• F. de Armas
    Hipogrifo. Revista de literatura y cultura del Siglo de Oro (2013). Vol. 1, (1), 14

    Abstract
    This essay looks at pagan disguises utilized in plays and courtly entertainments of the Golden Age, focusing on El burlador de Sevilla. Don Juan and all those who surround [...]

  • F. Antonucci
    Hipogrifo. Revista de literatura y cultura del Siglo de Oro (2013). Vol. 1, (1), 8

    Abstract
    Los enemigos en casa is a comedy written by Lope de Vega that has been scarcely studied. The plot focuses on the enmity among two sevillian families and the serious problems [...]

  • M. Aguilar Perdomo
    Hipogrifo. Revista de literatura y cultura del Siglo de Oro (2013). Vol. 1, (1), 1

    Abstract
    In the second half of the XVII century, Spanish romances of chivalry continued providing the theater and courtly festivities with characters, topic and motifs. Antonio de [...]

  • F. Rodríguez Mansilla
    Hipogrifo. Revista de literatura y cultura del Siglo de Oro (2013). Vol. 1, (1), 17

    Abstract
    This article draws attention to a type of XVIIth century novella that has been neglected or simply studied as a derivation of other literary manifestations. My objective is [...]

  • M. Rodríguez Cáceres
    Hipogrifo. Revista de literatura y cultura del Siglo de Oro (2013). Vol. 1, (1), 5

    Abstract
    Academias morales de las musas (1642) by Antonio Enríquez Gómez is one of those miscellaneous works that make use of academia’s narrative artifice in order to compile [...]

  • R. Rice
    Hipogrifo. Revista de literatura y cultura del Siglo de Oro (2013). Vol. 1, (1), 9

    Abstract
    Starting in 1650, Calderón de la Barca assigned a new role to the ‘loa’, elevating it artistically to the level of the ‘auto’. In America, Sor Juana Inés de la Cruz [...]

  • Á. Pascual Chenel
    Hipogrifo. Revista de literatura y cultura del Siglo de Oro (2013). Vol. 1, (1), 2

    Abstract
    In a Catholic monarchy, it is to be expected that religion played a transcendentally important role. Not just from a spiritual standpoint, however, but far beyond that, it [...]

  • C. Osswald
    Hipogrifo. Revista de literatura y cultura del Siglo de Oro (2013). Vol. 1, (1), 18

    Abstract
    The canonization of the founder of a Catholic religious order constitutes a milestone in the affirmation of authority by that order. As concerns to the Society of Jesus, it [...]

  • E. Marigno
    Hipogrifo. Revista de literatura y cultura del Siglo de Oro (2013). Vol. 1, (1), 12

    Abstract
    From Homage to Quevedo (1969) of the Mexican artist Jose Luis Cuevas, I present the question of the game in Francisco de Quevedo, and, especially, in the illustrations that [...]

  • B. López de Mariscal
    Hipogrifo. Revista de literatura y cultura del Siglo de Oro (2013). Vol. 1, (1), 6

    Abstract
    When relating his journey, Friar Diego de Ocaña describes two festivities celebrated in Villa de Potosí, both dedicated to the enthronement of images of the Virgin painted [...]

  • M. Colón Calderón, A. Rodríguez de Ramos
    Hipogrifo. Revista de literatura y cultura del Siglo de Oro (2013). Vol. 1, (2), 39

    Abstract
    Se da noticia de la aparición de la página web "Semanas del jardín: Cervantes-Boccaccio un año en la vida de dos escritores".

  • C. Perugini
    Hipogrifo. Revista de literatura y cultura del Siglo de Oro (2013). Vol. 1, (2), 29

    Abstract
    En la biografía novelada se juntan, aparentemente contradictorios, el aspecto documental y científico de la historia con el subjetivismo y lo imaginativo de la ficción.Las [...]

  • V. Roncero
    Hipogrifo. Revista de literatura y cultura del Siglo de Oro (2013). Vol. 1, (1), 16

    Abstract
    Presentación de Hipogrifo.

