You do not have permission to edit this page, for the following reason:

You are not allowed to execute the action you have requested.


You can view and copy the source of this page.

x
 
1
<!-- metadata commented in wiki content
2
3
4
<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
5
'''Research on seismic performance of corrugated web steel structures'''</div>
6
7
<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
8
Cao Hui-min*<sup>1,2</sup>;Wang Guo-juan Han-jun<sup>2</sup>;Liu Hong-bing<sup>1</sup></div>
9
10
<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
11
(1. Northwestern Polytechnical University(China);2.Xi’an Traffic Engineering Institute(China)</div>
12
-->
13
14
'''Abstract: ''' Corrugated web H-beam refers to a steel beam with a wavy shape along its length, which is extensively utilized in various parts of building structures such as beams, columns, and walls. It serves the purpose of connection and support, while the corrugated or folded design enhances the shear resistance and out-of-plane stiffness of the web to some extent. However, despite their advantages including high strength, stiffness, and lightweight construction, relevant regulations stipulate that these members can only be used in lower-intensity applications or higher-intensity scenarios if specific conditions are met. One crucial condition is that the ratio between the design value of axial force subjected to seismic action and the product of the member's flange section area and steel's tensile strength should not exceed 0.4. In this study, we aim to further investigate the seismic characteristics and applicable intensity of corrugated steel structures under earthquakes through large-scale finite element ABAQUS simulations. We will observe dynamic characteristics and failure modes of corrugated rigid frame structures using elastic-plastic time-history analysis methods as well as examine plastic deformation features of steel beam members under low cyclic loads via hysteretic analysis methods. The findings demonstrate that when properly designed with reasonable beam spans, corrugated web rigid frame structures can still be employed in high-intensity areas above 7 degrees even when subjected to an axial compression ratio up to 0.5.
15
16
'''Keywords''': Corrugated web; Intensity; Hysteretic behavior; Axial pressure ratio
17
18
=1 Introduction=
19
20
The concept of green building is comprehensively implemented in project construction and building, integrating principles of environmental protection and energy conservation to achieve features of sustainable development. Furthermore, the advancement of assembled steel structures effectively promotes the progress of green building<span id='citeF-1'></span>[[#cite-1|[1]]]. 
21
22
Corrugated steel profiles represent a novel form of environmentally friendly construction steel that has emerged in recent decades. The availability of materials, on-site component cutting and assembly capabilities, waste-free production processes, reduced transportation costs, and the ability to select sections based on load requirements have facilitated ongoing research in this field<span id='citeF-1'></span>[[#cite-1|[2]]]. With the recent comprehensive investigations conducted by scientific researchers, static studies on corrugated steel profiles have reached a relatively advanced stage while dynamic research has been progressively expanding. In terms of bridge applications, Jiang Lizhong et al<span id='citeF-1'></span>[[#cite-1|[3]]] experimentally demonstrated that corrugated web steel-concrete composite box girders exhibit well-defined load-displacement hysteresis loops under low-cycle repeated loads without any noticeable pinching phenomenon, thereby displaying excellent seismic performance. According to the principle of equal shear capacity in box girder sections, Feng Wenzhang<span id='citeF-1'></span>[[#cite-1|[4]]] developed finite element models for both corrugated steel web continuous rigid frame bridges and corresponding concrete web continuous rigid frame bridges. A comparative analysis was conducted on the dynamic characteristics and seismic performance of these two types. The findings reveal that under earthquake loading, corrugated steel web rigid frame bridges exhibit reduced internal forces at low piers and top shears at high piers compared to concrete web rigid frame bridges; however, they experience increased top bending moment at high piers and bottom internal forces at piers. Through mechanical formula analysis, Li Pengfei et al<span id='citeF-1'></span>[[#cite-1|[5]]] have demonstrated that the implementation of hollow piers not only results in reduced weight but also effectively enhances the torsional performance of the upper structure in continuous rigid frame bridges with corrugated steel webs, thereby increasing its transverse compressive stiffness. Consequently, when designing continuous rigid frame box girder bridges with corrugated steel webs, employing hollow piers offers significant advantages. In terms of architecture, The seismic performance of the H-beam cantilever beam and frame with corrugated web was analyzed using the ABAQUS finite element model, as conducted by Wanyu<span id='citeF-1'></span>[[#cite-1|[6]]]. The seismic performance of corrugated web dampers has been enhanced through Peng Jiacheng’s<span id='citeF-1'></span>[[#cite-1|[7]]] experimental research, thereby expanding the potential applications of corrugated steel materials. Xingyu Mou et al<span id='citeF-1'></span>[[#cite-1|[8]]] proposed a novel composite shear wall configuration comprising a frame consisting of corrugated concrete-filled steel tubular columns and filled corrugated steel plates, and demonstrated the excellent seismic performance of this composite structure through numerical analysis and experimental investigations. According to the current investigation, despite the numerous advantages of corrugated web profiles, their promotion and utilization in China remain inadequate due to the intricate production process and limited seismic performance<span id='citeF-1'></span>[[#cite-1|[9,10]]]. Therefore, conducting research on corrugated steel within the realm of seismic applications for industrial and civil buildings holds immense significance<span id='citeF-1'></span>[[#cite-1|[11]]]. 
23
24
The simulation analysis in this study employed a combination of dynamic and quasi-static approaches. Time-history analysis was conducted on the rigid frame, while hysteresis analysis was performed on the steel beam[12]. These analyses were utilized to further investigate the ratio between the seismic-induced axial force design value and the product of the member's flange section area and its steel tensile strength design value. This research provides a theoretical basis for utilizing such components in high-intensity earthquake zones.
25
26
=2 Modeling and analytical hypotheses=
27
28
==2.1 Analytical model and its corresponding parameters==
29
30
The material parameters are presented in Table 1, as depicted in Figure 1. Additionally, the web fluctuation parameters utilized in this study can be found in Table 2 and Figure 2.
