You do not have permission to edit this page, for the following reason:
You are not allowed to execute the action you have requested.
You can view and copy the source of this page.
x
1
Published in ''Comput. Methods Appl. Mech. Engrg.'', Vol. 182 (3-4), pp. 355-370, 2000<br />2
doi: 10.1016/S0045-7825(99)00198-X3
4
5
==Abstract==6
7
A stabilized finite element formulation for incompressible viscous flows is derived. The starting point are the modified Navier-Stokes equations incorporating naturally the necessary stabilization terms via a finite increment calculus (FIC) procedure. Application of the standard finite element Galerkin method to the modified differential equations leads to a stabilized discrete system of equations overcoming the numerical instabilities emanating from the advective terms and those due to the lack of compatibility between approximate velocity and pressure fields. The FIC method also provides a natural explanation for the stabilization terms appearing in all equations for both the Navier-Stokes and the simpler Stokes equations. Transient solution schemes with enhanced stabilization properties are also proposed. Finally a procedure for computing the stabilization parameters is presented.8
9
<pdf>Media:Draft_Samper_444733316_5829_1-s2.0-S004578259900198X-main.pdf</pdf>10
Return to Onate 2000a.
Back to Top
Document information
Published on 01/01/2000
DOI: 10.1016/S0045-7825(99)00198-X
Licence: CC BY-NC-SA license
Web of Science Core Collection® Times cited: 111
Crossref Cited-by Times cited: 114
OpenCitations.net Times cited: 60
OpenCitations.net - Citing documents:
- E. Oñate, A. Valls, J. García. Computation of turbulent flows using a finite calculus–finite element formulation. Int. J. Numer. Meth. Fluids 54(6-8) (2007) DOI 10.1002/fld.1476
- Y. Bao, D. Zhou, Y. Zhao. A two-step Taylor-characteristic-based Galerkin method for incompressible flows and its application to flow over triangular cylinder with different incidence angles. Int. J. Numer. Meth. Fluids DOI 10.1002/fld.2054
- E. Oñate, P. Nadukandi, S. Idelsohn, J. García, C. Felippa. A family of residual-based stabilized finite element methods for Stokes flows. Int. J. Numer. Meth. Fluids 65(1-3) (2010) DOI 10.1002/fld.2468
- P. Ryzhakov, R. Rossi, E. Oñate. An algorithm for the simulation of thermally coupled low speed flow problems. Int. J. Numer. Meth. Fluids 70(1) (2011) DOI 10.1002/fld.2674
- E. Oñate, A. Franci, J. Carbonell. Lagrangian formulation for finite element analysis of quasi-incompressible fluids with reduced mass losses. Int. J. Numer. Meth. Fluids 74(10) (2014) DOI 10.1002/fld.3870
- M. Kouhi, E. Oñate. A stabilized finite element formulation for high-speed inviscid compressible flows using finite calculus. Int. J. Numer. Meth. Fluids 74(12) (2014) DOI 10.1002/fld.3877
- P. Ryzhakov, J. Cotela, R. Rossi, E. Oñate. A two-step monolithic method for the efficient simulation of incompressible flows. Int. J. Numer. Meth. Fluids 74(12) (2014) DOI 10.1002/fld.3881
- S. Idelsohn, J. Marti, P. Becker, E. Oñate. Analysis of multifluid flows with large time steps using the particle finite element method. Int. J. Numer. Meth. Fluids 75(9) (2014) DOI 10.1002/fld.3908
