Abstract

Validation and/or calibration of distinct element method (DEM) models is usually performed by comparing element test simulation results with the corresponding stress-strain relationships observed in the laboratory [1]. However, such a validation procedure performed at the macroscopic level does not ensure capturing the microscopic particle-level motion [2]. Thus, the reliability of the DEM model may be limited to some stress paths and may not hold when the material response becomes non-uniform for example when shear bands develop. In this study, the validity of the DEM is assessed by comparing the numerical result with experimental data considering both particle-scale behavior (including particle rotations) and macroscopic stress-strain characteristics observed in shearing tests on granular media. Biaxial shearing tests were conducted on bi-disperse granular assemblies composed of around 2700 circular particles under different confining pressures. Particle-level motions were detected by a novel image analysis technique. Particle rotations are observed to be a key mechanism for the deformation of granular materials. The results from this study suggest that to properly calibrate DEM models able to capture the mechanical behavior in a more realistic way particle scale motions observed in laboratory experiments along with macroscopic response are necessary.


The PDF file did not load properly or your web browser does not support viewing PDF files. Download directly to your device: Download PDF document

Full Paper

The PDF file did not load properly or your web browser does not support viewing PDF files. Download directly to your device: Download PDF document
Back to Top
GET PDF

Document information

Published on 06/07/22
Submitted on 06/07/22

Volume 1600 Geomechanics and Natural Materials, 2022
DOI: 10.23967/wccm-apcom.2022.127
Licence: CC BY-NC-SA license

Document Score

0

Views 44
Recommendations 0

Share this document

claim authorship

Are you one of the authors of this document?