31
32
{| style="width: 85%;margin: 1em auto 0.1em auto;border-collapse: collapse;" 
33
|-
34
<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
35
<span style="text-align: center; font-size: 85%;">'''Table 1 Material Parameters'''</span></div>
36
|  style="border-top: 2pt solid black;border-bottom: 1pt solid black;text-align: center;"|<span style="text-align: center; font-size: 85%;">'''Steel '''</span>
37
|  style="border-top: 2pt solid black;border-bottom: 1pt solid black;text-align: center;"|<span style="text-align: center; font-size: 85%;">'''Ε'''</span>
38
|  style="border-top: 2pt solid black;border-bottom: 1pt solid black;text-align: center;"|<span style="text-align: center; font-size: 85%;">'''ρ'''</span>
39
|  style="border-top: 2pt solid black;border-bottom: 1pt solid black;text-align: center;"|<span style="text-align: center; font-size: 85%;">'''μ'''</span>
40
| style="border-top:2pt solid black;border-bottom: 1pt solid black;text-align: center;"|<span style="text-align: center; font-size: 85%;">'''ƒy'''</span>
41
|-
42
|  style="border-top: 1pt solid black;border-bottom: 2pt solid black;text-align: center;"|<span style="text-align: center; font-size: 85%;">Q345</span>
43
|  style="border-top: 1pt solid black;border-bottom: 2pt solid black;text-align: center;"|<span style="text-align: center; font-size: 75%;">2.06×10<sup>11</sup></span><span style="text-align: center; font-size: 85%;">N/m<sup>2</sup></span>
44
|  style="border-top: 1pt solid black;border-bottom: 2pt solid black;text-align: center;"|<span style="text-align: center; font-size: 85%;">7850kg/m<sup>3</sup></span>
45
|  style="border-top: 1pt solid black;border-bottom: 2pt solid black;text-align: center;"|<span style="text-align: center; font-size: 85%;">0.28</span>
46
|  style="border-top: 1pt solid black;border-bottom: 2pt solid black;text-align: center;"|<span style="text-align: center; font-size: 85%;">310N/mm<sup>2</sup></span>
47
|}
48
49
50
{| style="width: 80%;margin: 1em auto 0.1em auto;border-collapse: collapse;" 
51
|-
52
<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
53
<span style="text-align: center; font-size: 85%;">'''Table 2 Comparison of geometric parameters'''</span></div>
54
|  style="border-top: 2pt solid black;border-bottom: 1pt solid black;text-align: center;"|<span style="text-align: center; font-size: 85%;">'''Angle(°)'''</span>
55
|  style="border-top: 2pt solid black;border-bottom: 1pt solid black;text-align: center;"|<span style="text-align: center; font-size: 85%;">'''Wave length'''</span>
56
57
<span style="text-align: center; font-size: 85%;">'''(mm)'''</span>
58
|  style="border-top: 2pt solid black;border-bottom: 1pt solid black;text-align: center;"|<span style="text-align: center; font-size: 85%;">'''Wave height'''</span>
59
60
<span style="text-align: center; font-size: 85%;">'''(mm)'''</span>
61
|  style="border-top: 2pt solid black;border-bottom: 1pt solid black;text-align: center;"|<span style="text-align: center; font-size: 85%;">'''Flange thickness-to-width ratio'''</span>
62
|  style="border-top: 2pt solid black;border-bottom: 1pt solid black;text-align: center;"|<span style="text-align: center; font-size: 85%;">'''Thick-ness'''</span>
63
64
<span style="text-align: center; font-size: 85%;">'''(mm)'''</span>
65
|  style="border-top: 2pt solid black;border-bottom: 1pt solid black;text-align: center;"|<span style="text-align: center; font-size: 85%;">'''Web height'''</span>
66
67
<span style="text-align: center; font-size: 85%;">'''(mm)'''</span>
68
|-
69
|  style="border-top: 1pt solid black;border-bottom: 2pt solid black;text-align: center;"|<span style="text-align: center; font-size: center 30%;">45</span>
70
|  style="border-top: 1pt solid black;border-bottom: 2pt solid black;text-align: center;"|<span style="text-align: center; font-size:center 30%;">240</span>
71
|  style="border-top: 1pt solid black;border-bottom: 2pt solid black;text-align: center;"|<span style="text-align: center; font-size: center 30%;">25</span>
72
|  style="border-top: 1pt solid black;border-bottom: 2pt solid black;text-align: center;"|<span style="text-align: center; font-size: center 30%;">0.05</span>
73
|  style="border-top: 1pt solid black;border-bottom: 2pt solid black;text-align: center;"|<span style="text-align: center; font-size: center 30%;">2</span>
74
|  style="border-top: 1pt solid black;border-bottom: 2pt solid black;text-align: center;"|<span style="text-align: center; font-size:center 30%;">520</span>
75
|}
76
77
78
79
<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
80
''' [[Image:Review_737505923211-image1.png|430px]] '''</div>
81
<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
82
<span style="text-align: center;">'''Figure 1 Material constitutive model'''</span> </div>
83
84
85
<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
86
''' [[File:Review_737505923211_7586_Review_737505923211-image2.png|520px]] '''</div>
87
<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
88
<span style="text-align: center; ">'''Figure 2 Web plate bending parameters'''</span></div>
89
90
91
As depicted in Figure 3, Model 1 represents a rigid frame structure with zero ridge slope, featuring corrugated beam members of lengths 6m, 12m, 18m, and 24m, along with uniformly sized column heights of 6m.  The node serves as a rigid junction connecting the X-direction (column height), Y-direction (perpendicular to the beam axis), and Z-direction (span direction) of the rigid frame.  On the other hand, Model 2 exemplifies an ordinary rigid frame beam member model used for observing the hysteretic characteristics of corrugated steel beams under low-cycle reciprocating loads.
92
93
{| style="width: 100%;border-collapse: collapse;" 
94
|-
95
|  style="text-align: center;vertical-align: centre;width: 50%;"|[[Image:Review_737505923211-image3-c.png|center|310px]]
96
<span style="text-align: center; font-size: 85%;">(1)Rigid frame structure model</span>
97
|  style="text-align: center;vertical-align: centre;width: 50%;"|[[Image:Review_737505923211-image4.png|center|340px]]
98
<span style="text-align: center; font-size: 85%;">(2)Steel beam structure model</span>
99
|}
100
<div id="_GoBack" class="center" style="width: auto; margin-left: auto; margin-right: auto;">
101
<span style="text-align: center; ">'''Figure 3 Model diagram '''</span></div>
102
103
==2.2 Analytical assumptions==
104
105
(1)In the ideal state, it is assumed that the connection between the node of the member and the support in a rigid frame is perfectly rigid.
106
107
(2)The beam of a rigid frame structure is assumed to be supported solely by pressure-type steel plate roofs and cold-formed steel purlins.
108
109
(3)It is assumed that the structures are subjected to ideal conditions when under stress.
110
111
=3 The dynamic analysis of a rigid frame structure=
112
113
==3.1 Modal analysis==
114
115
Taking the rigid frame with a span of 12 meters as an example, the modal analysis of the structure is carried out, and each mode is shown in Figure 4.
