Abstract
"International Conference on Prospects for Research in Transport and Logistics on a Global - Regional Perspective" has undertaken the challenge to host very important experts and practitioners of Transport and Logistics from a large spectrum of countries. In our opinion, the conference has fulfilled the purpose of establishing an International Society; "Eurasian and Eastern Mediterranean Institute of Transportation and Logistics Association (EMIT)" that is expected to have a very promising role in the Eurasian and Eastern Mediterranean countries. The purpose of the Association is to contribute to establishing and developing the exchange of research work between all parts of the world in all fields of transportation and logistics. This proceedings book consists of 13 chapters, grouping the contributed papers into the following categories: Global Issues in Logistics and Transportation (3 papers), Regional Issues in Logistics and Transportation (2 papers), Education and Training in Logistics and Transportation (2 papers), Supply Chain Management (3 papers), Sustainable Transport Policies, Traffic Engineering (4 papers), Evaluation of Public Policies, Network Models and Environment (4 papers), Contemporary Topics in Transport and Logistics (7 papers), Transport Planning and Economics (3 papers), Planning, Operations, Management and Control of Transport and Logistics (3 papers), Transport Modeling (5 papers), Freight Transportation and Logistics Management (7 papers), Transport and Land Use (3 papers), Transport Infrastructure and Investment Appraisal (2 papers) It can be readily seen from this volume of selected papers that all papers do elaborate on rather timely problems in the fields of expertise related to Transport and Logistics, which have a considerable global importance. TÃBÄ°TAK; DoÄuÅ Ãniversitesi ; Uluslararası Nakliyeciler DerneÄi ; Ä°DO ; Tırsan ; Türk Hava Yolları Committees, i -- Words of Welcome and Gratitude, ii -- Introduction, iii -- Chapter 1 Global Issues in Logistics and Transportation, 1 -- Potential to Reduce GHG through Efficient Logistic Concepts, 3 -- Werner Rothengatter -- A methodological framework for the evaluation and prioritisation of multinational transport projects: the Case of euro-asian transport linkages, 21 / Dimitrios TSAMBOULAS, Angeliki KOPSACHEILI -- Container port throughput performance - case study: Far east, north west european and mediterranean ports, 29 / Vesna DRAGOVIC-RADINOVIC, Branislav DRAGOVIC, Maja SKURIC, EmirÄIKMIROVlC and Ivan KRAPOVIC -- Chapter 2 Regional Issues in Logistics and Transportation, 35 -- Logistics service providers in turkey: A panel data analysis, 37 / Emel AKTAÅ, Füsun ÃLENGÄ°N, Berrin AÄARAN, Åule ÃNSEL -- Milestones in the process of survey preparation for the logistics sector: case study for Istanbul, Turkey, 43 / Evren POSACI, Darçın AKIN -- Chapter 3 Education and Training in Logistics and Transportation, 51 -- Education in transport and logistics in an age of global economy, 53 / Yücel Candemlr -- The role of education and training in the supply chain sector, 59 / David Maunder -- Chapter 4 Supply Chain Management, 64 -- Modeling reverse flows in a closed -loop supply chain network, 67 / Vildan ÃZKIR, Ãnder ÃNDEMÄ°R and Hüseyin BAÅLIGÄ°L -- Strategic analysis of green supply chain management practices in T urkish automotive industry, 73 / Gülçin BÃYÃKÃZKAN and AliÅan ÃAPAN -- A new framework for port competitiveness: the network approach, 79 / Marcella DE MARTINO, Alfonso MORVILLO -- Chapter 5 Sustainable Transport Policies, Traffic Engineering, 87 -- Clean transport: innovative solutions to the creation of a more sustainable urban transport system, 89 / Ela BABALIK-SUTCLIFFE -- Effects of urban bottlenecks on highway traffic congestion: case study of Istanbul, Turkey, 95 / Darçın AKIN and Mehtap ÃELÄ°K -- Establishing an effective training module for IMDG code in MET institutions, 105 / Kadir CICEK, Metin CELIK -- An investment decision aid proposal towards choice of container terminal operating systems based on information axioms, 109 / Metin CELIK, Selcuk CEBI -- Chapter 6 Evaluation of Public Policies, Network Models and Environment, 115 -- Possibilistic linear programming approach for strategic resource planning, 