Abstract

brake system has been widely used in heavy trucks and intercity buses for its great superiority over other brake system. The practical performance of air brake system may be greatly different from if we analyze it with static theory. Thus, it is necessary to build an integrate air brake system model to simulate the process of brake accurately. However, the dynamic mathematic model of air brake system is very complicate, which makes the model hard to be solved. In this paper, the components of air brake system are decomposed to several basic standard pneumatic components, and then build the system based on these basic standard pneumatic components. The standard pneumatic components which are built in the softwareMWorks based on Modelica language include cylinder, nozzle, air reservoir, volume, and air pipe. An air brake system which contains brake valve, relay valve, brake chambers and pipelines is made based on the standard pneumatic components. The simulation results show the dynamic characteristics of air brake system.


Original document

The different versions of the original document can be found in:

http://dx.doi.org/10.3384/ecp11063430
http://www.ep.liu.se/ecp/063/047/ecp11063047.pdf,
https://www.modelica.org/events/modelica2011/Proceedings/pages/papers/17_3_ID_144_a_fv.pdf,
https://academic.microsoft.com/#/detail/2083777980
Back to Top

Document information

Published on 01/01/2011

Volume 2011, 2011
DOI: 10.3384/ecp11063430
Licence: CC BY-NC-SA license

Document Score

0

Views 1
Recommendations 0

Share this document

Keywords

claim authorship

Are you one of the authors of this document?