116
117
{| style="width: 100%;" 
118
|-
119
|  style="text-align: center;vertical-align: top;width: 50%;"|
120
[[Image:Draft_Hui-min_632690981-image5.png|center|258px]]
121
First-order mode
122
|  style="vertical-align: top;"|<span style="text-align: center; font-size: 60%;">
123
[[Image:Draft_Hui-min_632690981-image6.png|center|252px]]
124
second-order mode        
125
|-
126
|  style="text-align: center;vertical-align: top;width: 50%;"|[[Image:Draft_Hui-min_632690981-image7.png|288px]]
127
128
Third-order mode
129
|  style="text-align: center;vertical-align: top;width: 50%;"|[[Image:Draft_Hui-min_632690981-image8.png|288px]]
130
131
<span style="text-align: center; font-size: 75%;">Fourth-order mode</span>
132
|}
133
<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
134
<span style="text-align: center;">'''Figure 4 Modal Analysis Diagram'''</span></div>
135
136
137
In this model, a subspace iterative method was employed to extract the first four modes, with the first frequency being 1.3058 Hz, corresponding to a period of 0.74 s for the model. The results obtained from both manual calculation and software using the formula '''ω='''<math> \sqrt{K/M}</math>showed little discrepancy, indicating that the structural model is accurate and reliable.
138
139
==3.2 Time-history analysis==
140
141
In the Time-history analysis, a pair of eccentric forces is applied to simulate the beam as a flexural member and control it at the required axial compression ratio. The formula used for calculating the axial compression ratio is given by  <math>n=N/(f\ast A_f)</math> , where <math>N</math> represents the axial pressure value,  <math>A_f</math> denotes the net cross-sectional area of the flange, and <math>f</math> represents the design value of steel's tensile strength.
142
143
===3.2.1 The modulation of seismic wave amplitude===
144
145
Under the column base constraint Ux, UR1, UR2, and UR3 are set to zero,Uy and Uz represent the translational degrees of freedom along the y-axis and z-axis respectively, while Ux representing the translational degree of freedom along the x-axis. Similarly, UR1, UR2 and UR3 represent the rotational degrees of freedom around the x-axis, y-axis, and z-axis respectively. The EL-Centro seismic waves are applied to Uy and  Uz . Amplitude modulation is performed using the formula <math>a_0(t_i)=\frac{a_{0,}{}_{max}}{a_m}a(t_i)</math>. where <math>a_{0,}{}_{max}</math> denotes the designed maximum acceleration; <math>a_m</math> represents the maximum acceleration from the selected seismic record; and <math>t_i</math> signifies an actual seismic acceleration time coordinate point with i=1, 2, 3... These points should be recorded.
146
147
Taking the ''EL-Centro'' wave as an example, it exhibits a peak acceleration of 2.20 m/s<sup>2</sup> [[#cite-1|[13]]] and is depicted in Figure 5.                                                     
148
149
{| style="width: 100%;" 
150
|-
151
|  style="text-align: center;"|<span style="text-align: center; font-size: 75%;">
152
[[Image:Review_737505923211-image13.png|center|306px]]
153
(a) Before the ''EL-Centro '' Amplitude Modulation</span>
154
|  style="text-align: center;"|<span style="text-align: center; font-size: 75%;">
155
[[Image:Review_737505923211-image14.png|center|306px]]
156
(b)''  ''After the ''EL-Centro '' Amplitude Modulation</span>
157
|}
158
<div id="_Toc502666992" class="center" style="width: auto; margin-left: auto; margin-right: auto;">
159
<span style="text-align: center;">'''Figure 5 The comparison of EL-Centro wave before and after amplitude modulation'''</span></div>
160
161
===3.2.2 The basis for analysis===
162
163
According to the Stipulate of the the ''Technical Specification for Steel Structures of Lightweight Buildings with Portal Frames(GB51022:2015)''<span id='citeF-1'></span>[[#cite-1|[12]]]3.3.1: In a single-layer portal frame configuration, excluding crane and light steel wallboard, the maximum displacement of the column's top should not exceed H/ 60. This implies that the angular displacement between layers must be less than 0.017.
164
165
According to the Stipulate of the the ''Technical Specification for Steel Structures of Lightweight Buildings with Portal Frames(GB51022:2015)''<span id='citeF-1'></span>[[#cite-1|[12]]]3.3.2: The deflection limit for members of inclined beams in portal frames, supporting only profiled steel roofs and cold-formed steel purlins, is L/180, where L represents the full-span length.
166
167
===3.2.3 The analysis of the results===
168
169
(1) Comparative analysis under seismic conditions at axial compression ratios of 0.4 and 0.5
170
171
The eccentric load is applied to the beam of the rigid frame structure, subjecting the member to a specified axial compression ratio, and seismic waves are applied during rare earthquakes at the base of the rigid frame column. Firstly, we compare and analyze the structural stress and failure under earthquake conditions with an axial compression ratio of 0.4 and 0.5.
172
173
According to the analysis in Section 3.2.2, it is evident that for beam spans of 6m and 12m as shown in Table 3, the inter-story displacement angle fails to meet the design requirements for seismic activity of a magnitude of nine degrees in high-risk areas. However, it does satisfy the intensity criteria under various coaxial pressure ratios at spans of 18m and 24m. The deflection meets the design specifications across different spans.
