COLLECTIONS

Sort publications:

Scope

Scope

Documents published in Scipedia

  • C. Agelet de Saracibar, M. Chiumenti, M. Cervera, Q. Valverde
    Monograph Series on Computational Modeling of Forming Processes, editor C. Agelet (2004). CMFP2, ISBN: 84-95999-62-5

    Abstract
    The use of stabilization methods is becoming an increasingly well-accepted technique due to their success in dealing with numerous numerical pathologies that arise in [...]

  • C. Agelet de Saracibar, M. Chiumenti, M. Cervera, N. Dialami, D. Santiago, G. Lombera
    Monograph Series on Computational Modeling of Forming Processes, editor C. Agelet (2012). CMFP3, ISBN 84-939640-0-9

    Abstract
    This paper deals with the computational modeling and numerical simulation of the material flow around the probe tool in a Friction Stir Welding (FSW) process. Within the paradigmatic [...]

  • X. Lu, X. Lin, M. Chiumenti, M. Cervera, Y. Hu, X. Ji, L. Ma, H. Yang, W. Huang
    Additive Manufacturing (2019). (preprint) Vol. 26, pp. 166-179

    Abstract
    Residual stresses and distortion in Additive Manufactured (AM) parts are two key obstacles which seriously hinder the wide application of this technology. Nowadays, understanding [...]

  • X. Lu, X. Lin, M. Chiumenti, M. Cervera, Y. Hu, X. Ji, L. Ma, W. Huang
    Int. J. Mechanical Sciences (2019). (preprint) Vol. 153-154, pp. 119-130

    Abstract
    Residual stresses and distortions are two technical obstacles for popularizing the additive manufacturing (AM) technology. The evolution of the stresses in AM components during [...]

  • G. Vlachakis, M. Cervera, G. Barbat, S. Salaustros
    Engineering Failure Analysis (2019). (preprint) Vol. 97, pp. 534-555

    Abstract
    The out-of-plane response is a complex and at the same time key aspect of the seismic vulnerability of masonry structures. It depends on several factors, some of which are [...]

  • N. Dialami, M. Cervera, M. Chiumenti
    Metals (2019). Vol. 9 (1), pp. 28-45

    Abstract
    This work studies the effect of the tool tilt angle on the generated heat and the material flow in the work pieces joint by Friction Stir Welding (FSW). An apropos kinematic [...]

  • N. Dialami, M. Cervera, M. Chiumenti, A. Segatori
    Int. J. Mechanical Sciences (2019). Vol. 151, pp. 61-69

    Abstract
    This work studies computationally and experimentally the joint line remnant defects emerging in friction stir welding (FSW) due to oxide layer propagation into the weld. A [...]

  • S. Salaustros, M. Cervera, L. Pelà
    Archives of Comp. Meths. Engng. (2018). (preprint) Published online, pp. 1-45

    Abstract
    The importance of crack propagation in the structural behaviour of concrete and masonry structures has led to the development of a wide range of finite element methods for [...]

  • E. Salsi, M. Chiumenti, M. Cervera
    Metals (2018). Vol. 8 (8), pp. 633-657

    Abstract
    AM processes are characterized by complex thermal cycles that have a deep influence on the microstructural transformations of the deposited alloy. In this work, a general [...]

  • J. González, M. Chiumenti, M. Cervera, C. Agelet de Saracibar, F. Samaniego, I. Cobo
    Fusion Engineering and Design (2018). (preprint) Vol. 135, Part A, pp. 65-73

    Abstract
    The objective of ITER is to build a new Tokamak, with the goal of demonstrating the scientific and technical feasibility of fusion power. The First Wall Panels are the inner [...]

