Abstract

Earthquake loss estimation systems in the US, for example HAZUS (Hazard in US), have been established based on sufficient damage records for the purpose of prevention and efficient response to earthquake hazards; however, in Korea, insufficient data sets of earthquakes and damage records are currently available. In this study, the earthquake damages to pipelines in Korea using the pipeline repair rate (RR) recommended in HAZUS was reevaluated with the degree of confidence when RR is used without modification for the damage estimation of pipelines in Korea. The numerical analyses using a commercial finite element model, ABAQUS, were carried out to compare stresses and strains mobilized in both brittle and ductile pipelines constructed by the design criteria and construction specifications of both Korea and the US. These pipelines were embedded in dense sand overlying three different in situ soils (clay, sand, and gravel) subjected to earthquake excitations with peak ground accelerations (PGAs) of 0.2 to 1.2 g and 1994 Northridge and 1999 Chi-Chi earthquake loadings. The numerical results show that differences in the stress and strain rates are less than 10%. This implies that RR in HAZUS can be used for earthquake damage estimation of pipelines with a 90% confidence level in Korea. Document type: Article

Abstract

Abstract. In addition to CO2, the climate impact of aviation is strongly influenced by non-CO2 emissions, such as nitrogen oxides, influencing ozone and methane, and water vapour, which can lead to the formation of persistent contrails in ice-supersaturated regions. Because these non-CO2 emission effects are characterised by a short lifetime, their climate impact largely depends on emission location and time; that is to say, emissions in certain locations (or times) can lead to a greater climate impact (even on the global average) than the same emission in other locations (or times). Avoiding these climate-sensitive regions might thus be beneficial to climate. Here, we describe a modelling chain for investigating this climate impact mitigation option. This modelling chain forms a multi-step modelling approach, starting with the simulation of the fate of emissions released at a certain location and time (time-region grid points). This is performed with the chemistry–climate model EMAC, extended via the two submodels AIRTRAC (V1.0) and CONTRAIL (V1.0), which describe the contribution of emissions to the composition of the atmosphere and to contrail formation, respectively. The impact of emissions from the large number of time-region grid points is efficiently calculated by applying a Lagrangian scheme. EMAC also includes the calculation of radiative impacts, which are, in a second step, the input to climate metric formulas describing the global climate impact of the emission at each time-region grid point. The result of the modelling chain comprises a four-dimensional data set in space and time, which we call climate cost functions and which describes the global climate impact of an emission at each grid point and each point in time. In a third step, these climate cost functions are used in an air traffic simulator (SAAM) coupled to an emission tool (AEM) to optimise aircraft trajectories for the North Atlantic region. Here, we describe the details of this new modelling approach and show some example results. A number of sensitivity analyses are performed to motivate the settings of individual parameters. A stepwise sanity check of the results of the modelling chain is undertaken to demonstrate the plausibility of the climate cost functions. Document type: Article

Abstract

Abstract. Due to their widespread and continuous expansion, transportation networks are considerably exposed to natural hazards such as earthquakes, floods, landslides or hurricanes. The vulnerability of specific segments and structures among bridges, tunnels, pumps or storage tanks can translate not only into direct losses but also into significant indirect losses at the systemic level. Cascading effects such as post-event traffic congestion, building debris or tsunamis can contribute to an even greater level of risk. To support the effort of modeling the natural hazards' implications at the full transportation network scale, we developed a new applicable framework, relying on (i) GIS to define, analyze and represent transportation networks; (ii) methods for determining the probability of network segments to fail due to natural-hazard effects; (iii) Monte Carlo simulation for multiple scenario generation; (iv) methods to analyze the implications of connectivity loss on emergency intervention times and transit disruption; and (v) correlations with other vulnerability and risk indicators. Currently, the framework is integrated into ArcGIS Desktop as a toolbox entitled “Network-risk”, which makes use of the ModelBuilder functions and is free to download and modify. Network-risk is an attempt to bring together interdisciplinary research with the goal of creating an automated solution to deliver insights on how a transportation network can be affected by natural hazards, directly and indirectly, assisting in risk evaluation and mitigation planning. In this article we present and test Network-risk at the full urban scale for the road network of Bucharest. This city is one of Europe's most exposed capitals to earthquakes, with high seismic-hazard values and a vulnerable building stock but also significant traffic congestion problems not yet accounted for in risk analyses and risk reduction strategies. Document type: Article