(Created page with "==1 Title, abstract and keywords== Your document should start with a concise and informative title. Titles are often used in information-retrieval systems. Avoid abbreviation...") |
|||
| Line 1: | Line 1: | ||
| − | == | + | ==Abstract== |
| − | + | Cementitious materials such as mortar or concrete are brittle and have an inherent weakness in resisting tensile stresses. The addition of discontinuous fibers to such matrices leads to a | |
| + | dramatic improvement in their toughness and remedies their deficiencies. It is generally | ||
| + | agreed that the fibers contribute primarily to the post-cracking response of the composite by | ||
| + | bridging the cracks and providing resistance to crack opening (Suwaka & Fukuyama 2006). | ||
| − | + | On the other hand, the multifield theory is a mathematical tool able to describe materials | |
| + | which contain a complex substructure (Mariano & Stazi 2005). This substructure is endowed | ||
| + | with its own properties and it interacts with the macrostructure and influences drastically its | ||
| + | behavior. Under this mathematical framework, materials such as cement composites can be | ||
| + | seen as a continuum with a microstructure. Therefore, the whole continuum damage mechanics | ||
| + | theory, incorporating a new microstructure, is still applicable. | ||
| − | + | A formulation, initially based on the theory of continua with microstructure Capriz | |
| + | (Capriz 1989), has been developed to model the mechanical behavior of the high performance | ||
| + | fiber cement composites with arbitrarily oriented fibers. This formulation approaches | ||
| + | a continuum with microstructure, in which the microstructure takes into account the fibermatrix | ||
| + | interface bond/slip processes, which have been recognized for several authors (Li | ||
| + | 2003, Naaman 2007b) as the principal mechanism increasing the ductility of the quasi-brittle | ||
| + | cement response. In fact, the interfaces between the fiber and the matrix become a limiting | ||
| + | factor in improving mechanical properties such as the tensile strength. Particularly, in short | ||
| + | fiber composites is desired to have a strong interface to transfer effectively load from the | ||
| + | matrix to the fiber. However, a strong interface will make difficult to relieve fiber stress | ||
| + | concentration in front of the approaching crack. According to Naaman (Naaman 2003), in | ||
| + | order to develop a better mechanical bond between the fiber and the matrix, the fiber should | ||
| + | be modified along its length by roughening its surface or by inducing mechanical deformations. | ||
| + | Thus, the premise of the model is to take into account this process considering a microfield that represents the slipping fiber-cement displacement. The conjugate generalized stress | ||
| + | to the gradient of this micro-field verifies a balance equation and has a physical meaning. | ||
| − | + | This contribution includes the computational modeling aspects of the high fiber reinforced | |
| + | cement composites (HFRCC) model. To simulate the composite material, a finite | ||
| + | element discretization is used to solve the set of equations given by the multifield approach | ||
| + | for this particular case. A two field discretization: the standard macroscopic and the microscopic | ||
| + | displacements, is proposed through a mixed finite element methodology. Furthermore, | ||
| + | a splitting procedure for uncoupling both fields is proposed, which provides a more convenient | ||
| + | numerical treatment of the discrete equation system. | ||
| − | + | The initiation of failure in HPFRCC at the constitutive level identified as the onset of | |
| + | strain localization depends on the mechanical properties of the all compounds and not only | ||
| + | on the matrix ones. As localization criteria is considered the bifurcation analysis in combination | ||
| + | with the localized strain injection technique presented by Oliver et al. (Oliver et al. | ||
| + | 2010a). It consists of injecting a specific localization mode during the localization stage, via | ||
| + | mixed finite element formulations, to the path of elements that are going to capture the | ||
| + | cracks, and, in this way, the spurious mesh orientation dependence is removed. | ||
| − | + | Model validation was performed using a selected set of experiments that proves the viability | |
| + | of this approach. The numerical examples of the proposed formulation illustrated two | ||
| + | relevant aspects, namely: 1) the role of the bonding mechanism in the strain hardening behavior | ||
| + | after cracking in the HPFRCC and 2) the role that plays the finite element formulation in | ||
| + | capturing the displacement localization in the localization stage. | ||
| − | + | [[Media:Draft_Samper_397495699_4385_M139.pdf|M139.pdf]] | |
| − | + | ==References== | |
| − | + | See pdf document | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
Revision as of 16:30, 17 October 2017
Abstract
Cementitious materials such as mortar or concrete are brittle and have an inherent weakness in resisting tensile stresses. The addition of discontinuous fibers to such matrices leads to a dramatic improvement in their toughness and remedies their deficiencies. It is generally agreed that the fibers contribute primarily to the post-cracking response of the composite by bridging the cracks and providing resistance to crack opening (Suwaka & Fukuyama 2006).
On the other hand, the multifield theory is a mathematical tool able to describe materials which contain a complex substructure (Mariano & Stazi 2005). This substructure is endowed with its own properties and it interacts with the macrostructure and influences drastically its behavior. Under this mathematical framework, materials such as cement composites can be seen as a continuum with a microstructure. Therefore, the whole continuum damage mechanics theory, incorporating a new microstructure, is still applicable.
A formulation, initially based on the theory of continua with microstructure Capriz (Capriz 1989), has been developed to model the mechanical behavior of the high performance fiber cement composites with arbitrarily oriented fibers. This formulation approaches a continuum with microstructure, in which the microstructure takes into account the fibermatrix interface bond/slip processes, which have been recognized for several authors (Li 2003, Naaman 2007b) as the principal mechanism increasing the ductility of the quasi-brittle cement response. In fact, the interfaces between the fiber and the matrix become a limiting factor in improving mechanical properties such as the tensile strength. Particularly, in short fiber composites is desired to have a strong interface to transfer effectively load from the matrix to the fiber. However, a strong interface will make difficult to relieve fiber stress concentration in front of the approaching crack. According to Naaman (Naaman 2003), in order to develop a better mechanical bond between the fiber and the matrix, the fiber should be modified along its length by roughening its surface or by inducing mechanical deformations. Thus, the premise of the model is to take into account this process considering a microfield that represents the slipping fiber-cement displacement. The conjugate generalized stress to the gradient of this micro-field verifies a balance equation and has a physical meaning.
This contribution includes the computational modeling aspects of the high fiber reinforced cement composites (HFRCC) model. To simulate the composite material, a finite element discretization is used to solve the set of equations given by the multifield approach for this particular case. A two field discretization: the standard macroscopic and the microscopic displacements, is proposed through a mixed finite element methodology. Furthermore, a splitting procedure for uncoupling both fields is proposed, which provides a more convenient numerical treatment of the discrete equation system.
The initiation of failure in HPFRCC at the constitutive level identified as the onset of strain localization depends on the mechanical properties of the all compounds and not only on the matrix ones. As localization criteria is considered the bifurcation analysis in combination with the localized strain injection technique presented by Oliver et al. (Oliver et al. 2010a). It consists of injecting a specific localization mode during the localization stage, via mixed finite element formulations, to the path of elements that are going to capture the cracks, and, in this way, the spurious mesh orientation dependence is removed.
Model validation was performed using a selected set of experiments that proves the viability of this approach. The numerical examples of the proposed formulation illustrated two relevant aspects, namely: 1) the role of the bonding mechanism in the strain hardening behavior after cracking in the HPFRCC and 2) the role that plays the finite element formulation in capturing the displacement localization in the localization stage.
References
See pdf document
Document information
Published on 01/01/2013
Licence: CC BY-NC-SA license
Share this document
claim authorship
Are you one of the authors of this document?