117 / Ãzgür KABAK, Füsun ÃLENGÄ°N -- A structural equation model for measuring service quality in passenger transportation, 125 / G.Nilay YÃCENUR and Nihan ÃETÄ°N DEMÄ°REL -- Analysis of potential gain from using hybrid vehicles in public transportation, 133 / Ä°rem DÃZDAR and Ãzay ÃZAYDIN -- Optimization of e-waste management in Marmara region - Turkey, 141 / Ä°lke BEREKETLÄ°, Müjde EROL GENEVOIS -- Chapter 7 Contemporary Topics in Transport and Logistics, 147 -- Future prospects on urban logistic research, 149 / Rosârio MACÃRIO, Vasco REIS -- An analyze of relationship between container ships and ports development, 155 / Branislav DRAGOVIC, Vesna Dragovic-Radinovic, Dusanka Jovovic, Romeo Mestrovic and Emir Äikmirovic -- A holistic framework for performance measurement in logistics management, 161 / Yasemin Claire ERENSAL -- Heuristics for a generalization of tsp in the context of PCB assembly, 167 / Ali Fuat ALKAYA and Ekrem DUMAN -- Premium e-grocery: Exploring value in logistics integrated service solutions, 173 / Burçin BOZKAYA, Ronan De KERVENOAEL and D. Selcen Ã. AYKAà -- T ravelers response to VMS in the Athens area, 179 / Athena TSIRIMPA and Amalia POLYDOROPOULOU -- Regional airports and local development: the challenging balance between sustainability and economic growth, 189 / Rosârio MACÃRIO and Jorge SILVA -- Chapter 8 Transport Planning and Economics, 195 -- How financial constraints and non-optimal pricing affect the design of public transport services, 197 / Sergio R. Jara-Diaz and Antonio Gschwender -- Revenue management for returned products in reverse logistics, 203 / Mesut KUMRU -- Intra-city bus planning using computer simulation, 211 / Reza AZIMI and Amin ALVANCHI -- Chapter 9 Planning, Operations, Management and Control of Transport and Logistics, 217 -- A review of timetabling and resource allocation models for light-rail transportation systems, 219 / Selmin D. ÃNCÃL, D. Selcen Ã. AYKAÃ, Demet BAYRAKTAR and Dilay ÃELEBÄ° -- An approach of integrated logistics HMMS model under environment constraints and an application of time scale, 225 / Fahriye Uysal, Ãmür Tosun, Orhan Kuruüzüm -- Freight transport planning with genetic algorithm based projected demand, 231 / Soner HALDENBILEN, Ozgur BASKAN, Huseyin CEYLAN and Halim CEYLAN -- Chapter 10 Transport Modeling, 239 -- Inverse model to estimate o-d matrix from link traffic counts using ant colony optimization, 241 / Halim CEYLAN, Soner HALDENBILEN, Huseyin CEYLAN, Ozgur BASKAN -- The impact of logistics on modelling commercial freight traffic, 251 / Ute IDDINK and Uwe CLAUSEN -- A comparative reviewof simulation-based behavior modeling for travel demand generation, 257 / Seda Yanık, Mehmet TanyaÅ -- An efficiency analysis of turkish container ports using the analytic network process, 269 / Senay OÄUZTÄ°MUR, Umut Rıfat TUZKAYA -- A multi-objective approach to designing a multicommudity supply chain distribution network with multiple capacities, 277 / Gholam Reza Nasiri, Hamid Davoudpour and B.Karimi -- Chapter 11 Freight Transportation and Logistics Management, 283 -- Evaluation of turkeyâs freight transportation, 285 / Burcu KULELÄ° PAKand BaharSENNAROÄLU -- Short sea shipping, intermodality and parameters influencing pricing policies in the Mediterranean region: The Italian context, 291 / Monica GROSSO, Ana-Rita LYNCE, Anne SILLA, Georgios K. VAGGELAS -- Relevant strategic criteria when choosing a container port - the case of the port of Genoa, 299 / Monica Grosso, Feliciana Monteiro -- Determination of optimum fleet size and composition - A case study of retailer in Thailand, 307 / Terdsak RONGVIRIYAPANICH and Kawee SRIMUANG -- New container port development: forecasting future container throughput, 313 / Dimitrios TSAMBOULAS, Panayota MORAITI -- Sea port hinterland flows and opening hours: the way forward to make them match better 319 / Marjan BEELEN, Hilde MEERSMAN, Evy ONGHENA, Eddy VAN DE VOORDE and Thierry VANELSLANDER -- International road freight transport in Germany and the Netherlands driver costs analysis and French perspectives, 327 / Laurent GUIHERY -- Chapter 12 Transport and Land Use, 335 -- Land rent and new transport infrastructure: How to manage this relationship?, 337 / Elena SCOPEL -- Effects of pavement characteristics on the traffic noise levels, 345 / Aybike ONGEL and John HARVEY -- Fuzzy medical waste disposal facility location problem, 351 / YeÅim KOP, Müjde EROL GENEVOIS and H. Ziya ULUKAN -- Chapter 13 T ransport Infrastructure and Investment Appraisal, 357 -- Agentsâ behavior in financing Italian transport infrastructures, 359 / Paolo BERIA -- Free trade agreements in the mediterranean region: a box-cox analysis, 367 / Matthew KARLAFTIS, Konstantinos KEPAPTSOGLOU and Dimitrios TSAMBOULASAbstract