  • Mathematical Models and Methods in Applied Sciences (2013). Vol. 23 (2), pp. 339–367

    Abstract
    We propose a fully Lagrangian monolithic system for the simulation of the underwater implosion of cylindrical aluminum containers. A variationally stabilized form of the Lagrangian [...]

  • R. Rossi, F. Mossaiby, S. Idelsohn
    Computers & Fluids (2013). Vol. 81, pp. 134-144

    Abstract
    The rise of GPUs in modern high-performance systems increases the interest in porting portion of codes to such hardware. The current paper aims to explore the performance [...]

  • P. Dadvand, R. Rossi, M. Gil, X. Martorell, J. Cotela, E. Juanpere, S. Idelsohn, E. Oñate
    Computers and Fluids (2013). Vol. 80, pp. 301-309

    Abstract
    Creating a highly parallelizable code is a challenge specially for Distributed Memory Machines (DMMs). Moreover, algorithms and data structures suitable for these platforms [...]

  • R. Rossi, J. Cotela, N. Lafontaine, P. Dadvand, S. Idelsohn
    Computers and Fluids (2013). Vol. 80, pp. 342-355

    Abstract
    The present article describes a simple element-driven strategy for the conforming refinement of simplicial finite element meshes in a distributed environment. The proposed [...]

  • M. Storti, R. Paz, L. Dalcin, S. Costarelli, S. Idelsohn
    Computers and Fluids (2013). Vol. 74, pp. 44-57

    Abstract
    Graphic processing units have received much attention in last years. Compute-intensive algorithms operating on multidimensional arrays that have nearest neighbor dependency [...]

  • Int. J. Numer. Meth. Fluids (2013). Vol. 73 (4), pp. 323-343

    Abstract
    A finite point method for solving compressible flow problems involving moving boundaries and adaptivity is presented. The numerical methodology is based on an upwind‐biased [...]

  • Int. J. Numer. Meth. Fluids (2013). Vol. 72 (12), pp. 1219-1243

    Abstract
    In this paper, we present an explicit formulation for reduced‐order models of the stabilized finite element approximation of the incompressible Navier–Stokes equations. [...]

  • S. Idelsohn, N. Nigro, J. Gimenez, R. Rossi, J. Marti
    Engineering Computations (2013). Vol. 30 (2), pp. 197-222

    Abstract
    Purpose   – The purpose of this paper is to highlight the possibilities of a novel Lagrangian formulation in dealing with the solution [...]

  • Comput. Methods Appl. Mech. Engrg., (2013). Vol. 267, pp. 23-42

    Abstract
    In this work, a domain decomposition strategy for non-linear hyper-reduced-order models is presented. The basic idea consists of restricting the reduced-order basis functions [...]

  • Computational Mechanics (2013). Vol. 52 (3), pp. 607-629

    Abstract
    Underground construction involves all sort of challenges in analysis, design, project and execution phases. The dimension of tunnels and their structural requirements are [...]

  • Int. J. Numer. Meth. Engng. (2013). Vol. 95 (8), pp. 631-660

    Abstract
    A new bilinear four‐noded quadrilateral element (called quadrilateral linear refined zigzag) for the analysis of composite laminated and sandwich plates/shells based on [...]

  • Comput. Methods Appl. Mech. Engrg., (2013). Vol. 255 (1), pp. 210-225

    Abstract
    A fully Lagrangian compressible numerical framework for the simulation of underwater implosion of a large air bubble is presented. Both air and water are considered compressible [...]

  • E. Oñate, J. Carbonell
    (2013). Research Report, Nº PI393

    Abstract
    We present a mixed velocity-pressure finite element formulation for solving the updated Lagrangian equations for quasi and fully incompressible fluids. Details of the governing [...]

  • J. Ortolano, J. Hernández, J. Oliver
    Monograph CIMNE (2013). M135

    Abstract
    One of the most important engineering tasks over the years has been the design and manufacture of increasingly sophisticated structural materials as a result of the requirements [...]

  • E. Soudah, M. Bordone, E. Kwee, T. Loong, C. Tan, P. Uei, N. Sriram
    Monograph CIMNE (2013). M137

    Abstract
    The aim of this document is to report the study process and the work carried on by CIMNE, in order that NTU and TTSH can validate the AAA results obtained during this analysis. [...]

