Due to external interference, pipelines used for onshore as well as offshore operations can present dent and gouge defects. As such defects can seriously impair facilities’ integrity and performance, it is necessary to evaluate the strains in the vicinity of these defects. The development of non-destructive approaches to assess defects severity remains an issue in the pipeline industry. In the present study, micro-hardness - strain relationships are established for three steel grades of pipeline materials: API X52 modern, API X52 vintage and API X63 vintage. The micro-hardness – strain correlations of the three pipe materials are analyzed in order to verify if they can be described by a master curve. For that purpose, Notched Tensile (NT) tests are performed in Longitudinal (L) and Transverse (T) directions for each grade in order to reach high strain values (up to 70%). The relationship proposed by Tabor was improved with the introduction of three new parameters that allow considering actual material behavior.

Original document

The different versions of the original document can be found in:

Back to Top

Document information

Published on 01/01/2018

Volume 2018, 2018
DOI: 10.1115/ipc2018-78547
Licence: CC BY-NC-SA license

Document Score


Views 2
Recommendations 0

Share this document

claim authorship

Are you one of the authors of this document?