"International Conference on Prospects for Research in Transport and Logistics on a Global - Regional Perspective" has undertaken the challenge to host very important experts and practitioners of Transport and Logistics from a large spectrum of countries. In our opinion, the conference [...]Abstract
Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2015Abstract
Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2015 Thesis (M.Sc.) -- İstanbul Technical University, Instıtute of Science and Technology, 2015 Metro depo sahasında; araçların park edilmesi, işletilmesi, temizliği, bakım ve onarımı, tamir ve yenilenmesi, günlük bakımı, malzemelerin sağlanması gibi gereksinimleri karşılayacak tesisler bulunmaktadır. Bu tesislerin tasarımı yapılarken dikkat edilmesi gereken birçok etken ve tasarım ölçütü vardır. Bu tez çalışmasında öncelikli olarak İstanbul’daki metro hatlarından ve bu metro hatlarının depo sahalarından söz edilmiştir. Ardından metro depo sahasının tanımı ve bileşenleri açıklanmış, metro depo sahası tasarımını etkileyen etkenler ve tasarım ölçütleri sıralanmıştır. Daha sonra İstanbul Üsküdar-Ümraniye-Çekmeköy metro hattı depo sahası anlatılarak, ihale dokümanındaki uygulamaya esas kesin proje tasarımı incelenmiş ve yeni bir metro depo sahası ön proje tasarımı geliştirilmiştir. Elde edilen sonuçlar belirlenerek, metro depo sahası tasarımı yapılırken göz önünde bulundurulması gereken yeni öneri ve yaklaşımlar getirilmiştir. Metro depo sahası tasarımını etkileyen etkenler; konum ve yer seçimi, işletme, atölye binası ve bakım hizmetleri, araç park hatları, metro araç özellikleri, karayolu bağlantısı, şehir ve çevre etkileşimi, metro depo sahası bağlantı yolu, güvenlik, elektromekanik sistemler, altyapı, üstyapı ve hat geometrisi olarak sıralanabilir. Tasarım ölçütleri olarak, metro hattı tasarım ölçütleri, atölye yapıları tasarım ölçütleri, çevresel gürültü ve çevresel titreşim ölçütleri dikkate alınmalıdır. Depo sahasının konumu ve yeri seçilirken, hizmet edeceği metro hatlarına yakın olmasına dikkat edilmelidir. Seçilen arazinin, istenilen tesislerin yerleşimine uygun koşullarda, büyüklükte olması ve topoğrafyasının engebesiz olması gerekir. İşletme için kumanda ve kontrol merkezinin bulunduğu, bütün metro hattı ve depo sahasının denetiminin yapıldığı bir işletme binası tesis edilmelidir. İşletme binası ve tesisleri tasarlanırken, tüm işletme senaryolarına uygun ve elverişli yerleşimler yapılmalıdır. Atölye binası ve bakım hizmetleri, bütün araçlara servis sağlayabilecek kapasiteye göre belirlenir. Çift taraftan girişli atölye binası tasarımı daha çok tercih edilse de, arazinin durumuna göre tek taraftan girişli atölye binası da tasarlanabilir. Metro depo sahasının ana amacı metro araçlarına hizmet vermek olduğu için, araç özelliklerine göre bütün tesisler şekillenir. Araçların statik ve dinamik gabarisi, uzunlukları ve kullanılabildikleri hat geometrisi özelliklerine göre, dolanım hatlarının, atölye hatlarının, park hatlarının ve tesislerin yerleşimi yapılır. Karayolu bağlantıları sayesinde depo sahası çalışanlarının ulaşımı, malzeme temini ve metro araçlarının depo sahasına ulaşımı sağlanabilir. Acil durumlarda karayolunu kullanacak acil durum ekiplerinin araçlarına uygun olarak karayolu tasarımlarının yapılmasına dikkat edilmelidir. Şehir ile uyum içerisinde, gürültü ve titreşimlerin denetim altında tutulduğu, atıkların toplanması ve bertarafı için çevreci tesislerin kurulduğu, kirlenmiş suların arıtıldığı ve çevreci bir drenaj sisteminin bulunduğu bir depo sahası tasarımı yapılarak çevre etkileri azaltılmalıdır. Bağlantı yolu; metro hattı ile depo sahası arasındaki ulaşım güvenilirliğini sağlamalı, bir aksaklık durumunda farklı güzergahlarla ulaşım devam etmelidir. Depo sahasının güvenliği için giriş