(Created page with "==1 Title, abstract and keywords<!-- Your document should start with a concise and informative title. Titles are often used in information-retrieval systems. Avoid abbreviatio...") |
(No difference)
|
Revision as of 12:43, 7 January 2019
1 Title, abstract and keywords
2 The main text
3 Bibliography
4 Acknowledgments
5 References
Back to Top
Document information
Published on 01/01/2008
DOI: 10.1108/02644400810874976
Licence: CC BY-NC-SA license
Web of Science Core Collection® Times cited: 58
Crossref Cited-by Times cited: 66
OpenCitations.net Times cited: 46
OpenCitations.net - Citing documents:
- M. Mier-Torrecilla, A. Geyer, J. Phillips, S. Idelsohn, E. Oñate. Numerical simulations of negatively buoyant jets in an immiscible fluid using the Particle Finite Element Method. Int. J. Numer. Meth. Fluids 69(5) (2011) DOI 10.1002/fld.2628
- R. Rossi, A. Larese, P. Dadvand, E. Oñate. An efficient edge-based level set finite element method for free surface flow problems. Int. J. Numer. Meth. Fluids 71(6) (2012) DOI 10.1002/fld.3680
- E. Oñate, A. Franci, J. Carbonell. Lagrangian formulation for finite element analysis of quasi-incompressible fluids with reduced mass losses. Int. J. Numer. Meth. Fluids 74(10) (2014) DOI 10.1002/fld.3870
- S. Idelsohn, J. Marti, P. Becker, E. Oñate. Analysis of multifluid flows with large time steps using the particle finite element method. Int. J. Numer. Meth. Fluids 75(9) (2014) DOI 10.1002/fld.3908
- V. Nguyen, W. Park. A free surface flow solver for complex three-dimensional water impact problems based on the VOF method. Int. J. Numer. Meth. Fluids 82(1) (2015) DOI 10.1002/fld.4203
- L. Sun, G. Zhao, J. Zhao. Particle manifold method (PMM): A new continuum-discontinuum numerical model for geomechanics. Int. J. Numer. Anal. Meth. Geomech. 37(12) (2012) DOI 10.1002/nag.2104
- F. Salazar, J. Irazábal, A. Larese, E. Oñate. Numerical modelling of landslide-generated waves with the particle finite element method (PFEM) and a non-Newtonian flow model. Int. J. Numer. Anal. Meth. Geomech. 40(6) (2015) DOI 10.1002/nag.2428
- A. Franci, E. Oñate, J. Carbonell. On the effect of the bulk tangent matrix in partitioned solution schemes for nearly incompressible fluids. Int. J. Numer. Meth. Engng 102(3-4) (2014) DOI 10.1002/nme.4839
- F. Caballero, F. Salazar, J. Mauro, M. Toledo. Physical and numerical modeling for understanding the hydraulic behaviour of Wedge-Shaped-Blocks spillways. (2015) DOI 10.1201/b18292-22
- J. Garcia-Espinosa, A. Valls, E. Oñate. ODDLS: A new unstructured mesh finite element method for the analysis of free surface flow problems. Int. J. Numer. Meth. Engng 76(9) DOI 10.1002/nme.2348
- M. Cremonesi, A. Frangi, U. Perego. A Lagrangian finite element approach for the analysis of fluid-structure interaction problems. Int. J. Numer. Meth. Engng. (2010) DOI 10.1002/nme.2911
- F. Mossaiby, R. Rossi, P. Dadvand, S. Idelsohn. OpenCL-based implementation of an unstructured edge-based finite element convection-diffusion solver on graphics hardware. Int. J. Numer. Meth. Engng 89(13) (2011) DOI 10.1002/nme.3302
- C. Koh, M. Gao, C. Luo. A new particle method for simulation of incompressible free surface flow problems. Int. J. Numer. Meth. Engng 89(12) (2011) DOI 10.1002/nme.3303
