in Port Harcourt Refining Company from 2000 to 2011. The average fuel mix over the study period is 43% refinery [...]

  • V. Borugadda, V. Goud
    Energy Sci Eng (2015).

    Abstract
    In this paper, an eco-friendly single-step process for the synthesis of biolubricant basestock from high free fatty acid (FFA) castor oil (CO) via epoxidation reaction was [...]

  • J. Babaro, K. West, B. Hamadani
    Energy Sci Eng (2016).

    Abstract
    Spectral response measurements of germanium-based triple-junction solar cells were performed under a variety of light and voltage bias conditions. Two of the three junctions [...]

  • R. Arancon, C. Lin, K. Chan, T. Kwan, R. Luque
    Energy Sci Eng (2013). Vol. 53

    Abstract
    Increasingly tighter regulations regarding organic waste, and the demand for renewable chemicals and fuels, are pushing the manufacturing industry toward higher sustainability [...]