Abstract

The corrosion of metals in concrete is a multibillion dollar problem which affects the construction, transportation, and many other industries. While much has been written about the problem, and numerous reports have appeared which discuss how this corrosion can be controlled, little has appeared on the mechanism whereby this corrosion occurs.

It is well known that highway structures corrode, for the most part, due to the influence of deicing salts or marine environments. Relatively little has appeared about the equally severe corrosion problems which occur in buildings and other nonhighway structures. Most of these structures are not exposed to the salts present in highway structures, yet they still corrode.

This paper discusses how all forms of concrete and similar cementitious environments protect embedded metals. It discusses the three protection mechanisms—passive film formation, changes in the conductivity of the electrolyte, and mineral scales—that have been used to explain how corrosion in concrete occurs. It also presents evidence to explain how, and why, corrosion occurs in these structures, even in the absence of deicing salts, marine environments, or other salt sources. Examples are discussed including buildings, marine piers, foundations, and highway structures.

Back to Top

Document information

Published on 01/01/1990

DOI: 10.1520/STP25023S
Licence: CC BY-NC-SA license

Document Score

0

Views 40
Recommendations 0

Share this document

claim authorship

Are you one of the authors of this document?