  • R. Morán, M. Toledo
    Monograph CIMNE (2013). M138

    Abstract
    Este trabajo es el fruto de una tesis doctoral cuyo objetivo principal es definir criterios de diseño de protecciones en forma de repié en presas de materiales [...]

  • D. Mora, J. Oliver, A. Huespe
    Monograph CIMNE (2013). M139

    Abstract
    Cementitious materials such as mortar or concrete are brittle and have an inherent weakness in resisting tensile stresses. The addition of discontinuous fibers to such matrices [...]

  • K. Kamran, E. Oñate, S. Idelsohn, R. Rossi
    Monograph CIMNE (2014). M150

    Abstract
    The development of efficient algorithms to understand implosion dynamics presents a number of challenges. The foremost challenge is to efficiently represent the coupled compressible [...]

  • L. Suárez
    International Journal of Natural Disasters, Accidents and Civil Infrastructure (2013). Vol. 13, (1)

    Abstract
    Congresos y Seminarios

  • C. González, M. Santiago
    International Journal of Natural Disasters, Accidents and Civil Infrastructure (2013). Vol. 13, (1)

    Abstract
    Hoy día se requiere que ingenieros militares implementen metodologías de diseño capaces de predecir el rendimiento de los pavimentos basado en información de campo limitada. [...]

  • F. Martínez, M. Estrada
    International Journal of Natural Disasters, Accidents and Civil Infrastructure (2013). Vol. 13, (1)

    Abstract
    Debido a los cambios climáticos que generan humedad en las zonas tropicales, el pavimento presenta cierta susceptibilidad a fallar por el desprendimiento de la película [...]

  • M. Pérez
    International Journal of Natural Disasters, Accidents and Civil Infrastructure (2013). Vol. 13, (1)

    Abstract
    La Administración Federal de Carreteras (FHWA, por sus siglas en inglés) del Departamento de Transportación Federal de los Estados Unidos estableció un programa innovador [...]

  • Y. Cruz-Cantillo, I. Cruzado
    International Journal of Natural Disasters, Accidents and Civil Infrastructure (2013). Vol. 13, (1)

    Abstract
    Los segmentos de carreteras que unen las zonas de alta velocidad con las zonas de baja velocidad son conocidos como zonas de transición; es en estas zonas que los conductores [...]

  • F. González, A. Medina
    International Journal of Natural Disasters, Accidents and Civil Infrastructure (2013). Vol. 13, (1)

    Abstract
    Las infracciones a la señal roja ("Red-Light Running", RLR) en una intersección con semáforo es un grave problema de seguridad. Un estudio de [...]

  • M. Rodríguez
    International Journal of Natural Disasters, Accidents and Civil Infrastructure (2013). Vol. 13, (1)

    Abstract
    Durante los pasados años, el gobierno federal ha requerido que las autoridades de transporte público informen sobre incidencias de seguridad en sus servicios de transportación. [...]

  • C. Aponte, J. Ortiz
    International Journal of Natural Disasters, Accidents and Civil Infrastructure (2013). Vol. 13, (1)

    Abstract
    Con el tiempo hemos observado como el sistema vial de Puerto Rico se ha desarrollado. Desde las vías de mayor importancia en décadas pasadas, como la PR-1, PR-2 y PR-3; [...]

  • H. Ordóñez
    International Journal of Natural Disasters, Accidents and Civil Infrastructure (2013). Vol. 13, (1)

    Abstract
    En esta ponencia se presenta la complejidad de la problemática de la inseguridad vial y las diferentes ramificaciones de manera específica y pragmática. [...]