ve çıkışlar denetim altında tutulmalı, izinsiz girişleri engellemek için duvar ve çitlerle arazinin çevresi korunmalıdır. Can güvenliği için insanların araç hatlarına geçişi sınırlandırılmalıdır. Araçların cer gücünü karşılayacak cer trafo merkezi ve uygun katener sistemleri tasarlanıp, araçları denetlemek ve trafik akışını sağlamak için sinyalizasyon donanımları tesis edilmelidir. Altyapı için uygun malzeme seçilerek, gerekli olan şev ve duvar yerleşimleri yapılmalıdır. Yeraltı suyu ve yağmur suyunun denetimi drenaj sistemi ile sağlanarak zeminin kararlılığı korunmalıdır. Depo sahasının yapısına göre balastlı ya da balastsız üstyapı tipi seçilerek tasarım şekillenir. Yapılar içerisinde bulunan hatlar daha çok balastsız üstyapı tipinde yapılırken, doğal zemin üzerinde bulunan hatlar çoğunlukla balastlı üstyapı tipinde yapılmaktadır. Hat geometrisi, depo sahası yerleşimini en çok etkileyen etken olduğu için, yatay ve düşey geometri tasarımları dikkatle yapılmalıdır. Metro araçlarının özelliklerine uygun ve hizmet kapasitesini düşürmeyen özellikte, yatay ve düşey geometri elemanları ile makaslar belirlenip tasarımlar yapılmalıdır. Tasarımı etkileyen etkenlerin yanı sıra, tasarıma ilişkin belirlenmiş olan ölçütler de göz önünde bulundurulmalıdır. Metro depo sahası hatları; hat tasarım ölçütlerine bakılarak, hat geometrisinde istenen şartları sağlamalıdır. Atölye yapıları tasarım ölçütleri de dikkate alınarak, atölye gereksinimleri ve alanları belirlenir ve atölye tasarımı tamamlanabilir. Metro hatları ve depo sahaları yerleşim yerlerinde bulunduğu için, çevreye verdiği rahatsızlıkları belirli seviyelerin altında tutmak amacıyla, çevresel gürültü ve çevresel titreşim ölçütleri dikkate alınmalıdır. Metro depo sahası tasarımını etkileyen bu etkenler ve ölçütler ışığında, Üsküdar-Ümraniye-Çekmeköy metro hattı depo sahası için ihale dokümanında hazırlanmış olan uygulamaya esas kesin proje tasarımı incelenmiş, eksiklikleri belirlenmiş ve yerine yeni bir ön proje tasarımı hazırlanmıştır. Üsküdar-Ümraniye-Çekmeköy metro hattı depo sahası için topoğrafyası engebeli bir arazi ayrılmıştır. Hat, İstanbul’un yoğun yerleşim bölgesinde planlandığı için, depo sahasının yapılabileceği uygun bir arazi bulmak zordur. Kamulaştırma bedellerinin yüksek olması ve kamulaştırmalara karşı açılan davaların uzun yıllar boyunca sürmesi de göz önünde bulundurulduğunda, elde olan arazinin kullanılmasına karar verilmiştir. Daha etkili ve verimli bir şekilde arazi kullanımı sağlamak amacıyla, 110 m ve 120 m olmak üzere iki ayrı kotta, kademeli bir şekilde depo sahası tasarımları yapılmıştır. Tam otomatik sürücüsüz sistem ile işletim için, gerekli kumanda ve kontrol merkezi, sinyal sistemi ve hat tasarımı ile depo sahası tasarımları düzenlenmiştir. Atölye bakım hatları ve atölye binası içindeki teknik alanlar, ilgili ölçütler dikkate alınarak yeniden tasarlanmış, ortaya daha büyük ve yüksek kapasiteli bir atölye tesisi çıkmıştır. Araç park hatlarının sayısı 33’ten 68’e çıkarılmıştır. Alınacak araçlar belirlenerek, araç özellikleri tasarımlarda göz önüne alınmıştır. Depo sahasını kullanan metro hatlarının girişleri birbirinden ayrılarak, işletme açısından ortaya çıkabilecek karışıklıkların ve oluşabilecek araç trafiğinin önüne geçilmiştir. İtfaiye araçlarının ve büyük tırların kullanımına uygun, depo sahası içerisindeki bütün tesislerin ulaşımını sağlayan karayolu bağlantıları yapılmıştır. Tam otomatik sürücüsüz sistemde güvenlik sorunları çıkaracak hemzemin geçişler kaldırılmış, yalnızca araçların elle kumanda edildiği atölye girişlerinde hemzemin geçişler konulmuştur. Gürültü ve titreşim azaltıcı çözümler getirilmiş, çevreci bir drenaj ve atık kaldırma sistemleri tasarlanmıştır. Metro hatları ile depo sahası arasındaki ulaşım güvenilirliğini sağlayacak, farklı güzergahlarla ulaşım sağlayabilen bağlantı yolları tasarlanmıştır. 