174
175
<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
176
<span style="text-align: center; font-size: 75%;">'''<small>Table 3 The variables associated with distinct seismic waves</small>'''</span></div>
177
{| style="width: 100%;margin: 1em auto 0.1em auto;border-collapse: collapse;" 
178
|-
179
|  style="border-top: 2pt solid black;border-bottom: 1pt solid black;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''Beam span'''</span>
180
|  style="border-top: 2pt solid black;border-bottom: 1pt solid black;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''n'''</span>
181
|  style="border-top: 2pt solid black;border-bottom: 1pt solid black;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''Wave peak value'''</span>
182
|  style="border-top: 2pt solid black;border-bottom: 1pt solid black;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''220'''</span>
183
|  style="border-top: 2pt solid black;border-bottom: 1pt solid black;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''310'''</span>
184
|  style="border-top: 2pt solid black;border-bottom: 1pt solid black;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''400'''</span>
185
|  style="border-top: 2pt solid black;border-bottom: 1pt solid black;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''510'''</span>
186
|  style="border-top: 2pt solid black;border-bottom: 1pt solid black;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''620'''</span>
187
|-
188
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''6m'''</span>
189
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''0.4'''</span>
190
| style="border-top:0.3px gray dashed;border-bottom:0.3px gray dashed;text-align:center;"|<span style="text-align: center; font-size: 75%;">(Interlayer displacement) <sub>max</sub></span>
191
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">39.29</span>
192
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">54.91</span>
193
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">70</span>
194
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">89.60</span>
195
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''108.61'''</span>
196
|-
197
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''6m'''</span>
198
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''0.4'''</span>
199
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">(Interlayer displacement angle) <sub>max</sub></span>
200
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0065</span>
201
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0092</span>
202
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0117</span>
203
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0149</span>
204
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''0.0181'''</span>
205
|-
206
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''6m'''</span>
207
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''0.4'''</span>
208
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">(Mid-span deflection)<sub>max</sub></span>
209
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">5.30</span>
210
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">5.46</span>
211
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">5.60</span>
212
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">5.76</span>
213
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">5.90</span>
214
|-
215
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''6m'''</span>
216
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''0.5'''</span>
217
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">(Interlayer displacement) <sub>max</sub></span>
218
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">39.63</span>
219
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">55.20</span>
220
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">70.45</span>
221
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">89.34</span>
222
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''108.67'''</span>
223
|-
224
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''6m'''</span>
225
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''0.5'''</span>
226
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">(Interlayer displacement angle) <sub>max</sub></span>
227
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0066</span>
228
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0092</span>
229
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.01174</span>
230
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0149</span>
231
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''0.0181'''</span>
232
|-
233
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''6m'''</span>
234
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''0.5'''</span>
235
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">(Mid-span deflection)<sub>max</sub></span>
236
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">6.65</span>
237
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">6.68</span>
238
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">6.81</span>
239
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">7.10</span>
240
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">7.14</span>
241
|-
242
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''12m'''</span>
243
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''0.4'''</span>
244
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">(Interlayer displacement) <sub>max</sub></span>
245
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">40.79</span>
246
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">56.36</span>
247
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">72.03</span>
248
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">91.21</span>
249
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''109.89'''</span>
250
|-
251
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''12m'''</span>
252
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''0.4'''</span>
253
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">(Interlayer displacement angle) <sub>max</sub></span>
254
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0068</span>
255
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0094</span>
256
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0120</span>
257
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0152</span>
258
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''0.0183'''</span>
259
|-
260
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''12m'''</span>
261
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''0.4'''</span>
262
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">(Mid-span deflection)<sub>max</sub></span>
263
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">13.51</span>
264
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">13.62</span>
265
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">13.79</span>
266
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">13.92</span>
267
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">14.01</span>
268
|-
269
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''12m'''</span>
270
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''0.5'''</span>
271
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">(Interlayer displacement) <sub>max</sub></span>
272
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">41.30</span>
273
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">56.51</span>
274
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">72.66</span>
275
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">91.86</span>
276
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''111.04'''</span>
277
|-
278
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''12m'''</span>
279
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''0.5'''</span>
280
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">(Interlayer displacement angle) <sub>max</sub></span>
281
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0069</span>
282
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0094</span>
283
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0121</span>
284
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0153</span>
285
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''0.0185'''</span>
286
|-
287
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''12m'''</span>
288
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''0.5'''</span>
289
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">(Mid-span deflection)<sub>max</sub></span>
290
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">16.57</span>
291
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">16.72</span>
292
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">16.80</span>
293
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">16.91</span>
294
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">17.07</span>
295
|-
296
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''18m'''</span>
297
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''0.4'''</span>
298
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">(Interlayer displacement) <sub>max</sub></span>
299
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">31.65</span>
300
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">42.57</span>
301
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">46.57</span>
302
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">58.31</span>
303
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">81.41</span>
304
|-
305
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span id='_GoBack'></span><span style="text-align: center; font-size: 75%;">'''18m'''</span>
306
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''0.4'''</span>
307
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">(Interlayer displacement angle) <sub>max</sub></span>
308
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0053</span>
309
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0071</span>
310
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0078</span>
311
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0097</span>
312
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.013665</span>
313
|-
314
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''18m'''</span>
315
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''0.4'''</span>
316
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">(Mid-span deflection)<sub>max</sub></span>
317
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">24.98</span>
318
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">24.99</span>
319
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">25.12</span>
320
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">25.68</span>
321
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">25.82</span>
322
|-
323
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''18m'''</span>
324
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''0.5'''</span>
325
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">(Interlayer displacement) <sub>max</sub></span>
326
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">32.70</span>
327
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">43.20</span>
328
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">54.79</span>
329
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">68.57</span>
330
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">82.26</span>
331
|-
332
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''18m'''</span>
333
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''0.5'''</span>
334
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">(Interlayer displacement angle) <sub>max</sub></span>
335
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0055</span>
336
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0072</span>
337
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0091</span>
338