  • B. Ríos
    International Journal of Natural Disasters, Accidents and Civil Infrastructure (2013). Vol. 13, (1)

    Abstract
    Editorial: La seguridad en la infraestructura vial: Un compromiso de todos

  • J. Abreu, L. Godoy
    International Journal of Natural Disasters, Accidents and Civil Infrastructure (2013). Vol. 13, (2)

    Abstract
    Errata "Investigación de causas de explosiones en una planta de almacenamiento de combustible en Puerto Rico"

  • M. Zeballos, A. Adami, R. Terzariol, R. Rocca
    International Journal of Natural Disasters, Accidents and Civil Infrastructure (2013). Vol. 13, (2)

    Abstract
    El limo arenoso de las formaciones loéssicas se caracteriza por su alta sensibilidad a los cambios de humedad. Esta condición lo cataloga como internamente inestable. A [...]

  • A. Tena Colunga, H. Hernández
    International Journal of Natural Disasters, Accidents and Civil Infrastructure (2013). Vol. 13, (2)

    Abstract
    En este trabajo los autores resumen los resultados de un estudio paramétrico dedicado a evaluar, mediante análisis estáticos no lineales (pushover), parámetros [...]

  • E. Tapia-Hernandez
    International Journal of Natural Disasters, Accidents and Civil Infrastructure (2013). Vol. 13, (2)

    Abstract
    El presente artículo estudia la factibilidad de efectuar predicciones de sismos, así como el estado actual de los estudios relacionados con sustento científico. El artículo [...]

  • F. Oliveira, M. Alves, C. Oliveira
    International Journal of Natural Disasters, Accidents and Civil Infrastructure (2013). Vol. 13, (2)

    Abstract
    O presente trabalho visou determinar e padronizar parâmetros do solo, para avaliação de áreas para disposição de resíduos provenientes das atividades humanas, levando-se [...]

  • B. Natalini, M. Natalini
    International Journal of Natural Disasters, Accidents and Civil Infrastructure (2013). Vol. 13, (2)

    Abstract
    La valoración de la acción del viento sobre un edificio en la etapa de diseño requiere conocer la magnitud de las máximas velocidades de viento a las que estará expuesta [...]

  • P. Gyssels, M. Ragessi, A. Rodriguez, J. Cardini, M. Campos
    International Journal of Natural Disasters, Accidents and Civil Infrastructure (2013). Vol. 13, (2)

    Abstract
    El frente costero urbano al sur de Punta Mogotes (Mar del Plata, Buenos Aires) padece desde hace años un fenómeno de erosión progresiva debido a factores naturales y de [...]

  • R. Rocca, M. Herz
    International Journal of Natural Disasters, Accidents and Civil Infrastructure (2013). Vol. 13, (2)

    Abstract
    Editorial: La carencia de uniformidad en el riesgo de carreteras en zonas montañosas

  • Journal of Computational Physics (2013). 252:382-403 (preprint)

    Abstract
    Being capable of predicting seakeeping capabilities in the time domain is of great interest for the marine and offshore industry. However, most computer programs used in the [...]

  • J. Japón, I. Sánchez-Barbudo
    Rev. int. métodos numér. cálc. diseño ing. (2013). Vol. 29, (3)

    Abstract
    Curved graphs that relate the f/L ratio and the λ = qL3 /EIy parameter for clamped arches with the different calculation hypothesis are going to be proposed in this article. [...]

  • I. Bonola, J. Avilés
    Rev. int. métodos numér. cálc. diseño ing. (2013). Vol. 29, (1)

    Abstract
    A finite layer method for evaluation of the effects of seismic action on retaining walls is presented, which is based on the wave propagation theory and modal superposition. [...]

  • P. Vieira, W. Matias Silva
    Rev. int. métodos numér. cálc. diseño ing. (2013). Vol. 29, (3)

    Abstract
    The ultimate limit state criteria (yielding surfaces) applied to structural designs are easier in stress resultants. There are many difficulties to generating interaction [...]

  • E. Tellechea, O. Sabri, M. Ariza
    Rev. int. métodos numér. cálc. diseño ing. (2013). Vol. 29, (3)

    Abstract
    Motion of screw dislocations in BCC materials at low temperature is believed to be related to the formation of mobile kinks on the dislocation line. Therefore, the accurate [...]

  • V. Ruas, R. Leal-Toledo, M. Kischinhevsky
    Rev. int. métodos numér. cálc. diseño ing. (2013). Vol. 29, (1)

    Abstract
    A mixed least-squares finite element scheme designed for solving the transient convection-diffusion equations expressed in terms of both the primal unknown and its flux, incorporating [...]

