(Created page with "== Abstract == The “edge effect” problem in laminates is a redundant topic in the literature since the seventies because of its influence on the reduction of the laminate...") |
m (Scipediacontent moved page Draft Content 661082074 to AGUAYO et al 2021a) |
(No difference)
| |
Revision as of 21:25, 31 March 2022
Abstract
The “edge effect” problem in laminates is a redundant topic in the literature since the seventies because of its influence on the reduction of the laminate strength. In previous works analytic solutions for angle-ply and quasi-isotropic symmetric laminates were obtained. In this work, a new model for obtaining solutions in the general case of symmetric laminates is presented. It is based on a new assumed displacement field in which the transverse bending of the laminate is not constrained. An strategy for solving the system of differential equations is proposed, as well as different hypotheses for the boundary conditions. Different solutions for the interlaminar stresses can be derived from the proposed technique.
Full document
Document information
Published on 15/04/21
Accepted on 04/07/19
Submitted on 28/05/19
Volume 05 - Comunicaciones Matcomp19 (2021), Issue Núm. 2 - Caracterización analítica, numérica y experimental de los materiales compuestos. Materiales multifuncionales. Comportamiento de componentes estructurales., 2021
DOI: 10.23967/r.matcomp.2021.04.002
Licence: Other
Share this document
Keywords
claim authorship
Are you one of the authors of this document?