- S. Rodolfo Idelsohn, N. Marcelo Nigro, J. Marcelo Gimenez, R. Rossi, J. Marcelo Marti. A fast and accurate method to solve the incompressible Navier‐Stokes equations. Engineering Computations 30(2) DOI 10.1108/02644401311304854
- F. Salazar, E. Oñate, R. Morán. Modelación numérica de deslizamientos de ladera en embalses mediante el Método de Partículas y Elementos Finitos (PFEM). Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería 28(2) DOI 10.1016/j.rimni.2012.03.004
- D. Pozo, F. Salazar, M. Toledo. Modelación del funcionamiento hidráulico de los dispositivos de aireación de desagües de fondo de presas mediante el método de partículas y elementos finitos. Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería 30(1) DOI 10.1016/j.rimni.2012.11.002
- A. Larese. A Lagrangian PFEM approach for non-Newtonian viscoplastic materials. Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería 33(3-4) DOI 10.1016/j.rimni.2016.07.002
- A. Larese, R. Rossi, E. Oñate, M. Toledo, R. Morán, H. Campos. Numerical and Experimental Study of Overtopping and Failure of Rockfill Dams. Int. J. Geomech. 15(4) DOI 10.1061/(asce)gm.1943-5622.0000345
- E. Oñate, S. Idelsohn, M. Celigueta, B. Suárez. The Particle Finite Element Method (PFEM). An Effective Numerical Technique for Solving Marine, Naval and Harbour Engineering Problems. DOI 10.1007/978-94-007-6143-8_4
- F. Salazar, E. Oñate, R. Morán. Numerical modeling of landslides in reservoirs using the Particle Finite Element Method (PFEM). (2012) DOI 10.1201/b11588-39
- I. Iaconeta, A. Larese, R. Rossi, Z. Guo. Comparison of a Material Point Method and a Galerkin Meshfree Method for the Simulation of Cohesive-Frictional Materials. Materials 10(10) (2017) DOI 10.3390/ma10101150
- A. Franci. Introduction. (2016) DOI 10.1007/978-3-319-45662-1_1
- A. Franci. Unified Stabilized Formulation for Quasi-incompressible Materials. (2016) DOI 10.1007/978-3-319-45662-1_3
- E. Oñate, S. Idelsohn, M. Celigueta, R. Rossi, S. Latorre. Possibilities of the Particle Finite Element Method in Computational Mechanics. DOI 10.1007/978-3-642-05241-5_15
- E. Oñate, S. Idelsohn, M. Celigueta, R. Rossi, J. Marti, J. Carbonell, P. Ryzhakov, B. Suárez. Advances in the Particle Finite Element Method (PFEM) for Solving Coupled Problems in Engineering. (2011) DOI 10.1007/978-94-007-0735-1_1
- S. Idelsohn, M. Mier-Torrecilla, J. Marti, E. Oñate. The Particle Finite Element Method for Multi-Fluid Flows. (2011) DOI 10.1007/978-94-007-0735-1_5
- J. Gimenez, N. Nigro, S. Idelsohn. Evaluating the performance of the particle finite element method in parallel architectures. Comp. Part. Mech. 1(1) (2014) DOI 10.1007/s40571-014-0009-4
- E. Oñate, M. Celigueta, S. Latorre, G. Casas, R. Rossi, J. Rojek. Lagrangian analysis of multiscale particulate flows with the particle finite element method. Comp. Part. Mech. 1(1) (2014) DOI 10.1007/s40571-014-0012-9
- F. Salazar, J. San-Mauro, M. Celigueta, E. Oñate. Air demand estimation in bottom outlets with the particle finite element method. Comp. Part. Mech. 4(3) (2016) DOI 10.1007/s40571-016-0117-4