  • F. Rossomando, C. Soria, R. Carelli
    Rev. int. métodos numér. cálc. diseño ing. (2013). Vol. 29, (1)

    Abstract
    This paper presents the design of an algorithm based on neural networks in discrete time for its application in mobile robots. In addition, the system stability is analyzed [...]

  • E. Puente, M. Lázaro, O. Abreu, J. Capote, D. Alvear
    Rev. int. métodos numér. cálc. diseño ing. (2013). Vol. 29, (4)

    Abstract
    The pyrolysis models undergoes a fast development due to the enhancement of both the computational power and the new test used to characterize the behaviour of materials under [...]

  • F. Masson, D. González, E. Cueto, F. Chinesta
    Rev. int. métodos numér. cálc. diseño ing. (2013). Vol. 29, (2)

    Abstract
    Dynamic Data Driven Application Systems (DDDAS) appear as a new paradigm in the field of applied sciences and engineering, and in particular in simulation-based engineering [...]

  • A. Hidalgo, J. Jalón
    Rev. int. métodos numér. cálc. diseño ing. (2013). Vol. 29, (4)

    Abstract
    This article shows an efficient implementation of a dynamic semi-recursive formulation for large and complex multibody system simulations, with interesting applications in [...]

  • E. Hernández-Martínez, S. Valdez-Peña, E. Sánchez-Soto
    Rev. int. métodos numér. cálc. diseño ing. (2013). Vol. 29, (4)

    Abstract
    The direct kinematics problem for parallel robots can be stated as follows: given values of the joint variables, the corresponding Cartesian variable values, the pose of the [...]

  • D. Garzón-Alvarado, A. Ramírez-Martínez, C. Daza
    Rev. int. métodos numér. cálc. diseño ing. (2013). Vol. 29, (4)

    Abstract
    In this paper we have developed the numerical solution of two problems of diffusion-convection (DC), using the finite element method of Streamline Upwind Petrov-Galerkin (SUPG). [...]

  • R. Souza
    Rev. int. métodos numér. cálc. diseño ing. (2013). Vol. 29, (1)

    Abstract
    Reinforced concrete elements subjected to membrane forces, i.e., elements subjected to in-plane shear and axial stresses are very common for modeling complex structures such [...]

  • C. Saracibar, R. López, B. Ducoeur, M. Chiumenti, B. Meester
    Rev. int. métodos numér. cálc. diseño ing. (2013). Vol. 29, (1)

    Abstract
    The motivation of this work is the modeling of the hardening precipitate and hardness evolutions of fully hardened heat treatable aluminium alloys during friction stir welding [...]

  • J. Curiel-Sosa, D. Owen
    Rev. int. métodos numér. cálc. diseño ing. (2013). Vol. 29, (2)

    Abstract
    Simulation problems involving non-linear materials imply in numerous cases divergence of the implicit method which use return mapping algorithms for modelling of the nonlinear [...]

  • J. Cervera, J. Ortiz, M. Vázquez, A. Aznar
    Rev. int. métodos numér. cálc. diseño ing. (2013). Vol. 29, (2)

    Abstract
    The verification of the slender compressed members of a structure is a well formulated and codified problem. However, the non-linearity of the design process, combined with [...]

  • E. Brea
    Rev. int. métodos numér. cálc. diseño ing. (2013). Vol. 29, (3)

    Abstract
    This article presents a new algorithm based on the Nelder-Mead simplex algorithmic method for identifying a local optimum, at least on unconstrained nonlinear mixed-integer [...]

  • D. Lázaro, E. Puente, M. Lázaro, J. Capote, D. Alvear
    Rev. int. métodos numér. cálc. diseño ing. (2013). Vol. 29, (3)

    Abstract
    In recent years there has been extensive development of the fire computer models, and its use in the study of the fire safety, fire investigation, etc. has been increased. [...]

