JOURNALS

Documents published in Scipedia

• On the simulation of flows with violent free surface motion

  R. Löhner, C. Yang, E. Oñate

  (2006). Research Report, Nº PI281

  
  

  Abstract

  A volume of fluid (VOF) technique has been developed and coupled with an incompressible Euler/Navier–Stokes solver operating on adaptive, unstructured grids to simulate the interactions of extreme waves and three-dimensional structures. The present implementation follows the classic VOF implementation for the liquid–gas system, considering only the liquid phase. Extrapolation algorithms to obtain velocities and pressure in the gas region near the free surface have been implemented. The VOF technique is validated against the classic dam-break problem, as well as series of 2D sloshing experiments and results from smoothed particle hydrodynamics (SPH) calculations. These and a series of other examples demonstrate that the present CFD method is capable of simulating violent free surface flows with strong nonlinear behavior.

  Abstract
  A volume of fluid (VOF) technique has been developed and coupled with an incompressible Euler/Navier–Stokes solver operating on adaptive, unstructured grids to simulate [...]

  • 12
  •  read

• Coupling of Feflo with Simpact

  J. Arteaga-Gomez, R. Löhner, J. Rojek, E. Oñate

  (2006). Research Report, Nº PI280

  
  

  Abstract

  This paper describes the coupling of FEFLO, a general purpose compressible and incompressible flow solver base on adaptive unstructured grids with SIMPACT, a general purpose, large deformation, explicit structural dynamics code developed at the Center for Numerical Methods in Engineering (CIMNE). Details on the codes, as well as the compiling strategy employed are given. Examples illustrate the possibilies the present fluid-structure capability offers.

  Abstract
  This paper describes the coupling of FEFLO, a general purpose compressible and incompressible flow solver base on adaptive unstructured grids with SIMPACT, a general purpose, [...]

  • 7
  •  read

• Centre Internacional de Mètodes Numèrics en Enginyeria (CIMNE). Vint anys d'historia

  E. Oñate

  (2007). Research Report, Nº PI312

  
  

  Abstract

  El CIMNE (www.cimne.com), un centre de recerca consorci entre la Universitat Politècnica de Catalunya i la Generalitat de Catalunya, fa vint anys. El CIMNE està especialitzat en el desenvolupament i l’aplicació de mètodes numèrics avançats per a la solució d’un ampli ventall de problemes en enginyeria, que van des de la mecánica de sòlids i estructures, fins als processos de fabricació, passant per les TIC i els sistemes de suport a la decisió per a la prevenció i el tractament de catàstrofes naturals, com poden ser les inundacions o els vessaments de productes tòxics. El CIMNE es posiciona com un centre clau en el paper del desenvolupament d’idees originades en entorns de recerca bàsica i la seva transferència al sector industrial, per a la seva posterior industrialització i comercialització.

  Abstract
  El CIMNE (www.cimne.com), un centre de recerca consorci entre la Universitat Politècnica de Catalunya i la Generalitat de Catalunya, fa vint anys. El CIMNE està [...]

  • 7
  •  read

• A finite point method for three-dimensional compressible flow

  E. Ortega, E. Oñate, S. Idelsohn

  (2007). Research Report, Nº PI310

  
  

  • 4
  •  read

• Shape optimization in aeronautical applications using neural networks

  A. Daring, R. López, R. Flores, G. Bugeda, E. Oñate

  (2007). Research Report, Nº PI306

  
  

  Abstract

  An optimization methodology based on neural networks was developed for use in 2D optimal shape design problems. Neural networks were used as a parameterization scheme to represent the shape function, and an edge-based high-resolution scheme for the solution of the compressible Euler equations was used to model the flow around the shape. The global system incorporates neural networks and the Euler fluid solver into the C++ Flood optimization framework containing a library of optimization algorithms. The optimization scheme was applied to a minimal drag problem in an unconstrained optimization case and a constrained case in hypersonic flow using evolutionary training algorithms. The results indicate that the minimum drag problem is solved to a high degree of accuracy but at high computational cost. For more complex shapes, parallel computing methods are required to reduce computational time.