Articles (Documents not available in Scipedia)

  • 3D numerical modelling of twisting cracks under bending and torsion of skew notched beams

    L Benedetti, M Cervera, M Chiumenti

    Engineering Fracture Mechanics 176, 235-256, 2017

  • Numerical simulation and experimental calibration of Additive Manufacturing by blown powder technology. Part I: thermal analysis

    M Chiumenti, X Lin, M Cervera, W Lei, Y Zheng, W Huang

    Rapid Prototyping Journal 23 (2), 2017

  • Local-global strategy for the prediction of residual stresses in FSW processes

    N Dialami, M Cervera, M Chiumenti, CA de Saracibar

    International Journal of Advanced Manufacturing Technology 88 (9), 3099–3111, 2017

  • A fast and accurate two-stage strategy to evaluate the effect of the pin tool profile on metal flow, torque and forces in friction stir welding

    N Dialami, M Cervera, M Chiumenti, CA de Saracibar

    International Journal of Mechanical Sciences 122, 215–227, 2017

  • Finite Element Modelling of Internal and Multiple Localized Cracks

    S Saloustros, L Pelà, M Cervera, P Roca

    Computational Mechanics 59 (2), 299–316, 2017

  • Modelling of Bingham and Herschel–Bulkley flows with mixed P1/P1 finite elements stabilized with orthogonal subgrid scale

    E Moreno, A Larese, M Cervera

    Journal of Non-Newtonian Fluid Mechanics 228, 1-16, 2016

  • Thermodynamically consistent plastic-damage framework for localized failure in quasi-brittle solids: material model and strain localization analysis

    JY Wu, M Cervera

    Journal of Solids and Structures 87, 227-247, 2016

  • Numerical modeling of the electron beam welding and its experimental validation

    M Chiumenti, M Cervera, N Dialami, B Wu, L Jinwei, CA de Saracibar

    Finite Elements in Analysis and Design 121, 118-133, 2016

  • Analysis of the effect of provisional ties on the construction and current deformation of Mallorca Cathedral

    L Pelà, J Bourgeois, P Roca, M Cervera, M Chiumenti

    International Journal of Architectural Heritage 10 (4), 418-437, 2016

  • Challenges in thermo-mechanical analysis of Friction Stir Welding processes

    N Dialami, M Chiumenti, M Cervera, C Agelet de Saracibar

    Archives of Computational Methods in Engineering, 1-37, 2016

  • 3D numerical models using a fluid or a solid formulation of FSW processes with a non-cylindrical pin

    P Bussetta, N Dialami, M Chiumenti, CA de Saracibar, M Cervera, ...

    Advanced Modeling and Simulation in Engineering Sciences 2 (27), 1-19, 2015

  • A crack-tracking technique for localized cohesive–frictional damage

    S Saloustros, L Pelà, M Cervera

    Engineering Fracture Mechanics 150, 96-114, 2015

  • On the conformity of strong, regularized, embedded and smeared discontinuity approaches for the modeling of localized failure in solids

    M Cervera, JY Wu

    Journal of Solids and Structures 71, 19-38, 2015

  • On the equivalence between traction- and stress-based approaches for the modeling of localized failure in solids

    JY Wu, M Cervera

    Journal of the Mechanics and Physics of Solids 82, 137-163, 2015

  • Explicit mixed strain-displacement finite element for dynamic geometrically non-linear solid mechanics

    NM Lafontaine, R Rossi, M Cervera, M Chiumenti

    Computational Mechanics 55, 543-559, 2015

  • A mixed three-field FE formulation for stress accurate analysis including the incompressible limit

    M Chiumenti, M Cervera, R Codina

    Computer Methods in Applied Mechanics and Engineering 283, 1095–1116, 2015

  • Stress-accurate Mixed FEM for soil failure under shallow foundations involving strain localization in plasticity

    L Benedetti, M Cervera, M Chiumenti

    Computers and Geotechnics 64, 32-47, 2015

  • Material flow visualization in Friction Stir Welding via particle tracing

    N Dialami, M Chiumenti, M Cervera, CA de Saracibar, JP Ponthot

    International Journal of Material Forming 8 (2), 167-181, 2015

  • Mixed Stabilized Finite Element Methods in Nonlinear Solid Mechanics. Part III: Compressible and incompressible plasticity

    M Cervera, M Chiumenti, L Benedetti, R Codina

    Computer Methods in Applied Mechanics and Engineering 285, 752-775, 2015

  • Shaped metal deposition processes

    C Agelet de Saracibar, A Lundbäck, M Chiumenti, M Cervera

    Encyclopedia of Thermal Stresses, Springer, 2014

  • Numerical simulation and visualization of material flow in friction stir welding via particle tracing

    N Dialami, M Chiumenti, M Cervera, CA de Saracibar, JP Ponthot, ...

