Documents published in Scipedia

• Analytical approach for two-plane bending applied to unidirectional composite plates

  U. Garitaonaindia, N. Carbajal, M. Isasa, F. Mujika

  Materiales Compuestos (2024). Vol. 08 - COMUNICACIONES MATCOMP21 (2022) Y MATCOMP23 (2023), (Núm. 3 - Caracterización - Daño, Fractura y Fatiga), 2

  
  

  Abstract

  In this work, a new analytical procedure is developed to obtain the displacement field of a unidirectional composite plate subjected to bending in two planes. The analysed configuration consists of a plane plate supported at four points to which a point force is applied at the centre. The calculation procedure is based on the strain energy. The effects created by bending moments, torsional moments and shear forces in the plate have been considered. The results obtained analytically have been validated by comparing them with existing literature and with numerical simulations performed with the finite element software ABAQUS. High correlations have been obtained for the values corresponding to the vertical displacements in different alignments of points belonging to the plate, however, the same has not occurred with the distribution of moments.

  Abstract
  In this work, a new analytical procedure is developed to obtain the displacement field of a unidirectional composite plate subjected to bending in two planes. The analysed [...]

  • 2
  •  read

• Two-plane bending test applied to unidirectional composite laminates

  U. Garitaonaindia, N. Carbajal, M. Isasa, F. Mujika

  Materiales Compuestos (2022). Vol. 07 - COMUNICACIONES MATCOMP21 (2022), (Núm. 2 - Aplicaciones Industriales - Caracterización), 178

  
  

  Abstract

  This paper analyses the two-plane bending test to characterise the behaviour of unidirectional composite laminates. This test consists of a flat plate supported at four points to which a point force is applied at the centre. Currently, this configuration is not mathematically solved for orthotropic materials. Initially, the displacements and bending moments produced in plates of isotropic material have been analysed by means of numerical simulation and analytical approach. The results obtained have been corroborated with other works published in the scientific literature. Subsequently, the numerical models and the analytical development have been applied to plates formed with orthotropic material, in the configuration of the two-plane bending test. For this purpose, rectangular plates with different aspect ratio have been analysed in order to obtain different stress ratios along the fibre and perpendicular to it. Finally, the results obtained both by numerical simulation and by the analytical approach have been compared with experimental tests carried out on unidirectional composite specimens made of epoxy matrix and carbon fibre.

  Abstract
  This paper analyses the two-plane bending test to characterise the behaviour of unidirectional composite laminates. This test consists of a flat plate supported at four points [...]

  • 6
  •  read