800 m uzunluktaki test hattı bağlantı yolu üzerine yerleştirilmiştir. Tesisin güvenliği için yüksek duvar ve tel çitler konulup, kameralarla denetim sağlayabilecek tasarımlar sunulmuş, can güvenliği için hatlara insan erişimini engelleyecek tel çitler yerleştirilmiştir. Araçlara cer gücünü sağlayacak trafo merkezi ve rijit katener sistemi hazırlanmış, elektrik kesintisinde hizmete girecek bir kojeneratör sistemi tasarımlara eklenmiştir. UIC 54 (54 E 1) tipi ray ve ön germeli beton travers ile balastlı üstyapı sistemi kurularak depo sahası yerleşimleri yapılmıştır. Atölye binası içindeki bakım hatları için, betona gömülü oluklu ray ile balastsız üstyapı sistemi seçilmiş ve iki katlı park hatları binasının alt katındaki park hatlar için, betona sabit balastsız üstyapı sistemi seçilmiştir. Hat geometrileri tasarlanırken, arazi koşulları nedeniyle düşey geometri ölçütleri aşılmak zorunda kalınmıştır. Çekici araçların bu düşey geometri koşullarına uyumlu olması ve yeterli güce sahip olması durumunda, ortaya çıkabilecek olumsuzlukların önüne geçilebilir. En küçük yatay kurp yarıçapı 80 m, en küçük düşey kurp yarıçapı 2000 m, en büyük eğim %4 ve makas tipi 1/7 R 140 seçilerek tasarımlar yapılmıştır. Metro depo sahası tasarımları yapılırken, işletmenin gereksinimleri, araç özellikleri önceden bilinmeli ve tasarım ona göre şekillenmelidir. Daha verimli olan tam otomatik sürücüsüz sistem tercih edilmelidir. Depo sahasında hız ve konforun düşük olması ve yerleşim bölgesinde uygun arazi yapısı olan bir alanın bulunmasının zor olması göz önünde bulundurularak, hat geometrisi ölçütleri ve standartları konusunda daha esnek olunmalıdır. Metro depot area is needed to include operating, cleaning, maintenance and repair, overhaul, material requisition and parking areas for vehicles. Designing these facilities, many factors and criteria have to be taken into account. First of all, Istanbul metro lines and their depot areas are mentioned in this thesis study. Then designing factors and criteria for a metro depot area are highlighted. Afterwards, final design project in the contract of Istanbul Uskudar-Umraniye-Cekmekoy metro line is being analyzed and a new conceptual design project for metro depot area is being developed. Finally, by taking into consideration of the results indicated, new suggestions and aspects about metro depot design are being made. Factors for designing metro depot area are; location and site selection, operation, workshop and maintenance services, parking tracks, vehicle features, rood connection, city and environment interaction, access tracks, security, electromechanical systems, infrastructure, superstructure and track geometry parameters. Criterion of track design, criterion of workshop design and criterion of environmental noise and vibration are needed to be taken in consideration as design criterions. Metro depot area is needed to be close to the metro lines which are being connected. The area is needed to be appropriate and big enough for the selected facilities, and smooth terrain are better to establish the facilities. Operation building and facilities are being designed and areas are being selected which are appropriate and sufficient for entire operational scenarios and have control center. Requests of operator firm are being considered in the name of not having trouble during operation. The capacity of workshop and maintenance services is determined regarding to the serving to metro vehicles. Double entry workshop is generally being preferred. However, single entry workshop may be designed according to the field situation. As the main purpose of a metro depot area is serving to metro vehicles, the facilities are designed according to properties of metro vehicles. Settlement of the tracks, workshop and the other facilities are being done accordingly static and dynamic gauge, length of the vehicles and properties of appropriate track geometry. Proper highway connections are needed for the transportation of workers, materials and metro vehicles. Rood design is necessary in the state of emergency for the emergency response vehicles using the roods. In concordance with city, controlling over the noise and vibration are required by designing of depot area. Environmental impacts are being reduced by compatibility with city and environmental, keeping under control environmental noise and vibration, storage and disposal of wastes, treatment of waste water and ecological drainage systems. Access tracks provides security between metro line and depot area and in case of trouble it should be maintained the transportation with different routes. For the security of depot area, entry and exit points are needed to be