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0114</span>
339
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0137</span>
340
|-
341
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''18m'''</span>
342
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''0.5'''</span>
343
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">(Mid-span deflection)<sub>max</sub></span>
344
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">30.24</span>
345
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">30.33</span>
346
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">30.61</span>
347
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">30.94</span>
348
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">31.10</span>
349
|-
350
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''24m'''</span>
351
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''0.4'''</span>
352
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">(Interlayer displacement) <sub>max</sub></span>
353
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">31.20</span>
354
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">41.82</span>
355
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">52.35</span>
356
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">65.33</span>
357
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">78.57</span>
358
|-
359
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''24m'''</span>
360
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''0.4'''</span>
361
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">(Interlayer displacement angle) <sub>max</sub></span>
362
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0052</span>
363
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0070</span>
364
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0087</span>
365
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0109</span>
366
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0131</span>
367
|-
368
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''24m'''</span>
369
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''0.4'''</span>
370
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">(Mid-span deflection)<sub>max</sub></span>
371
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">42.47</span>
372
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">40.76</span>
373
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">41.02</span>
374
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">41.27</span>
375
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">41.61</span>
376
|-
377
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''24m'''</span>
378
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''0.5'''</span>
379
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">(Interlayer displacement) <sub>max</sub></span>
380
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">32.48</span>
381
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">43.45</span>
382
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">53.5</span>
383
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">66.40</span>
384
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">79.36</span>
385
|-
386
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''24m'''</span>
387
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''0.5'''</span>
388
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">(Interlayer displacement angle) <sub>max</sub></span>
389
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0054</span>
390
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0072</span>
391
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0089</span>
392
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0111</span>
393
|  style="border-top: 0.3px gray dashed;border-bottom: 0.3px gray dashed;text-align: center;"|<span style="text-align: center; font-size: 75%;">0.0132</span>
394
|-
395
|  style="border-top: 0.3px gray dashed;border-bottom:  2pt solid black;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''24m'''</span>
396
|  style="border-top: 0.3px gray dashed;border-bottom:  2pt solid black;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''0.5'''</span>
397
|  style="border-top: 0.3px gray dashed;border-bottom:  2pt solid black;text-align: center;"|<span style="text-align: center; font-size: 75%;">(Mid-span deflection)<sub>max</sub></span>
398
|  style="border-top: 0.3px gray dashed;border-bottom:  2pt solid black;text-align: center;"|<span style="text-align: center; font-size: 75%;">50.31</span>
399
|  style="border-top: 0.3px gray dashed;border-bottom:  2pt solid black;text-align: center;"|<span style="text-align: center; font-size: 75%;">48.03</span>
400
|  style="border-top: 0.3px gray dashed;border-bottom:  2pt solid black;text-align: center;"|<span style="text-align: center; font-size: 75%;">50.61</span>
401
|  style="border-top: 0.3px gray dashed;border-bottom:  2pt solid black;text-align: center;"|<span style="text-align: center; font-size: 75%;">50.98</span>
402
|  style="border-top: 0.3px gray dashed;border-bottom:  2pt solid black;text-align: center;"|<span style="text-align: center; font-size: 75%;">50.14</span>
403
|}
404
<span style="text-align: center; font-size: 75%;">Note: The peak amplitude of seismic waves is measured in cm/s2, while displacement and deflection are measured in mm.</span>
405
406
407
408
409
410
{| style="width: 100%;border-collapse: collapse;" 
411
|-
412
|  style="text-align: center;vertical-align: top;width: 50%;"|
413
[[Image:Review_737505923211-image15.png|center|318px]]
414
415
|  style="text-align: center;vertical-align: top;width: 50%;"|
416
[[Image:Review_737505923211-image16.png|center|312px]]
417
418
|}
419
<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
420
<span style="text-align: center;">'''Figure 6 The maximum angle of inter-story displacement'''</span></div>
421
422
423
The inter-story displacement and inter-story displacement angle remain unaffected by the axial compression ratio, as evidenced in Figure 6 and Figure 7, while their values exhibit an increasing trend with higher seismic wave intensity.
424
425
{| style="width: 100%;margin: 1em auto 0.1em auto;" 
426
|-
427
|  style="vertical-align: top;"|<span style="text-align: center; font-size: 60%;">
428
[[Image:Review_737505923211-image17.png|center|258px]]
429
''' '''<small>a1-Span-6m-Axial compression ratio=0.4</small>'''  '''</span>
430
|  style="vertical-align: top;"|<span style="text-align: center; font-size: 60%;">
431
[[Image:Review_737505923211-image18-c.png|center|258px]]
432
''' '''<small>a2-Span-6m-Axial compression ratio=0.5</small>'''  '''</span>
433
|-
434
|  style="vertical-align: top;"|<span style="text-align: center; font-size: 60%;">
435
[[Image:Review_737505923211-image19.png|center|264px]]
436
''' '''<small>b1-Span-12m-Axial compression ratio=0.4</small>'''  '''
437
</span>
438
|  style="text-align: center;vertical-align: top;"|<span style="text-align: center; font-size: 60%;">
439
[[Image:Review_737505923211-image20.png|center|270px]]
440
'''<small>'''b2-Span-12m-Axial compression ratio=0.5'''</small>'''</span>
441
|-
442
|  style="vertical-align: top;"|<span style="text-align: center; font-size: 60%;">
443
[[Image:Review_737505923211-image21.png|center|276px]]
444
''' '''<small>c1-Span-18m-Axial compression ratio=0.4</small>'''  '''
445
</span>
446
|  style="vertical-align: top;"|<span style="text-align: center; font-size: 60%;">
447
[[Image:Review_737505923211-image22.png|center|282px]]
448
''' '''<small>c2-Span-18m-Axial compression ratio=0.5</small>''' '''
449
</span>
450
|-
451
|  style="vertical-align: top;"|<span style="text-align: center; font-size: 60%;"> 
452
[[Image:Review_737505923211-image23.png|center|282px]]
453
''' '''<small>d1-Span-24m-Axial compression ratio=0.4</small>''' ''' 
454
</span>
455
|  style="vertical-align: top;"|<span style="text-align: center; font-size: 60%;">
456
[[Image:Review_737505923211-image24.png|center|282px]]
457
''' '''<small>d2-Span-24m-Axial compression ratio=0.5</small>''' '''   </span>
458
|}
459
<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
460
<span style="text-align: center; ">'''Figure 7 Time-history curves illustrating the response of different spans and axial compression ratios'''</span></div>
461
462
463
The greater the acceleration of an earthquake, the more severe the structural damage it inflicts.  In this case study, we analyze the force cloud diagram of a member subjected to an intensity level of 9 degrees.  According to Table 4, when the axial compression ratio ranges from 0.4 to 0.5, the member does not reach its yield strength and stress values decrease as span length increases.  The structure experiences a maximum internal force of 647.7kN at an axial compression ratio approximately equal to 0.52;  however, even at its highest stress value of 224.9MPa, it remains below its yield point and thus avoids any structural damage.      '''                            '''
464
465
<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
466
<span style="text-align: center; font-size: 75%;">'''<small>Table 4 The cloud picture with varying spans and axial compression ratios</small>'''</span></div>
467
{| style="width: 100%;border-collapse: collapse;" 
468
|-
469
|  style="border-top: 2pt solid black;border-bottom: 1pt solid black;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''Span'''</span>
470
| style="border-top: 2pt solid black;border-bottom: 1pt solid black;text-align: center;vertical-align: top;"|<span style="text-align: center; font-size: 75%;">'''The axial compression ratio is 0.4'''</span>
471
| style="border-top: 2pt solid black;border-bottom: 1pt solid black;text-align: center;vertical-align: top;"|<span style="text-align: center; font-size: 75%;">'''The axial compression ratio is 0.5'''</span>
472
|-
473
|  tyle="text-align: center;vertical-align: centre;width: 50%""|6m
474
|  tyle="text-align: center;vertical-align: centre;width: 50%"| [[Image:Review_737505923211-image25.png|center|282px]] 
475
|  tyle="text-align: center;vertical-align: centre;width: 50%"|[[Image:Review_737505923211-image26.png|center|282px]] 
476
|-
477
|  tyle="text-align: center;vertical-align: centre;width: 50%""|12m
478
|  tyle="text-align: center;vertical-align: centre;width: 50%""| [[Image:Review_737505923211-image27.png|center|276px]]
479
|  tyle="text-align: center;vertical-align: centre;width: 50%""| [[Image:Review_737505923211-image28.png|center|282px]] 
480
|-
481
|  tyle="text-align: center;vertical-align: centre;width: 50%""|18m
482
|  tyle="text-align: center;vertical-align: centre;width: 50%""| [[Image:Review_737505923211-image29.png|center|276px]]
483
|  tyle="text-align: center;vertical-align: centre;width: 50%""| [[Image:Review_737505923211-image30.png|center|282px]] 
484
|-
485
|  style="border-bottom: 2pt solid black;vertical-align: center;"|24m
486
|  style="border-bottom: 2pt solid black;vertical-align: center;"| [[Image:Review_737505923211-image31.png|center|276px]] 
487
|  style="border-bottom: 2pt solid black;vertical-align: center;"| [[Image:Review_737505923211-image32.png|center|282px]] 
488
|}
489
490
491
{| style="width: 100%;" 
492
|-
493
|  style="vertical-align: top;"|'''
494
[[Image:Review_737505923211-image33.png|center|258px]]
495
'''
496
|  style="vertical-align: top;"|'''
497
[[Image:Review_737505923211-image34.png|center|276px]]
498
'''
499
|}
500
<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
501
<span style="text-align: center;">'''Figure 8 The stress-strain curves for various spans and axial compression ratios'''</span></div>
502
503
504
The stress-strain curves depicted in Figure 8 for various beam spans and axial compression ratios demonstrate that irrespective of whether the axial compression ratio is 0.4 or 0.5, the observed elastic behavior persists within the range of beam spans from 6 to 24m. This characteristic enhances its ability to withstand external loads and seismic forces.