  • H. Terres-Peña, J. Morales-Gómez, A. Lizardi-Ramos, R. López-Callejas, R. Portillo-Vélez
    Rev. int. métodos numér. cálc. diseño ing. (2013). Vol. 29, (2)

    Abstract
    In this work, results of efficiencies for first and second law of thermodynamics applied to four box-type solar cookers with internal reflectors are shown. The solar cooker [...]

  • Y. Vargas, L. Pujades, A. Barbat, J. Hurtado
    Rev. int. métodos numér. cálc. diseño ing. (2013). Vol. 29, (2)

    Abstract
    Currently, many structures existing in seismic areas are highly vulnerable because they have been built without the use of seismic design codes or by using outdated codes. [...]

  • M. Galdo, C. Vidal, J. García
    Rev. int. métodos numér. cálc. diseño ing. (2013). Vol. 29, (4)

    Abstract
    In this paper, the numerical method level set has been used to model the combustion process in an Otto two-stroke engine. The level set has been implemented in a CFD (Computational [...]

  • C. H., A. Coutinho
    Rev. int. métodos numér. cálc. diseño ing. (2013). Vol. 29, (4)

    Abstract
    In this work we use the Unusual Stabilized Finite Element Method (USFEM) associated to Rothes method for solving the redistancing problem in the Level Set Method . Rothes [...]

  • V. Cortínez, P. Domínguez
    Rev. int. métodos numér. cálc. diseño ing. (2013). Vol. 29, (1)

    Abstract
    In order to design or redesign urban transportation networks, the employment of mathematical models is very useful for predicting the effects of possible modifications of [...]

  • X. Cahís, A. Benavent-Climent, A. Goñi
    Rev. int. métodos numér. cálc. diseño ing. (2013). Vol. 29, (4)

    Abstract
    Waffle-flat-plate structures have been widely used for residential and office buildings in the South of Europe between the seventies and nineties of the last century. These [...]

  • D. Ortega, G. Gutiérrez, A. Iznaga, T. Rodríguez, M. Beule, B. Verhegghe
    Rev. int. métodos numér. cálc. diseño ing. (2013). Vol. 29, (4)

    Abstract
    Description of mechanical behavior of hard tissues by means of discrete models goes through various stages of analysis, which range from digital image processing to the specification [...]

  • H. Ramírez-León, C. Couder-Castañeda, I. Herrera-Díaz, H. Barrios-Piña
    Rev. int. métodos numér. cálc. diseño ing. (2013). Vol. 29, (2)

    Abstract
    This work contributes to the study of nuclear plant thermal discharges in coastal areas by using a numerical model which solves the Navier-Stokes-Reynolds equations for shallow [...]

  • E. Flores-Méndez, M. Carbajal-Romero, N. Flores-Guzmán, J. Núñez-Farfán
    Rev. int. métodos numér. cálc. diseño ing. (2013). Vol. 29, (3)

    Abstract
    This work shows the wave propagation in fluid-solid interfaces due to dynamic excitations, such interface waves are known as Scholtes waves. We studied a wide range of elastic [...]

  • J. Ramírez, D. Leducq, M. Arellano, G. Álvarez
    Rev. int. métodos numér. cálc. diseño ing. (2013). Vol. 29, (4)

    Abstract
    Freezing is an important step in the manufacturing process of ice-cream and sorbet, since the operating conditions have a strong influence on the micro-structure, and consequently [...]

  • A. Garriga, C. Spa, L. Pozo
    Rev. int. métodos numér. cálc. diseño ing. (2013). Vol. 29, (1)

  • . Informe
    (2008). Technical Report, IT547

  • M. Kouhi, E. Oñate, G. Bugeda
    Monograph CIMNE (2013). M140

    Abstract
    This work covers a contribution to two most interesting research fields in aerodynamics, the finite element analysis of high-speed compressible flows (Part I) and aerodynamic [...]

  • F. Salazar, J. Mauro, J. Irazábal, A. Larese, . R. Rossi, E. Oñate, R. Morán, M. Toledo
    (2013). Research Report, Nº PI396

    Abstract
    El Centro Internacional de Métodos Numéricos en Ingeniería (CIMNE) es un centro de investigación dependiente del Gobierno de Cataluña y [...]