controlled and protected with hedges and walls against intrusions. Access of people to track corridors should be limited for security of life. Traction transformer and appropriate catenary systems are being designed to meet the traction force of vehicles. Necessary facilities for signage systems are being established on behalf of controlling the vehicles and traffic stream. Required side slopes and retaining walls settlements are being done by selecting the proper material for infrastructure. Infrastructure design is needed to be developed by providing drainage system to control groundwater and storm water. The stability of soil could be provided by means of drainage system. Design is being shaped by selecting ballasted track or ballastless track according to the configuration of depot area. Generally, tracks in building are ballastless and tracks on soil are ballasted. Track geometry is the main factor on settlement of a depot area. Tracks are being settled by horizontal and vertical geometry design and selection of turnout geometry which are appropriate for depot area. These geometries are needed to be appropriate for vehicles and nonrestrictive for the capacity of metro depot area. Beside of these factors, regarding design criterions is required to be considered. Preferred conditions on track geometry are being provided thereby the design criterions of track geometry. Design of workshop can be completed by determining the necessity and area of workshop considering workshop design criterions. To keep under control environmental disturbance, environmental noise and environmental vibration criterions are needed to be considered. The final design project in the contract of Istanbul Uskudar-Umraniye-Cekmekoy metro line is being analyzed and its deficiencies are being disclosed in the light of design criterions and factors of metro depot. In place of this design, new conceptual design project is being developed. Metro depot area in the project has rugged terrain. Since the metro line is projected on intensive residential area of Istanbul, it is hard to find an appropriate land for depot area. Because of high level of expropriated price and long cases against expropriation, it is decided to continue to work on same land. Therefore, with the purpose of efficiently usage of the land, depot area is being designed by arranging land on two different elevations which are 110m and 120m. Design of the depot area is arranged by control center, signal system and track design for unmanned full-automatic operation system. Capacity of workshop building and depot area is expanded by integrating two workshop building in different areas. Daily cleaning services are taken to parking tracks. Number of vehicle parking lines is increased from 33 to 68. New design project is shaped regarding to properties of metro vehicles. Depot area entrance of subway lines is being separated for the purpose of preventing disorder and potential vehicle traffic. A new road design is being developed for the usage of fire trucks and trailer trucks. All facilities are connected with road. Level crossings are settled only at the entrances of workshop which vehicles controlled manually to avoid safety problems on unmanned full-automatic operation system. Ecological drainage systems, storage and disposal of wastes and equipment for restriction of environmental noise and vibration are designed. Access roads are planned to provide reliability of transportation between metro lines and depot area and also different routes. 800-meter-long test track is settled on access road. Razor wire and wire fences on high walls and monitor system are designed for the security of properties. For the security of life, wire fences are put to prevent access to tracks. A transformer and rigid catenary system are prepared to provide traction force for vehicles. A cogenerator system is added to design to put into service in case of power cut. Ballasted track system with UIC 54 (54 E 1) type rail and pre-stressed concrete sleeper are selected and settled. In the workshop building, superstructure should be as flange rail embedded in concrete. On ground floor of parking building, superstructure should be as ballastless track. Because of condition of terrain, it is contravened