- S. Liao, Y. Zhang, D. Chen. A Galerkin finite element algorithm based on third‐order Runge‐Kutta temporal discretization along the uniform streamline for unsteady incompressible flows. Int J Numer Meth Fluids 90(7) (2019) DOI 10.1002/fld.4722
- I. de-Pouplana, E. Oñate. A FIC-based stabilized mixed finite element method with equal order interpolation for solid-pore fluid interaction problems. Int. J. Numer. Anal. Meth. Geomech. 41(1) (2016) DOI 10.1002/nag.2550
- X. Li, X. Zhang, X. Han, D. Sheng. An iterative pressure-stabilized fractional step algorithm in saturated soil dynamics. Int. J. Numer. Anal. Meth. Geomech. DOI 10.1002/nag.829
- S. Idelsohn, E. Oñate, R. Rossi, J. Marti, F. Del Pin. New Computational Challenges in Fluid– Structure Interactions Problems. DOI 10.1007/978-1-4020-9231-2_2
- K. Nakshatrala, D. Turner. A Mixed Formulation for a Modification to Darcy Equation Based on Picard Linearization and Numerical Solutions to Large-Scale Realistic Problems. International Journal for Computational Methods in Engineering Science and Mechanics 14(6) (2013) DOI 10.1080/15502287.2013.822942
- E. OÑATE, S. IDELSOHN, F. DEL PIN, R. AUBRY. THE PARTICLE FINITE ELEMENT METHOD — AN OVERVIEW. Int. J. Comput. Methods 01(02) (2012) DOI 10.1142/s0219876204000204
- J. Marti, P. Ryzhakov, S. Idelsohn, E. Oñate. Combined Eulerian-PFEM approach for analysis of polymers in fire situations. Int. J. Numer. Meth. Engng 92(9) (2012) DOI 10.1002/nme.4357
- A. Franci, E. Oñate, J. Carbonell. On the effect of the bulk tangent matrix in partitioned solution schemes for nearly incompressible fluids. Int. J. Numer. Meth. Engng 102(3-4) (2014) DOI 10.1002/nme.4839
- X. Han, X. Li. A mixed finite element scheme for viscoelastic flows with XPP model. Acta Mech Sin 24(6) (2008) DOI 10.1007/s10409-008-0189-3
- W. Wang, X. Li, X. Han. Equal Low-Order Finite Element Simulation of the Planar Contraction Flow for Branched Polymer Melts. Polymer-Plastics Technology and Engineering 48(11) DOI 10.1080/03602550903147312
- J. Rojek, E. Oñate, R. Taylor. CBS-based stabilization in explicit solid dynamics. Int. J. Numer. Meth. Engng 66(10) DOI 10.1002/nme.1689
- P. Saksono, W. Dettmer, D. Perić. An adaptive remeshing strategy for flows with moving boundaries and fluid–structure interaction. Int. J. Numer. Meth. Engng 71(9) (2007) DOI 10.1002/nme.1971
- X. Li, Q. Duan, X. Han, D. Sheng. Adaptive coupled arbitrary Lagrangian–Eulerian finite element and meshfree method for injection molding process. Int. J. Numer. Meth. Engng 73(8) (2008) DOI 10.1002/nme.2117
- F. Ilinca, J. Hétu. A new stabilized finite element method for reaction-diffusion problems: The source-stabilized Petrov-Galerkin method. Int. J. Numer. Meth. Engng 75(13) DOI 10.1002/nme.2324
- J. Garcia-Espinosa, A. Valls, E. Oñate. ODDLS: A new unstructured mesh finite element method for the analysis of free surface flow problems. Int. J. Numer. Meth. Engng 76(9) DOI 10.1002/nme.2348
- E. Oñate, R. Rossi, S. Idelsohn, K. Butler. Melting and spread of polymers in fire with the particle finite element method. Int. J. Numer. Meth. Engng DOI 10.1002/nme.2731
- M. Cremonesi, A. Frangi, U. Perego. A Lagrangian finite element approach for the analysis of fluid-structure interaction problems. Int. J. Numer. Meth. Engng. (2010) DOI 10.1002/nme.2911