    Numerical Simulations of Coupled Problems in Engineering, 157-169, 2014

  • A localized mapped damage model for orthotropic materials

    L Pelà, M Cervera, S Oller, M Chiumenti

    Engineering Fracture Mechanics 124, 196–216, 2014

  • Computational modeling and sub-grid scale stabilization of incompressibility and convection in the numerical simulation of friction stir welding processes

    CA de Saracibar, M Chiumenti, M Cervera, N Dialami, A Seret

    Archives of Computational Methods in Engineering 21, 3-37, 2014

  • A novel stress-accurate FE technology for highly non-linear analysis with incompressibility constraint. Application to the numerical simulation of the FSW process

    M Chiumenti, M Cervera, C Agelet de Saracibar, N Dialami

    AIP conference proceedings 1532 (1), 45-56, 2013

  • Comparison of a Fluid and a Solid Approach for the Numerical Simulation of Friction Stir Welding with a Non‐Cylindrical Pin

    P Bussetta, N Dialami, R Boman, M Chiumenti, C Agelet de Saracibar, ...

    Steel Research International 85, 968–979, 2013

  • An apropos kinematic framework for the numerical modeling of friction stir welding

    N Dialami, M Chiumenti, M Cervera, CA de Saracibar

    Computers & Structures 117, 48-57, 2013

  • Continuum FE models for the analysis of Mallorca Cathedral

    P Roca, M Cervera, L Pelà, R Clemente, M Chiumenti

    Engineering Structures 46, 653-670, 2013

  • An orthotropic damage model for the analysis of masonry structures

    L Pelà, M Cervera, P Roca

    Construction and Building Materials 41 (2013) 957–967, 2013

  • Numerical modeling of friction stir welding processes

    M Chiumenti, M Cervera, C Agelet de Saracibar, N Dialami

    Computer Methods in Applied Mechanics and Engineering, 254 (2013) 353–369, 2013

  • Viscoelasticity and damage model for creep behaviour of historical masonry structures

    P Roca, M Cervera, L Pelà, R Clemente, M Chiumenti

    The Open Civil Engineering Journal, 6 (Suppl 1-M7), 188-199, 2012

  • Benchmarking on bifurcation and localization in J2 plasticity for plane stress and plane strain conditions

    M Cervera, M Chiumenti, D Di Capua

    Computer Methods in Applied Mechanics and Engineering 241, 206-224, 2012

  • Advances in the numerical simulation of 3D FSW processes

    CA de Saracibar, M Chiumenti, M Cervera, N Dialami, D Santiago, ...

    on the Proceedings of the International Symposium on Plasticity and its …, 2011

  • Mesh objective modeling of cracks using continuous linear strain and displacement interpolations

    M Cervera, M Chiumenti, R Codina

    International Journal for Numerical Methods in Engineering 87 (10), 962-987, 2011

  • Continuum damage model for orthotropic materials: Application to masonry

    L Pelà, M Cervera, P Roca

    Computer Methods in Applied Mechanics and Engineering 200 (9-12), 917-930, 2011

  • A computational model for the numerical simulation of FSW processes

    C Agelet de Saracibar, M Chiumenti, D Santiago, M Cervera, N Dialami, ...

    AIP Conference Proceedings 1252 (1), 81-88, 2010

  • A crack-tracking technique for localized damage in quasi-brittle materials

    M Cervera, L Pelà, R Clemente, P Roca

    Engineering Fracture Mechanics 77 (13), 2431-2450, 2010

  • Finite element modeling of multi-pass welding and shaped metal deposition processes

    M Chiumenti, M Cervera, A Salmi, CA De Saracibar, N Dialami, K Matsui

    Computer methods in applied mechanics and engineering 199 (37-40), 2343-2359, 2010

  • Mixed stabilized finite element methods in nonlinear solid mechanics: Part I: Formulation

    M Cervera, M Chiumenti, R Codina

    Computer Methods in Applied Mechanics and Engineering 199 (37-40), 2559-2570, 2010

  • Mixed stabilized finite element methods in nonlinear solid mechanics: Part II: Strain localization

