Abstract

The stress analysis is presented for the proposed loop seal modification to the LOFT Steam Generator Main Feed Piping. THE SAP IV finite element computer program was used to analyze normal, upset, emergency, and faulted conditions. Results of the analysis indicate that the modified main feed piping system will satisfy all structural adequacy criteria specified in Subarticle NC-3650 of the ASME Boiler and Pressure Vessel Code. Results also show that the isolation snubber configuration, specified in LTR 115-11, will also be adequate for the piping configuration analyzed. Document type: Report

Abstract

The major aspects of this project are proceeding toward completion. Prior to this quarter, design criteria, tentative site selection, facility layout, and preliminary facility cost estimates were completed and issued. Processing of bio-solids was completed, providing material for the pilot operations. Pilot facility design, equipment selection, and modification were completed during the fourth quarter of 2000. Initial pilot facility shakedown was completed. After some unavoidable delays, a suitable representative supply of MSW feed material was procured. During this first quarter of 2001, shredding of the feed material and final feed conditioning were completed. Pilot facility hydrolysis production was completed to produce lignin for co-fire testing and the lignin fuel was washed and dewatered. Both the lignin and bio-solids fuel materials for co-fire testing were sent to the co-fire facility (EERC) for evaluation and co-firing. EERC has received coal typical of the fuel to the TVA-Colbert boilers. This material will be used at EERC as baseline material and for mixing with the bio-fuel for combustion testing. EERC combustion testing of the bio-based fuels is scheduled to begin in October of 2001. The TVA-Colbert facility has neared completion of the task to evaluate co-location of the Masada facility on the operation of the power generation facility. The TVA-Colbert fossil plant is fully capable of providing a reliable steam supply. The preferred steam supply connection points and steam pipeline routing have been identified. The environmental review of the pipeline routing has been completed and no major impacts have been identified. Detailed assessment of steam export impacts on the Colbert boiler system have been completed and a cost estimate for steam supply system was completed. The cost estimate and the output and heat rate impacts will be used to determine a preliminary price for the exported steam. Document type: Report

Abstract

The stress analysis performed on the 1''-PCC-76-A piping system inside containment penetration S-1A is described. Deadweight, thermal expansion, and seismic loads were considered. Results of this analysis show that the subject piping system will meet ASME Boiler and Pressure Vessel Code, Section III, Class 2 requirements provided that supports S8 and S9 are installed as recommended. Document type: Report