Abstract

This paper presents a dual sampling technique for analog-to-digital converters (ADCs) to convert multi-carrier signals more efficiently and proposes an 11b switched-capacitor pipeline ADC based on this technique. With the dual sampling technique, the input signal power of the ADC can be boosted without getting excessive clipping noise and the ADC can have a higher resolution over the critical low amplitude region. Hence the overall signal to thermal, quantization and clipping noise ratio is improved. The 11b pipeline ADC with the proposed technique achieves a wide input signal range of 2Vppd using a single 1.2V supply. Simulations show an improvement of about 5dB in SNDR and better than 10dB in MTPR compared to a conventional 11b ADC for converting multi-carrier signals.


Original document

The different versions of the original document can be found in:

http://dx.doi.org/10.1109/iscas.2011.5937550
http://yadda.icm.edu.pl/yadda/element/bwmeta1.element.ieee-000005937550,
https://www.narcis.nl/publication/RecordID/oai%3Apure.tue.nl%3Apublications%2F54eda33e-22bd-4ec4-98e3-dbef3dbb67ac,
https://pure.tue.nl/ws/files/3141549/Metis246894.pdf,
http://alexandria.tue.nl/openaccess/Metis246894.pdf,
https://research.tue.nl/en/publications/an-11b-pipeline-adc-with-dual-sampling-technique-for-converting-m,
https://tue-staging.elsevierpure.com/en/publications/an-11b-pipeline-adc-with-dual-sampling-technique-for-converting-m,
https://academic.microsoft.com/#/detail/2105763039
Back to Top

Document information

Published on 01/01/2010

Volume 2010, 2010
DOI: 10.1109/iscas.2011.5937550
Licence: CC BY-NC-SA license

Document Score

0

Views 0
Recommendations 0

Share this document

Keywords

claim authorship

Are you one of the authors of this document?