505
506
(2) When the axial compression ratio is 0.6, 0.7 and 0.8
507
508
As analyzed in the previous text, it can be seen that when the beam spans are 6m and 12m, the inter-story displacement limit cannot be satisfied under the influence of rare earthquakes at a magnitude of 9 degrees. This is primarily attributed to the susceptibility of small span-to-height ratio connected beams to brittle shear failure during seismic events. However, as the span-to-height ratio increases, their mechanical behavior gradually approaches that of conventional frame beams, resulting in improved seismic performance <span id='citeF-1'></span>[[#cite-1|[14-17]]]. Consequently, it can be inferred that even with larger axial pressure ratios, both 6m and 12m spans still fail to meet the requirements for rare earthquakes at a magnitude of 9 degrees. To further investigate the maximum achievable axial compression ratio for corrugated rigid frames, similar methods will be employed to analyze structural failure under rare earthquake conditions at magnitudes of 9 degrees when subjected to axial compression ratios of 0.6 and 0.7.
509
510
{| style="width: 100%;margin: 1em auto 0.1em auto;" 
511
|-
512
|  style="vertical-align: top;"|<span style="text-align: center; font-size: 75%;"> 
513
[[Image:Draft_Hui-min_632690981-image45.png|center||276px]] 
514
<small>a1-Span-6m-Axial compression ratio=0.6</small>   </span>
515
|  style="vertical-align: top;"|<span style="text-align: center; font-size: 75%;">
516
[[Image:Draft_Hui-min_632690981-image46.png|center|282px]]
517
<small>a2-Span-6m-Axial compression ratio=0.7</small>  </span>
518
|-
519
|  style="vertical-align: top;"|<span style="text-align: center; font-size: 75%;">
520
[[Image:Draft_Hui-min_632690981-image47.png|center|282px]]
521
<small>b1-Span-12m-Axial compression ratio=0.6</small> </span>
522
|  style="text-align: center;vertical-align: top;"|<span style="text-align: center; font-size: 75%;"> 
523
[[Image:Draft_Hui-min_632690981-image48.png|center||282px]]
524
<small>b2-Span-12m-Axial compression ratio=0.7</small></span>
525
|-
526
|  style="vertical-align: top;"|<span style="text-align: center; font-size: 75%;">
527
[[Image:Draft_Hui-min_632690981-image49.png|center|282px]]
528
<small>c1-Span-18m-Axial compression ratio=0.6</small>                                             </span>
529
|  style="vertical-align: top;"|<span style="text-align: center; font-size: 75%;">
530
[[Image:Draft_Hui-min_632690981-image50.png|center|282px]]
531
<small>c2-Span-18m-Axial compression ratio=0.7</small></span>
532
|-
533
|  style="vertical-align: top;"|<span style="text-align: center; font-size: 75%;">
534
[[Image:Draft_Hui-min_632690981-image51.png|center|282px]]
535
<small>d1-Span-24m-Axial compression ratio=0.6</small>                                           </span>
536
|  style="vertical-align: top;"|<span style="text-align: center; font-size: 75%;">
537
[[Image:Draft_Hui-min_632690981-image52.png|center|282px]]
538
</span>
539
540
<span style="text-align: center; font-size: 75%;"><small>d2-Span-24m-Axial compression ratio=0.7</small>  </span>
541
|}
542
<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
543
<span style="text-align: center; ">'''Figure 9 Interlayer displacement curves with varying spans and coaxial pressure ratios'''</span></div>
544
545
546
''The Technical code for the steel structure of the light-weight building with gabled frames(GB51022:2015)'' and Figure 9 and Figure 10 showed the inter-story displacement fails to meet the code requirements under the influence of a 9-degree rare earthquake for beam spans of 6m and 12m, but it satisfies the requirements for spans of 18m and 24m. Figure 11  demonstrates that the deflection complies with the code specifications. This conclusion remains consistent when considering coaxial compression ratios of both 0.4 and 0.5.
547
548
{| style="width: 100%;" 
549
|-
550
|  style="vertical-align: top;width: 50%;"|
551
[[Image:Draft_Hui-min_632690981-image53.png|center|294px]]
552
553
|  style="vertical-align: top;width: 50%;"|
554
[[Image:Draft_Hui-min_632690981-image54.png|center|294px]]
555
556
|}
557
558
<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
559
<span style="text-align: center; font-size: 85%;">'''Figure 10 The maximum angle of inter-story displacement'''</span></div>
560
561
<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
562
''' [[Image:Draft_Hui-min_632690981-image55.png|348px]] '''</div>
563
564
<div id="_GoBack" class="center" style="width: auto; margin-left: auto; margin-right: auto;">
565
<span style="text-align: center; font-size: 85%;">'''Figure 11 Deflection and Limit Values under Different Spans and Axial Compression Ratios for 9-Degree Rare Earthquakes'''</span></div>
566
567
568
The stress-strain curve in Figure 12 demonstrates a distinct hysteretic characteristic as the axial compression ratio increases, with a more pronounced effect observed at higher ratios. This indicates that the rigid frame beam undergoes plastic deformation as the axial compression ratio rises, and this deformation becomes more significant with increasing compression. To ensure optimal seismic characteristics of the rigid frame structure, it is advisable to maintain the structure predominantly within the elastic stress stage. Therefore, based on the aforementioned conclusion, it can be inferred that even with an axial compression ratio of 0.5, the rigid frame structure still exhibits favorable seismic characteristics.