    M Cervera, M Chiumenti, R Codina

    Computer Methods in Applied Mechanics and Engineering 199 (37), 2571-2589, 2010

  • Structural analysis of masonry historical constructions. Classical and advanced approaches

    P Roca, M Cervera, G Gariup, L Pelà

    Archives of Computational Methods in Engineering 17 (3), 299-325, 2010

  • Seismic safety analysis of historical masonry structures using a damage constitutive model

    J Murcia-Delso, AK Das, M Roca, M Cervera

    Thematic conference on computational methods in structural dynamics and …, 2009

  • Size effect and localization in J2 plasticity

    M Cervera, M Chiumenti

    International Journal of Solids and Structures 46 (17), 3301-3312, 2009

  • El modelo de daño localizado aplicado al análisis de estructuras de obra de fábrica

    R Clemente, M Cervera Ruiz, P Roca Fabregat

    Revista internacional de métodos numéricos para cálculo y diseño en …, 2008

  • On the numerical modeling of the thermomechanical contact for metal casting analysis

    M Chiumenti, CA de Saracibar, M Cervera

    Journal of Heat Transfer 130 (6), 061301, 2008

  • An orthotropic mesh corrected crack model

    M Cervera

    Computer Methods in Applied Mechanics and Engineering 197 (17-18), 1603-1619, 2008

  • A smeared‐embedded mesh‐corrected damage model for tensile cracking

    M Cervera

    International journal for numerical methods in engineering 76 (12), 1930-1954, 2008

  • Análisis estructural de edificios históricos mediante modelos localizados de fisuración

    R Clemente, M Cervera, P Roca

    Centro Internacional de Métodos Numéricos en Ingeniería, 2007

  • Damage model with crack localization–Application to historical buildings

    R Clemente, P Roca, M Cervera

    Structural Analysis of Historical Constructions, New Delhi, India, 2006

  • On the orthogonal subgrid scale pressure stabilization of finite deformation J2 plasticity

    CA de Saracibar, M Chiumenti, Q Valverde, M Cervera

    Computer Methods in Applied Mechanics and Engineering 195 (9-12), 1224-1251, 2006

  • Smeared crack approach: back to the original track

    M Cervera, M Chiumenti

    International journal for numerical and analytical methods in geomechanics …, 2006

  • Mesh objective tensile cracking via a local continuum damage model and a crack tracking technique

    M Cervera, M Chiumenti

    Computer methods in applied mechanics and engineering 196 (1-3), 304-320, 2006

  • Structural analysis of Küçük Ayasofya Mosque in Ístanbul

    M Massanas, P Roca, M Cervera, G Arun

    Structural Analysis of Historical Constructions IV, Padova, Italy, 2004

  • On the orthogonal subgrid scale pressure stabilization of small and finite deformation J2 plasticity

    CA de Saracibar, M Chiumenti, Q Valverde, M Cervera

    Monograph Series on Computational Methods in Forming Processes 2, 2004

  • Softening, localization and stabilization: capture of discontinuous solutions in J2 plasticity

    M Cervera, M Chiumenti, C Agelet de Saracibar

    International Journal for Numerical and Analytical Methods in Geomechanics …, 2004

  • Shear band localization via local J2 continuum damage mechanics

    M Cervera, M Chiumenti, C Agelet de Saracibar

    Computer methods in applied mechanics and engineering 193 (9), 849-880, 2004

  • Modeling material failure in concrete structures under cyclic actions

    R Faria, J Oliver, M Cervera

    Journal of Structural Engineering 130 (12), 1997-2005, 2004

  • El método de los elementos finitos

    OC Zienkiewicz, RL Taylor, trad., G Bugeda, M Cervera, E Oñate

    CIMNE, 2004

  • A stabilized formulation for incompressible plasticity using linear triangles and tetrahedra

    M Chiumenti, Q Valverde, CA de Saracibar, M Cervera

    International Journal of Plasticity 20 (8-9), 1487-1504, 2004

  • A Mixed Finite Element Formulation for Incompressibility Using Linear Displacement and Presure Interpolations

