Abstract

This work presents the use of limited experimental measurements to develop a set of calibrated simulation parameters that can then be used for reliable simulation of subsea pipeline inspections. The modelling software aRTist is used as the simulation tool, and the calibration is through comparison with experimental images of a well characterised sample in a water tank. Image quality parameters such as signal-to-noise ratio, contrast and basic spatial resolution are compared with the aim of matching simulated values to experimental results. Currently the model is partially calibrated, with signal-to-noise ratio successfully matched while differences are still found in contrast-to-noise ratio comparisons. This means that measurements depending on absolute intensity are not accurate enough in the simulation at this stage. However, the simulation is found to be accurate for wall thickness measurements in tangential images, which are not based on absolute intensity, with simulated and experimental cases producing similar results.


Original document

The different versions of the original document can be found in:

http://scitation.aip.org/content/aip/proceeding/aipcp/10.1063/1.4940575,
https://spiral.imperial.ac.uk/handle/10044/1/32660,
https://opus4.kobv.de/opus4-bam/frontdoor/index/index/docId/37553,
https://academic.microsoft.com/#/detail/2317372753
Back to Top

Document information

Published on 01/01/2015

Volume 2015, 2015
DOI: 10.1063/1.4940575
Licence: CC BY-NC-SA license

Document Score

0

Views 2
Recommendations 0

Share this document

claim authorship

Are you one of the authors of this document?