Abstract

In this study, we investigated the influence of ground surface boundary conditions of the meteorological model on the accuracy in predicting the mean wind speed and wind speed fluctuation in the urban area. Two types of ground surface boundary conditions (Cases 1 and 2) were created. In Case 1, the roughness length for the urban area was set to 0.5 m uniformly, whereas in Case 2, the spatial distribution of roughness length for the urban area was set based on the urban geometry. We performed the wind flow simulation in the central part of Tokyo during Typhoon Lan (2017) by using WRF-LES with the created ground surface boundary conditions. By setting the roughness length based on the urban geometry, the accuracy in predicting the mean wind speed was improved significantly. However, in both cases, WRF-LES


The PDF file did not load properly or your web browser does not support viewing PDF files. Download directly to your device: Download PDF document

Document

The PDF file did not load properly or your web browser does not support viewing PDF files. Download directly to your device: Download PDF document
Back to Top
GET PDF

Document information

Published on 05/07/22
Submitted on 05/07/22

Volume 1200 Modeling and Analysis of Real World and Industry Applications, 2022
DOI: 10.23967/wccm-apcom.2022.130
Licence: CC BY-NC-SA license

Document Score

0

Views 16
Recommendations 0

Share this document

claim authorship

Are you one of the authors of this document?