- E. Oñate, S. Idelsohn, C. Felippa. Consistent pressure Laplacian stabilization for incompressible continua via higher-order finite calculus. Int. J. Numer. Meth. Engng. 87(1-5) (2010) DOI 10.1002/nme.3021
- E. Oñate, M. Celigueta, S. Idelsohn. Modeling bed erosion in free surface flows by the particle finite element method. Acta Geotech. 1(4) (2006) DOI 10.1007/s11440-006-0019-3
- E. Oñate, J. García-Espinosa, S. Idelsohn, B. Serván-Camas. Ship Hydrodynamics. (2017) DOI 10.1002/9781119176817.ecm2070
- E. Oñate, R. Taylor, O. Zienkiewicz, J. Rojek. A residual correction method based on finite calculus. Engineering Computations 20(5/6) DOI 10.1108/02644400310488790
- A. Larese, R. Rossi, E. Oñate, S. Idelsohn. Validation of the particle finite element method (PFEM) for simulation of free surface flows. Engineering Computations 25(4) DOI 10.1108/02644400810874976
- J. Dai, H. Pinheiro, J. Webb, I. Tsukerman. Flexible approximation schemes with numerical and semi‐analytical bases. COMPEL 30(2) DOI 10.1108/03321641111101078
- W. Dettmer, P. Saksono, D. Perić. On a finite element formulation for incompressible Newtonian fluid flows on moving domains in the presence of surface tension. Commun. Numer. Meth. Engng. 19(9) (2003) DOI 10.1002/cnm.628
- A. Franci. Introduction. (2016) DOI 10.1007/978-3-319-45662-1_1
- A. Franci. Unified Stabilized Formulation for Quasi-incompressible Materials. (2016) DOI 10.1007/978-3-319-45662-1_3
- E. Oñate, S. Idelsohn, M. Celigueta, R. Rossi, S. Latorre. Possibilities of the Particle Finite Element Method in Computational Mechanics. DOI 10.1007/978-3-642-05241-5_15
- E. Oñate, S. Idelsohn, M. Celigueta, R. Rossi, J. Marti, J. Carbonell, P. Ryzhakov, B. Suárez. Advances in the Particle Finite Element Method (PFEM) for Solving Coupled Problems in Engineering. (2011) DOI 10.1007/978-94-007-0735-1_1
- E. Oñate, M. Celigueta, S. Latorre, G. Casas, R. Rossi, J. Rojek. Lagrangian analysis of multiscale particulate flows with the particle finite element method. Comp. Part. Mech. 1(1) (2014) DOI 10.1007/s40571-014-0012-9
- X. Li, X. Han, Q. Duan. Modelling of Non-Isothermal Non-Newtonian Viscoelastic Flows. DOI 10.1007/978-3-540-75999-7_11
- J. Garcı´a, E. On˜ate. An Unstructured Finite Element Solver for Ship Hydrodynamics Problems. 70(1) (2003) DOI 10.1115/1.1530631
- C. Varanasi, J. Murthy, S. Mathur. A Meshless Finite Difference Method for Conjugate Heat Conduction Problems. 132(8) (2010) DOI 10.1115/1.4001363
- S. Chen, Z. Zhang, J. Yan. The Patch Test of Numerical Manifold Schemes with Mixed Cover Coupled Velocity and Pressure for Steady N-S Equations. AMR 378-379 (2011) DOI 10.4028/www.scientific.net/amr.378-379.68
- V. Gravemeier. The variational multiscale method for laminar and turbulent flow. ARCO 13(2) DOI 10.1007/bf02980231
- E. Oñate, A. Franci, J. Carbonell. A Particle Finite Element Method (PFEM) for Coupled Thermal Analysis of Quasi and Fully Incompressible Flows and Fluid-Structure Interaction Problems. (2014) DOI 10.1007/978-3-319-06136-8_6
- E. Oñate, S. Idelsohn, F. Del Pin, R. Aubry. Possibilities of the particle finite element method for fluid-structure interaction problems with free surface waves. Revue Européenne des Éléments Finis 13(5-7) (2012) DOI 10.3166/reef.13.637-666