  Abstract
  An optimization methodology based on neural networks was developed for use in 2D optimal shape design problems. Neural networks were used as a parameterization scheme to represent [...]

  • 5
  •  read

• Computation of turbulent flows using a finite element formulation

  E. Oñate, A. Valls, J. García-Espinosa

  (2007). Research Report, Nº PI304

  
  

  Abstract

  We present a formulation for analysis of turbulent incompressible flows using a stabilized finite element method (FEM) based on the finite calculus (FIC) procedure. The stabilization terms introduced by the FIC approach allow to solve a wide range of fluid flow problems at different Reynolds numbers, including turbulent flows, without the need of a turbulence model. Examples of application of the FIC/FEM formulation to the analysis of 2D and 3D incompressible flows at large Reynolds numbers exhibiting turbulence features are presented.

  Abstract
  We present a formulation for analysis of turbulent incompressible flows using a stabilized finite element method (FEM) based on the finite calculus (FIC) procedure. The stabilization [...]

  • 11
  •  read

• Enhanced Rotation-Free Basic Shell Triangle. Applications to Sheet Metal Forming

  E. Oñate, F. Flores, L. Neamtu

  (2007). Research Report, Nº PI302

  
  

  Abstract

  An enhanced rotation-free three node triangular shell element (termed EBST) is presented. The element formulation is based on a quadratic interpolation of the geometry in terms of the six nodes of a patch of four triangles associated to each triangular element. This allows to compute an assumed constant curvature field and an assumed linear membrane strain field which improves the in-plane behaviour of the element. A simple and economic version of the element using a single integration point is presented. The implementation of the element into an explicit dynamic scheme is described. The efficiency and accuracy of the EBST element and the explicit dynamic scheme are demonstrated in many examples of application including the analysis of a cylindrical panel under impulse loading and sheet metal stamping problems.

  Abstract
  An enhanced rotation-free three node triangular shell element (termed EBST) is presented. The element formulation is based on a quadratic interpolation of the geometry in [...]

  • 14
  •  read

• Membranes structures formed by low pressure inflatable tubes. New analysis methods and recent constructions

  E. Oñate, F. Flores, J. Marcipar

  (2007). Research Report, Nº PI303

  
  

  Abstract

  This paper shows applications of a recently developed thin shell element adequate for the analysis of membrane and inflatable structures. The element is a three node triangle with only translational degrees of freedom that uses the configuration of the three adjacent elements to evaluate the strains in terms of the nodal displacements only. This allows to compute (constant) bending strains and (linear) membrane strains using a total Lagrangian formulation. Several examples, including inflation and deflation of membranes and some practical applications to the analysis, design and construction of membrane structures formed by low pressure inflatable tubes are presented.

  Abstract
  This paper shows applications of a recently developed thin shell element adequate for the analysis of membrane and inflatable structures. The element is a three node triangle [...]

  • 190
  •  read

• Posibilidades de los métodos numéricos en obras subterráneas

  E. Oñate, B. Suárez, J. Canet

  (2007). Research Report, Nº PI301

  
  

  Abstract

  Se presenta un resumen de las posibilidades de diversos métodos numéricos basados en la combinación de técnicas de elementos finitos y de partículas para la simulación de problemas típicos de obras subterráneas, tales como la excavación de túneles y la inundación de cavidades.

  Abstract
  Se presenta un resumen de las posibilidades de diversos métodos numéricos basados en la combinación de técnicas de elementos finitos y de partículas [...]

  • 20
  •  read

• Robust design methods in aerospace engineering

  M. Kouhi, E. Oñate, G. Bugeda

  (2008). Research Report, Nº PI328

  
  

  Abstract

  This document is an introduction to some important methodologies that have been developed in robust design in aerospace engineering. After describing the concept of robustness and uncertainty, multipoint, minimax, expected value, second order second moment and Taguchi methods are mentioned. At the end of this report, Game Theory, as one of the approach for multi objective optimization problems has been introduced.

  Abstract
  This document is an introduction to some important methodologies that have been developed in robust design in aerospace engineering. After describing the concept of robustness [...]

  • 18
  •  read