569
570
{| style="width: 100%;" 
571
|-
572
|  style="vertical-align: top;width: 50%;"|[[Image:Draft_Hui-min_632690981-image56.png|306px]] 
573
|  style="vertical-align: top;width: 49%;"|[[Image:Draft_Hui-min_632690981-image57.png|300px]] 
574
|}
575
576
577
<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
578
<span style="text-align: center; font-size: 75%;">'''Figure 12 The stress-strain curves for various spans and axial compression ratios'''</span></div>
579
580
=4 Quasi-static analysis=
581
582
In the section of quasi-static hysteretic analysis, one end is fully consolidated, meaning that all six degrees of freedom are constrained to zero, while the other end is subjected to loading. The loading end applies a displacement amplitude in the vertical beam direction when the axial compression ratio is set at 0.4 and 0.5 respectively. The displacement starts from 0 mm and incrementally increases to 180 mm step by step. Simultaneously, the corresponding duration of each amplitude is defined in the analysis step<span id='citeF-1'></span>[[#cite-1|[18,19]]], as depicted in Figure 13.
583
584
[[Image:Review_737505923211-image43.png|center|360px]]
585
'''
586
'''
587
<span style="text-align: center; font-size: 85%;">'''
588
<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
589
'''Figure 13  Loading System'''</div>
590
591
592
The hysteresis curves presented in Table 5 and the Mises cloud graph demonstrate that variations in axial compression ratio have minimal influence on the hysteresis loop. At a span of 6m, the hysteresis curve exhibits maximum completeness with a slight pinch and possesses the highest capacity for energy dissipation. The skeleton curve encompasses all three stages of elasticity, elastic-plasticity, and plasticity<span id='citeF-1'></span>[[#cite-1|[20]]], while localized failure occurs at the beam ends upon reaching their yield limit.
593
594
When the beam span is 12m, the hysteretic curve exhibits significant pinching, and the beam undergoes noticeable torsion under displacement loading. At this juncture, failure of the steel beam no longer occurs solely at its end but rather manifests as local buckling at the point of torsion.
595
596
The area enclosed by the hysteretic loop gradually decreases with an increase in the shear-span ratio, as illustrated in Table 6. Moreover, the hysteretic curve exhibits significant pinching and slipping, resulting in a reduced external force required for the same displacement and diminished energy dissipation. At an 18m span, the torsional slip of the member is pronounced; however, at a 24m span, the member demonstrates nearly elastic deformation albeit with noticeably decreased energy dissipation<span id='citeF-1'></span>[[#cite-1|[21]]].
597
598
The conclusion can be inferred that, for a specific axial compression ratio, the hysteresis analysis load capacity of the structure decreases as the span length increases. Moreover, it is observed that the hysteretic performance is minimally affected by the axial compression ratio; however, low cyclic loads still provide valuable insights for seismic analysis.
599
600
<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
601
<span style="text-align: center; font-size: 75%;">'''
602
'''Table 5 Time Delay Loop Curve and Cloud Chart for Different Axial Pressure Ratios'''</span></div>
603
604
{| style="width: 100%;border-collapse: collapse;" 
605
|-
606
|  style="border-top: 2pt solid black;border-bottom: 1pt solid black;text-align: center;"|<span style="text-align: center; font-size: 75%;">'''Span'''</span>
607
|  style="border-top: 2pt solid black;border-bottom: 1pt solid black;text-align: center;"|'''Hysteretic curve'''
608
|  style="border-top: 2pt solid black;border-bottom: 1pt solid black;text-align: center;"|'''Mises cloud picture'''
609
|-
610
|  tyle="text-align: center;vertical-align: centre;width: 50%"|6m 
611
|  tyle="text-align: center;vertical-align: centre;width: 50%"|[[Image:Review_737505923211-image44.png|center|282px]]
612
|  tyle="text-align: center;vertical-align:centre;width: 50%"|[[Image:Review_737505923211-image45.png|center|282px]]
613
|-
614
| tyle="text-align: center;vertical-align:centre;width: 50%"|12m
615
| tyle="text-align: center;vertical-align:centre;width: 50%"|[[Image:Review_737505923211-image46.png|center|282px]]
616
| tyle="text-align: center;vertical-align:centre;width: 50%"|[[Image:Review_737505923211-image47.png|center|282px]]
617
|-
618
|  tyle="text-align: center;vertical-align:centre;width: 50%""|18
619
|  tyle="text-align: center;vertical-align:centre;width: 50%"| [[Image:Review_737505923211-image48.png|center|282px]]
620
|  tyle="text-align: center;vertical-align:centre;width: 50%"|[[Image:Review_737505923211-image49.png|center|282px]]
621
|-
622
|  tyle="text-align: center;vertical-align:centre;width: 50%""|24m
623
|  tyle="text-align: center;vertical-align:centre;width: 50%"|[[Image:Review_737505923211-image50.png|center|282px]]
624
|  tyle="text-align: center;vertical-align:centre;width: 50%"|[[File:Review_737505923211_3847_1700309441883.jpg|center|340px]]
625
|}
626
627
== '''5 Conclusions'''==
628
629
1. The rigid frame beam spans ranging from 6 to 24m are designed to withstand earthquakes of up to 8 degrees or lower, while the spans of 18m and 24m can simultaneously resist earthquakes of magnitude 9 and below. Therefore, it is essential to carefully control the beam span to ensure optimal seismic resistance for the structure.
630
631
2. To ensure that structural failure always occurs within the elastic stage, it is crucial to limit the axial compression ratio and ensure a sound structural design. The utilization of corrugated web rigid frame structures may be appropriate in regions with infrequent seismic activity exceeding 7 degrees, provided that the axial compression ratio does not surpass 0.5.
632
633
3. The axial compression ratio has little influence on the hysteretic performance of the members. With the increase of the span, the members will slip, the hysteretic curve will shrink, and the energy dissipation will become smaller, which is not conducive to the earthquake resistance of the structure.
