Abstract

Epoxy adhesives films were doped by spraying an aqueous dispersion of carbon nanotubes. Sensing capability of carbon fiber reinforced composite coupons with bonded patch repairs was evaluated; several single lap shear and Mode-I fracture energy tests were conducted and their electrical responses were characterized. It was observed that electrical resistance increases with mechanical strain due to tunnelling effect on CNT percolating networks and increases of electrical resistance associated to crack propagations could be also detected. Once the smart behaviour if the adhesive joints was identified by means of mechanical tests in normalized adhesive joined specimens, panels (400 x 400mm) with square co-bonded patches, made using the same curing cycle based on the repaired material one, were prepared using CNT doped adhesive films. These panels were mechanical tested to determine the effect of the doping treatment on the mechanical behaviour of the repairs, at the same time that electric measurements were carried out to identified local failures during testing. Obtained results showed that structural film adhesives could be surface doped with CNT providing sensing capabilities to be used in structural health monitoring of adhesive repairs in composite structures.