Summary

In this paper a multi-stage numerical analysis is presented with the aim to investigate effects of forming on the high-cycle fatigue performance of a deep-drawn aluminum sheet structure for use in a floating photovoltaic system. Forming simulations of a subsection of the full geometry are performed in a realistic two-step drawing-springback cycle. A simplified global analysis of service load response is performed to obtain displacements at the submodel boundary, that are used to generate boundary conditions for a local service load analysis. The local analysis is then performed on three different models of the subsection: (I) excluding forming effects, (II) including effects of thinning, and (III) including effects of thinning and residual stresses. The critical location with respect to the fatigue limit criterion in the Ottosen-Stenström-Ristinmaa high-cycle fatigue model was identified for case (I), and this location was used to compare the different models to assess effects of forming on high-cycle fatigue performance. Furthermore, the dynamic friction coefficient , and the isotropickinematic mixing coefficient were varied in order to investigate their respective effects.

Abstract

The PDF file did not load properly or your web browser does not support viewing PDF files. Download directly to your device: Download PDF document

Full Paper

The PDF file did not load properly or your web browser does not support viewing PDF files. Download directly to your device: Download PDF document
Back to Top
GET PDF

Document information

Published on 24/11/22
Accepted on 24/11/22
Submitted on 24/11/22

Volume Computational Solid Mechanics, 2022
DOI: 10.23967/eccomas.2022.127
Licence: CC BY-NC-SA license

Document Score

0

Views 85
Recommendations 0

Share this document

claim authorship

Are you one of the authors of this document?