Increasing the number of subcells in a multijunction or “spectrum splitting” photovoltaic improves efficiency under the standard AM1.5D design spectrum, but it can lower efficiency under spectra that differ from the standard if the subcells are connected electrically in series. Using atmospheric data and the SMARTS multiple scattering and absorption model, we simulated sunny day spectra over 1 year for five locations in the United States and determined the annual energy production of spectrum splitting ensembles with 2–20 subcells connected electrically in series or independently. While electrically independent subcells have a small efficiency advantage over series-connected ensembles under the AM1.5D design spectrum, they have a pronounced energy production advantage under realistic spectra over 1 year. Simulated energy production increased with subcell number for the electrically independent ensembles, but it peaked at 8–10 subcells for those connected in series. Electrically independent ensembles with 20 subcells produce up to 27% more energy annually than the series-connected 20-subcell ensemble. This energy production advantage persists when clouds are accounted for.
Abstract
Increasing the number of subcells in a multijunction or “spectrum splitting” photovoltaic improves efficiency under the standard AM1.5D design spectrum, but it can lower efficiency under spectra that differ from the standard if the subcells are connected electrically in series. [...]
eaports’ energy strategy should rely on the use of renewable energy. Presently, the share of renewable energy used by many of the ports worldwide is negligible. Some initiatives are in the process of implementation to produce some of the energy used by the Port of Valencia, one the largest ports in the Mediterranean Basin. Among these initiatives, a photovoltaic plant with an installed capacity of 5.5 MW is under a tendering process and the assessment studies for the deployment of three to five windmills are close to being finished. However, this is not enough to make it a “zero emissions port” as some of the energy demand would still be covered by fossil fuels. Therefore, we should consider clean alternative energy sources. This article analyses the wave energy resources in the surroundings of the Port of Valencia using a 7-year series of data obtained from numerical modelling (forecast). The spatial distribution of wave power is analysed using data from 3 SIMAR points at Valencia Bay and is compared to the data obtained by the Valencia Buoy I (removed in 2005). The obtained results are used to estimate the power matrices and the average energy output of two wave energy converters suitable to be integrated into the port’s infrastructure. Finally, the wave energy converters’ production is compared to the average amount of energy that is forecast to be obtained from other renewable sources such as solar and wind. Due to the nature of the Gulf’s wave climate (mostly low waves), the main conclusion is that the energy obtainable from the waves in the Valencia Gulf will be in correlation with such climate. However, when dealing with great energy consumers every source of production is worthwhile and further research is needed to optimize the production of energy from renewable sources and its use in an industrial environment such as ports.
Abstract
eaports’ energy strategy should rely on the use of renewable energy. Presently, the share of renewable energy used by many of the ports worldwide is negligible. Some initiatives are in the process of implementation to produce some of the energy used by the Port of Valencia, [...]
Energy production advantage of independent subcell connection for multijunction photovoltaics 
