Abstract

The end-grain bonding of timber components with the Timber Structures 3.0 technology (TS3) is an emerging construction method in timber engineering. For onsite applications at low ambient temperatures down to 0 °C, it is being investigated numerically and experimentally if it’s possible to heat the butt-joint to above 17 °C during the curing process using a heating wire. The current research results show that this is basically possible.


The PDF file did not load properly or your web browser does not support viewing PDF files. Download directly to your device: Download PDF document

Full Paper

The PDF file did not load properly or your web browser does not support viewing PDF files. Download directly to your device: Download PDF document
Back to Top
GET PDF

Document information

Published on 05/07/22
Submitted on 05/07/22

Volume 1600 Geomechanics and Natural Materials, 2022
DOI: 10.23967/wccm-apcom.2022.104
Licence: CC BY-NC-SA license

Document Score

0

Views 5
Recommendations 0

Share this document

claim authorship

Are you one of the authors of this document?