vertical geometry criterions. To prevent problems of this situation, shunting vehicle is needed to be proper to the vertical geometry. The minimum radius of horizontal curve as 80 m, the minimum radius of vertical curve as 2000 m, the maximum slope as 4% and turnout type as 1/7 R 140 are selected then design is prepared. By designing a metro depot area, requirements of the operating firm, properties of vehicles should be known before designing period and design is needed to be shaped accordingly. Unmanned full-automatic operation system should be selected for further efficiency. The speed and comfort in the depot area is restricted, and it is hard to find an appropriate land in urban area. Therefore, flexibility is needed on criterions and standards of track geometry. Yüksek Lisans M.Sc.Abstract
Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2015 Thesis (M.Sc.) -- İstanbul Technical University, Instıtute of Science and Technology, 2015 Metro depo sahasında; araçların park edilmesi, işletilmesi, temizliği, bakım ve onarımı, tamir [...]Abstract
Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2015 Thesis (M.Sc.) -- İstanbul Technical University, Instıtute of Science and Technology, 2015 Ülkemizde özellikle İstanbul başta olmak üzere son yıllarda köylerden kentlere doğru göçlerin olması sebebiyle günlük hayatta ulaşım problemleri görülmektedir. Her geçen gün insanların trafikte geçirdiği zaman artmaktadır. Bu sebeple yerel yönetim yetkilileri kentiçi raylı sistem yatırımlarına verdikleri önemi artırmışlardır. Bu tez çalışması iki kısımdan meydana gelip ilk kısmında yurtdışı örneklerinin de verildiği kentiçi raylı sistem hat bakımlarının planlanmasından ve yönetiminden bahsedilmiş olup ortaya daha somut veriler koymak adına Başakşehir Metro hattı ele alınmıştır. Demiryolu bakım çalışmalarının planlamasının nasıl yapıldığından, sınırlayıcı koşullardan, çakışan bakımların ötelenmesinden bahsedilmiştir. Tezde ele alınan tüm bakımlar, lokasyonlar ve sayısal veriler tamamen somut veriler olup şahsım tarafından hazırlanmıştır ve halen aynı bakım planlaması üzerinden hat bakım çalışmaları gerçekleştirilmektedir. 2 yılı planlı olmak üzere 3 yıldır hat bakımlarının yapıldığı Başakşehir metro hattında başarılı bir planlama neticesinde bakımların aksamadan ve özenle yapılması sayesinde yolculara güvenli ve konforlu hizmet verilmektedir. Ayrıca planlı bakımlar hattın ekonomik ömrünü de uzatmaktadır. Tez çalışmamızın ikinci kısmında ise kentiçi raylı sistemlerin hat bakım çalışmaları neticesinde ortaya çıkabilecek tehlike ve risklere karşı alınması gereken tedbirlerden bahsedilmiştir. Bu tedbirleri belirlerken bütün bakım çalışmaları tek tek ele alınmış olup her biri ile ortaya çıkabilecek riskler ve mevcut tedbirler gözönünde bulundurulmuştur. Risk değerlendirmesi yaparken Fine-Kinney methodu kullanılmıştır. Risk değerlendirmesi sonucu sürdürülecek tedbir çalışmaları için yetkili personeller belirlenmiştir. Bakım çalışmalarında olduğu gibi risk değerlendirmesi sonucu ortaya çıkan sonuç raporu da halen Başakşehir Metro Hattında aktif olarak kullanılmaktadır. Üzerinde çalışılan risk değerlendirmesi ile kentiçi raylı sistemler hat bakım çalışmalarında yaşanabilecek kaza oranını minimuma indirgemek hedeflenmektedir. In our country especillay in Istanbul there have been some transport problems in daily life in recent years due to the migration from villages to cities. The time that people spend in traffic has been increasing day by day. Therefore, the local government officials have increased the importance which they give to investment in urban railway system. Because urban railway systems are more ecological, safer and more comfortable than the other public trasnports. Also people can go anywhere they want just in time as it has no relation to traffic. Now, there are 4 metro lines and 2 tram lines in İstanbul and their total length is 120 km. On the other hand 2 new metro lines’ construction continue. And also many metro lines’ projects have being designed. Aim for the year 2023, total urban railway systems lenght is 630 km in İstanbul. If it will be accomplished, İstanbul is going to have one of the longest urban railway system all over the world. By the way, the number of passengers will increase 5-6 times. In