    D Christ, M Cervera, M Chiumenti, CA de Saracibar

    International Center for Numerical Methods in Engineering, 2003

  • Viscoelasticity and rate-dependent continuum damage models

    M Cervera

    CIMNE, Monography Nº-79, Technical University of Catalunya, Barcelona, Spain, 2003

  • Mixed linear/linear simplicial elements for incompressible elasticity and plasticity

    M Cervera, M Chiumenti, Q Valverde, CA de Saracibar

    Computer Methods in Applied Mechanics and Engineering 192 (49-50), 5249-5263, 2003

  • Una formulación estabilizada para plasticidad incompresible usando triangulos y tetraedros con interpolaciones lineales en desplazamientos y presiones

    M Chiumenti, Q Valverde, C Agelet de Saracibar, M Cervera

    Métodos Numéricos en Ingeniería V 94 (99), 100, 2002

  • Elementos estabilizados de bajo orden en mecánica de sólidos

    QM Valverde Guzmán

    Universitat Politècnica de Catalunya, 2002

  • COMET: COupled MEchanical and Thermal analysis-Data Input Manual Version 5.0

    M Cervera, C Agelet de Saracibar, M Chiumenti

    CIMNE, Technical report IT-308, 2002

  • Numerical modelling of concrete curing, regarding hydration and temperature phenomena

    M Cervera, R Faria, J Oliver, T Prato

    Computers & structures 80 (18-19), 1511-1521, 2002

  • A stabilized formulation for incompressible elasticity using linear displacement and pressure interpolations

    M Chiumenti, Q Valverde, CA De Saracibar, M Cervera

    Computer methods in applied mechanics and engineering 191 (46), 5253-5264, 2002

  • Simulación numérica del comportamiento termo-mecánico de presas de HCR Parte I: Modelización y calibración

    M Cervera, J Oliver, T Prato, J García

    Revista internacional de métodos numéricos para cálculo y diseño en …, 2001

  • On the constitutive modeling of coupled thermomechanical phase-change problems

    CA de Saracibar, M Cervera, M Chiumenti

    International Journal of Plasticity 17 (12), 1565-1622, 2001

  • Mecánica de estructuras

    M Cervera, E Blanco

    Edicions UPC, 2001

  • Simulation of construction of RCC dams. II: Stress and Damage

    M Cervera, J Oliver, T Prato

    Journal of structural Engineering 126 (9), 1062-1069, 2000

  • Simulation of construction of RCC dams. I: temperature and aging

    M Cervera, J Oliver, T Prato

    Journal of Structural Engineering 126 (9), 1053-1061, 2000

  • Localización de deformaciones: análisis y simulación numérica de discontinuidades en mecánica de sólidos

    OL Manzoli, J Oliver, M Cervera

    Centro Internacional de Métodos Numéricos en Ingeniería, 1999

  • Thermo-mechanical analysis of industrial solidification processes

    M Cervera, C Agelet De Saracibar, M Chiumenti

    International Journal for Numerical Methods in Engineering 46 (9), 1575-1591, 1999

  • Thermo-chemo-mechanical model for concrete. II: Damage and creep

    M Cervera, J Oliver, T Prato

    Journal of engineering mechanics 125 (9), 1028-1039, 1999

  • On the formulation of coupled thermoplastic problems with phase-change

    CA De Saracibar, M Cervera, M Chiumenti

    International journal of plasticity 15 (1), 1-34, 1999

  • Thermo-chemo-mechanical model for concrete. I: Hydration and aging

    M Cervera, J Oliver, T Prato

    Journal of engineering mechanics 125 (9), 1018-1027, 1999

  • Numerical prediction of temperature and density distributions in selective laser sintering processes

    G Bugeda, M Cervera, G Lombera

    Rapid Prototyping Journal 5 (1), 21-26, 1999

  • Strong discontinuities and continuum plasticity models: the strong discontinuity approach

    J Oliver, M Cervera, O Manzoli

    International journal of plasticity 15 (3), 319-351, 1999

  • Failure pressure evaluation of the containment building of a large dry nuclear power plant

    AH Barbat, M Cervera, A Hanganu, C Cirauqui, E Onate

    Nuclear engineering and design 180 (3), 251-270, 1998

  • On the use of strain-softening models for the simulation of strong discontinuities in solids

    J Oliver, M Cervera, O Manzoli

    Material Instabilities in Solids 8, 107-123, 1998

  • A strain-based plastic viscous-damage model for massive concrete structures

    R Faria, J Oliver, M Cervera

    International journal of solids and structures 35 (14), 1533-1558, 1998

  • Simulación numérica del proceso de hidratación del hormigón

    T Prato, M Cervera, X Oliver

    Centro Internacional de Métodos Numéricos en Ingeniería, 1997

  • Block-iterative algorithms for nonlinear coupled problems.