- W. Wang, X. Wang, C. Hu. A comparative study of viscoelastic planar contraction flow for polymer melts using molecular constitutive models. Korea-Aust. Rheol. J. 26(4) (2014) DOI 10.1007/s13367-014-0042-0
- P. Cuéllar, M. Baeβler, W. Rücker. Relevant Factors for the Liquefaction Susceptibility of Cyclically Loaded Offshore Monopiles in Sand. (2013) DOI 10.1061/9780784412992.160
- T. Oliveira, A. Sanchez-Arcilla, X. Gironella, O. Madsen. On the generation of regular long waves in numerical wave flumes based on the particle finite element method. Journal of Hydraulic Research 55(4) (2017) DOI 10.1080/00221686.2016.1275047
- W. Wang, C. Hu, W. Li. Time-dependent rheological behavior of branched polymer melts in extensional flows. Mech Time-Depend Mater 20(1) (2015) DOI 10.1007/s11043-015-9287-3
- T. Oliveira, A. Sánchez-Arcilla, X. Gironella. Simulation of Wave Overtopping of Maritime Structures in a Numerical Wave Flume. Journal of Applied Mathematics 2012 DOI 10.1155/2012/246146
- O. Eugenio. Finite increment calculus (FIC): a framework for deriving enhanced computational methods in mechanics. Adv. Model. and Simul. in Eng. Sci. 3(1) (2016) DOI 10.1186/s40323-016-0065-9
- W. Dettmer, D. Perić. A Fully Implicit Computational Strategy for Strongly Coupled Fluid–Solid Interaction. Arch Computat Methods Eng 14(3) (2007) DOI 10.1007/s11831-007-9006-6
- C. Felippa, E. Oñate. Nodally exact Ritz discretizations of 1D diffusion–absorption and Helmholtz equations by variational FIC and modified equation methods. Comput Mech 39(2) (2006) DOI 10.1007/s00466-005-0011-z
- E. Oñate, A. Valls, J. García. FIC/FEM Formulation with Matrix Stabilizing Terms for Incompressible Flows at Low and High Reynolds Numbers. Comput Mech 38(4-5) (2006) DOI 10.1007/s00466-006-0060-y
- S. Idelsohn, J. Marti, A. Souto-Iglesias, E. Oñate. Interaction between an elastic structure and free-surface flows: experimental versus numerical comparisons using the PFEM. Comput Mech 43(1) (2008) DOI 10.1007/s00466-008-0245-7
- A. Masud, R. Calderer. A variational multiscale stabilized formulation for the incompressible Navier–Stokes equations. Comput Mech 44(2) (2009) DOI 10.1007/s00466-008-0362-3
- S. Idelsohn, M. Mier-Torrecilla, N. Nigro, E. Oñate. On the analysis of heterogeneous fluids with jumps in the viscosity using a discontinuous pressure field. Comput Mech 46(1) (2009) DOI 10.1007/s00466-009-0448-6
- E. Oñate, A. Franci, J. Carbonell. A particle finite element method for analysis of industrial forming processes. Comput Mech 54(1) (2014) DOI 10.1007/s00466-014-1016-2
- E. Oñate, J. Carbonell. Updated lagrangian mixed finite element formulation for quasi and fully incompressible fluids. Comput Mech 54(6) (2014) DOI 10.1007/s00466-014-1078-1
- M. Kouhi, E. Oñate. An implicit stabilized finite element method for the compressible Navier–Stokes equations using finite calculus. Comput Mech 56(1) (2015) DOI 10.1007/s00466-015-1161-2
- I. Iaconeta, A. Larese, R. Rossi, E. Oñate. A stabilized mixed implicit Material Point Method for non-linear incompressible solid mechanics. Comput Mech 63(6) (2018) DOI 10.1007/s00466-018-1647-9