this thesis, which consists of two parts in which in the first part planning of urban railway system maintenance and management have been mentioned with the examples from overseas, Başakşehir Metro Line has been studied in order to put some concrete data. And also mentioned that how it made the planning of rail maintenance work, what are the limiting conditions, how it made the displacement of maintenance works. All maintenance, locations and quantitive datas discussed in the thesis are completely concrete and prepared by myself and also track maintenance work has still been carried out on the same planning of maintenance. For a better understanding of track maintenance planning, the management, station and tunnel structures and the connection systems, superstructure and geometric features of Başakşehir Metro Line have been mentioned primarily making the definition of tram, light rail transit and metro. In order to make a planning of urban railway system, a wide knowledge of line maintenance is required. While making a planning of maintenance, the maintenance time, maintenance intervals, the number of employees needed for this maintenance work and how many people are in need for how many hours are determined. Afterwards, the capacity of man-hour in one-week period that the mainteance unit has is determined and the maintenance planning is made beginning with the shortest period one. The longer maintenance period which coincides with another maintenance in the same week is made one week before or after. How to use some maintenace equipments and the analysis of them on computer environment has been also mentioned while mentioning about the methods of maintenance. Especially emphasizing the line geometric measuring devices, how to interpret the graphics has been mentioned. The reason why we emphasize this device is that thanks to this device we can see lots of measurement which can be made with hands on computer environment at the same time. As a result of good planning, safe and comfortable service has been offered to passengers for 3 years-2 years of planned- thanks to regular and careful maintenance on Başakşehir Metro Line. Also planned maintenance prolong the economic life of track. On the other hand, poor lines increases the cost of management distrupting the profile of trains' wheel. In the second part of the thesis, some precautions that must be taken against probable danger and risks that may occur as a result of urban railway systems maintenance work have been issued. All maintenance work in determininng these measures have been discussed individually with each of the risks that may arise and measures that have been taken into account. While assesing risk, other risk assesment methods such as Matris, FMEA, FTA, ETA, HAZOP have been mentioned and Fine-Kenney method has been used. The reason why we've used Finne-Kinney method is that many line maintenance works have been made in different periods and every maintenance work has different timetable. Not only mainteance works must be done by experts but also risk assesment must be done by experts. For this reason, foreign service recruitment for the risk assesment of line maintenace is not appropriate. Providing the service of Kartal-Kadıköy Metro Line in 2013 and Başakşehir Metro Line in 2014, there has been increase in the number of work accidents in urban railway system in Istanbul. However, as a result of effective occupational health and safety studies applied in Başakşehir Metro Line, the increase in the number of work accident in maintenance unit has been prevented. This result has been got in the light of the past and current data of work accidents. In 2014, there has been only one work accident in Başakşehir Metro Line. Just as in the maintenance work, the final report in consequence of risk assesment has still been used actively on Başakşehir Metro Line. This risk assessment which is about the maintenance works in urban railwasy systems aims to mimimize the accident rate. Yüksek Lisans M.Sc.Abstract
Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2015 Thesis (M.Sc.) -- İstanbul Technical University, Instıtute of Science and Technology, 2015 Ülkemizde özellikle İstanbul başta olmak üzere son yıllarda köylerden kentlere doğru göçlerin [...]