    M Cervera, R Codina

    CIMNE, 1996

  • On the computational efficiency and implementation of block-iterative algorithms for nonlinear coupled problems

    M Cervera, R Codina, M Galindo

    Engineering computations 13 (6), 4-30, 1996

  • A rate-dependent isotropic damage model for the seismic analysis of concrete dams

    M Cervera, J Oliver, O Manzoli

    Earthquake engineering & structural dynamics 25 (9), 987-1010, 1996

  • Evaluación de la presión de fallo del edificio de contención de una central nuclear tipo PWR-W tres lazos. Parte 1: Metodología

    M Cervera, ÁH Barbat, Á Hanganu, E Oñate, C Cirauqui

    Revista internacional de métodos numéricos para cálculo y diseño en …, 1995

  • Evaluación de la presión de fallo del edificio de contención de una central nuclear tipo PWR-W tres lazos. Parte II: Simulación numérica

    HA Barbat, M Cervera, C Cirauqui, Á Hanganu, E Oñate

    Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, 1995

  • Numerical analysis of stereolithography processes using the finite element method

    G Bugeda, M Cervera, G Lombera, E Onate

    Rapid Prototyping Journal 1 (2), 13-23, 1995

  • Seismic evaluation of concrete dams via continuum damage models

    M Cervera, J Oliver, R Faria

    Earthquake engineering & structural dynamics 24 (9), 1225-1245, 1995

  • A finite volume format for structural mechanics

    E Onate, M Cervera, OC Zienkiewicz

    International journal for numerical methods in engineering 37 (2), 181-201, 1994

  • A penalty finite element method for non‐Newtonian creeping flows

    R Codina, M Cervera, E Oñate

    International journal for numerical methods in engineering 36 (8), 1395-1412, 1993

  • Derivation of thin plate bending elements with one degree of freedom per node: a simple three node triangle

    E Oñate, M Cervera

    Engineering Computations 10 (6), 543-561, 1993

  • Efficient solution schemes for fluid-structure-soil interaction problems

    M Galindo, M Cervera, J Oliver

    Tenth World Conf. on Earthq. Eng, 4651-4656, 1992

  • A finite volume format for structural mechanics

    E Oñate, OC Zienkiewicz, M Cervera

    Centro Internacional de Métodos Numéricos en Ingeniería, 1992

  • The intrinsic time for the streamline upwind/Petrov-Galerkin formulation using quadratic elements

    R Codina, E Oñate, M Cervera

    Computer Methods in Applied Mechanics and Engineering 94 (2), 239-262, 1992

  • A computational model for progressive cracking in large dams due to the swelling of concrete

    M Cervera, J Oliver, E Herrero, E Onate

    Engineering Fracture Mechanics 35 (1), 573-585, 1990

  • Isotropic damage models and smeared crack analysis of concrete

    J Oliver, M Cervera, S Oller, J Lubliner

    II Int. conference on computer aided analysis and design of concrete …, 1990

  • Nonlinear Transient Dynamic Analysis of 3-D Structures-A Finite Element Program for steel and reinforced concrete materials

    M Cervera, E Hinton, J Bonet, N Bicanic

    Numerical Methods and Software For Dynamic Analysis Of Plates and Shells …, 1988

  • Nonlinear analysis of reinforced concrete plate and shell structures using 20-noded isoparametric brick elements

    M Cervera, E Hinton, O Hassan

    Computers & structures 25 (6), 845-869, 1987

  • Nonlinear analysis of reinforced concrete structures using three dimensional and shell finite element models.

    M Cervera

    University College of Swansea, 1986

Colleagues

Followers

Show more

contributions