Flexoelectricity is an electromechanical effect coupling polarization to strain gradients. It fundamentally differs from piezoelectricity because of its size-dependence and symmetry. Flexoelectricity is generally perceived as a small effect noticeable only at the nanoscale. Since ferroelectric ceramics have a particularly high flexoelectric coefficient, however, it may play a significant role as piezoelectric transducers shrink to the submicrometer scale. We examine this issue with a continuum model self-consistently treating piezo- and flexoelectricity. We show that in piezoelectric device configurations that induce strain gradients and at small but technologically relevant scales, the electromechanical coupling may be dominated by flexoelectricity. More importantly, depending on the device design flexoelectricity may enhance or reduce the effective piezoelectric effect. Focusing on bimorph configurations, we show that configurations that are equivalent at large scales exhibit dramatically different behavior for thicknesses below 100¿nm for typical piezoelectric materials. Our results suggest flexoelectric-aware designs for small-scale piezoelectric bimorph transducers.
Abstract
Flexoelectricity is an electromechanical effect coupling polarization to strain gradients. It fundamentally differs from piezoelectricity because of [...]
Heat dissipation is an issue that is acquiring great importance to increase the efficiency in the utilization of the energy and extending the lifespan of the equipment. Traditionally, heat dissipation has been carried out using metals, but the increase in the requirements of equipment and devices, composites have gained importance. Graphite based composites have relevance in heat dissipation, particularly when the disperse material is a metal or metal carbide. The reason is the great value of thermal conductivity combined with good mechanical properties and lightness. Research has focused until nowadays on the composite graphite-MoC, although there are other composites with great potential, as that proposed in this manuscript: graphite- Cr3C2. The preparation of the composite graphite-Cr3C2 consisted in mechanical mixing of the staring powders, subsequent obtaining of the green compact of 40 mm in diameter and, finally, sintering at 2000 °C for 20 minutes under an applied pressure of 30 MPa in the Spark Plasma Sintering apparatus. The sintered material exhibited electrical and thermal conductivities in the in-plane direction of 1.08 MS/m and 215 W/m · °C, respectively, and a flexural strength of 113 MPa, which makes this material a suitable candidate for its application in heat dissipation.
Abstract
Heat dissipation is an issue that is acquiring great importance to increase the efficiency in the utilization of the energy and extending the lifespan of the equipment. Traditionally, heat dissipation has been [...]