634
635
=='''Acknowledgments'''==
636
637
The authors would like to thank The Scientific Research Program Funded by Education Department of Shaanxi Provincial Government (Program No.23JK0532);Youth fund project at Xi’an Jiaotong Engineering Institute(2023KY-39) and The Youth Innovation Team of Shaanxi Universities.
638
639
=='''Reference'''==
640
<div id="cite-1"></div>
641
'''[[#citeF-1|[1]]]'''  Chen Haoyu. Analysis and discussion on the application of prefabricated design and construction in green buildings. China Residential Facilities, 06(37-39), 2023,(inChinese).
642
<div id="cite-1"></div>
643
'''[[#citeF-1|[2]]]'''  Alexander Ibragimov, Ekaterina Zinoveva, and Stanislav Rosinskiy. Prefabricated steel structures with a corrugated web (part 1. beam). IOP Conference Series Materials Science and Engineering, 869:072041, 2020.
644
<div id="cite-1"></div>
645
'''[[#citeF-1|[3]]]''' JIANG Lizhong, ZHONG Tianxuan, TAN Zhihua, ZHOU Wangbao, and WU Lingxu XU Tianxin. Study on seismic performance of steel-concrete composite box girder with corrugated web. Journal of Railway Science and Engineering, 18(555-563), 2021,(in Chinese).
646
<div id="cite-1"></div>
647
'''[[#citeF-1|[4]]]''' Feng Wen-zhang, Liu Bao-dong, Mou Kai, and Wang Hai. Research on seismic performance of continuous Rigid-frame bridge with corrugated steel webs. Earthquake Resistant Engineering and Retrofitting, 37(70-74), 2015,(in Chinese).
648
<div id="cite-1"></div>
649
'''[[#citeF-1|[5]]]'''  LI Peng-fei, LIU Bao-dong, and XIAOYing-nan. Influence of pier types on dynamic characteristics of continuous rigid frame bridge with corrugated steel webs. Bridge construction, (2):3, 2011,(in Chinese).
650
<div id="cite-1"></div>
651
'''[[#citeF-1|[6]]]'''  Wan-yu. Seismic performance analysis of h-shaped steel cantilever beam and frame with corrugated web. Master’s thesis, Nanchang University, 2022,(in Chinese).
652
<div id="cite-1"></div>
653
'''[[#citeF-1|[7]]]'''  Peng Jiacheng. Theoretical and experimental study and analysis of damping effects on corrugated web damper. Master’s thesis, Huazhong University of Science and Technology, 2020.
654
<div id="cite-1"></div>
655
'''[[#citeF-1|[8]]]'''  Xingyu Mou, Henglin Lv, and Xian Li. Seismic performance of corrugated steel plate composite shear walls with various configurations. In Structures, volume 57, page 105133. Elsevier, 2023.
656
<div id="cite-1"></div>
657
'''[[#citeF-1|[9]]]'''  Technical specification for application of corrugated web steel structures 291:2011.
658
<div id="cite-1"></div>
659
'''[[#citeF-1|[10]]]'''  Ltd. China Institute of Building Standard Design Research Co. Technical Specification for Steel Structures of Ligh-tweight Buildings with gabled frames GB51022-2015.Technical Specification for Steel Structures of Ligh-tweight Buildings with gabled frames GB51022-2015, 2003.
660
<div id="cite-1"></div>
661
'''[[#citeF-1|[11]]]'''  Cheng jin. Analysis of overall stability performance of h-shaped steel axial compression members with corrugated webs. Master’s thesis, Southwest Petroleum University,2017.16
662
<div id="cite-1"></div>
663
'''[[#citeF-1|[12]]]'''  Shahnewaz M, Dickof C, Tannert T. Experimental investigation of the hysteretic behaviour of single-story single-and coupled-panel CLT shear walls with nailed connections[J]. Engineering Structures, 2023, 291: 116443.
664
<div id="cite-1"></div>
665
'''[[#citeF-1|[13]]]'''  Editorial Board of the Encyclopedia of Earthquake Prevention and Disaster Reduction in China. Earthquake engineering. Earthquake engineering, 2010,( in Chinese).
666
<div id="cite-1"></div>
667
'''[[#citeF-1|[14]]]'''  HU Qi. Study on the seismic performance of coupling beam in coupled shearwall. PhD thesis, Hefei University of Technology, 2013,( in Chinese).
668
<div id="cite-1"></div>
669
'''[[#citeF-1|[15]]]'''  HAN Xiaolei and Liang Qizhi. Study on the structural control performance of coupled shear walls with a stiffening beam. South ChinaUniversity of Technology, 1991: 2. (in Chinese).
670
<div id="cite-1"></div>
671
'''[[#citeF-1|[16]]]'''  LIANG Oizhiand HANXiaolei. Performance of rigid and ordinary connecting beams under low cycle repeated loading. Journal of South China University of Technology (Natural Sciences), 000(001):27–33, 1995,( in Chinese).
672
<div id="cite-1"></div>
673
'''[[#citeF-1|[17]]]'''  FEDERAL EMERGENCY FEMA 356 et al. Prestandard and commentary for the seismic rehabilitation of buildings. Federal Emergency Management Agency: Washington, DC, USA, 2000.
674
<div id="cite-1"></div>
675
'''[[#citeF-1|[18]]]'''  WANG Ming-qing, ZHANG Zhi, CHEN Zhen-hai, HAN Yi, and LIU Yuan-zhen.Seismic performance analysis of new connection nodes between embedded wall panels and steel frames. Science Technology and Engineering, 23(18):7868–7877, 2023.
676
<div id="cite-1"></div>
677
'''[[#citeF-1|[19]]]'''  Guofeng Xue, Wei Bao, Jin Jiang, and Yongsong Shao. Hysteretic behavior of beam-to-column joints with cast steel connectors. Shock and Vibration, 2019:1–20, 2019.
678
<div id="cite-1"></div>
679
'''[[#citeF-1|[20]]]'''  Zhang Li and Xu Yafeng. Analysis of the influence of different axial compression ratios on the hysteresis performance of carbon fiber reinforced steel reinforced concrete filled steel tube columns. In Proceedings of the 8th Shenyang Scientific Academic Annual Conference, pages 601–606.
680
<div id="cite-1"></div>
681
'''[[#citeF-1|[21]]]'''  LV Liang, SUN Guohua, and YANG Weixing. Influence of axial compression ratio on hysteretic behavior of i-shaped steel tube bundle high strength concrete composite shear wall. Journal of Suzhou University of Science and Technology(Engineering and Technology Edition), 36(1):8–14, 2023.
682

Return to Hui-min 2023a.

Back to Top