- A. Franci, M. Cremonesi. On the effect of standard PFEM remeshing on volume conservation in free-surface fluid flow problems. Comp. Part. Mech. 4(3) (2016) DOI 10.1007/s40571-016-0124-5
- A. Franci, I. de-Pouplana, G. Casas, M. Celigueta, J. González-Usúa, E. Oñate. PFEM–DEM for particle-laden flows with free surface. Comp. Part. Mech. 7(1) (2019) DOI 10.1007/s40571-019-00244-1
- M. Cremonesi, S. Meduri, U. Perego. Lagrangian–Eulerian enforcement of non-homogeneous boundary conditions in the Particle Finite Element Method. Comp. Part. Mech. 7(1) (2019) DOI 10.1007/s40571-019-00245-0
- F. Salazar, J. San-Mauro, M. Celigueta, E. Oñate. Shockwaves in spillways with the particle finite element method. Comp. Part. Mech. 7(1) (2019) DOI 10.1007/s40571-019-00252-1
- A. Ghasemi, R. Nikbakhti, A. Ghasemi, F. Hedayati, A. Malvandi. Parallelized numerical modeling of the interaction of a solid object with immiscible incompressible two-phase fluid flow. Engineering Computations 34(3) DOI 10.1108/ec-01-2016-0016
- Y. Xiao, Z. Wang, J. Zeng, j. Zheng, J. Lin, L. Zhang. Prototype and numerical studies of interference characteristics of two ski-jump jets from opening spillway gates. Engineering Computations 32(2) DOI 10.1108/ec-04-2013-0104
- J. Gimenez, P. Morin, N. Nigro, S. Idelsohn. Numerical Comparison of the Particle Finite Element Method Against an Eulerian Formulation. (2016) DOI 10.1007/978-3-319-40827-9_2
- E. Oñate, A. Franci, J. Carbonell. A Particle Finite Element Method (PFEM) for Coupled Thermal Analysis of Quasi and Fully Incompressible Flows and Fluid-Structure Interaction Problems. (2014) DOI 10.1007/978-3-319-06136-8_6
- F. Salazar, R. Morán, R. Rossi, E. Oñate. Analysis of the discharge capacity of radial-gated spillways using CFD and ANN – Oliana Dam case study. Journal of Hydraulic Research 51(3) (2013) DOI 10.1080/00221686.2012.755714
- P. Dadvand, R. Rossi, E. Oñate. An Object-oriented Environment for Developing Finite Element Codes for Multi-disciplinary Applications. Arch Computat Methods Eng 17(3) (2010) DOI 10.1007/s11831-010-9045-2
- S. Idelsohn, J. Marti, A. Souto-Iglesias, E. Oñate. Interaction between an elastic structure and free-surface flows: experimental versus numerical comparisons using the PFEM. Comput Mech 43(1) (2008) DOI 10.1007/s00466-008-0245-7
- E. Lins, R. Elias, F. Rochinha, A. Coutinho. Residual-based variational multiscale simulation of free surface flows. Comput Mech 46(4) (2010) DOI 10.1007/s00466-010-0495-z
- P. Ryzhakov, R. Rossi, S. Idelsohn, E. Oñate. A monolithic Lagrangian approach for fluid–structure interaction problems. Comput Mech 46(6) (2010) DOI 10.1007/s00466-010-0522-0
- E. Oñate, M. Celigueta, S. Idelsohn, F. Salazar, B. Suárez. Possibilities of the particle finite element method for fluid–soil–structure interaction problems. Comput Mech 48(3) (2011) DOI 10.1007/s00466-011-0617-2
- A. Larese, R. Rossi, E. Oñate, S. Idelsohn. A coupled PFEM–Eulerian approach for the solution of porous FSI problems. Comput Mech 50(6) (2012) DOI 10.1007/s00466-012-0768-9
- E. Oñate, A. Franci, J. Carbonell. A particle finite element method for analysis of industrial forming processes. Comput Mech 54(1) (2014) DOI 10.1007/s00466-014-1016-2
