Abstract

O trabalho mostra os resultados de uma série de medições de desempenho propulsivo de um comboio no rio Araguaia, constituído de um empurrador bihélice de potência instalada de 448kW e duas chatas de 530 t de deslocamento cada. O empurrador teve, durante o período de medições, dois tipos de propulsores diferentes: da série B-Troost, mais convencional, e da série Kaplan em dutos. Os resultados de escala real foram analisados fazendo uso, inclusive, de resultados com modelos em tanques de provas, com o objetivo de descobrir os problemas e identificar os melhores procedimentos para o projeto de hélices de embarcações fluviais de cargas. Levando em consideração as características operacionais com alto carregamento das pás dos hélice fluviais, foi proposto um tratamento diferenciado daquele tradicionalmente aplicado em hélices de embarcações marítimas convencionais. Ao final, foi verificado que existem métodos adequados de estimativas de resistências ao avanço de comboios fluviais, mas que existem problemas nas estimativas dos coeficientes propulsivos, o que influencia decisivamente a qualidade dos projetos dos hélices fluviais. Com relação à geometria das pás dos hélices, concluiu-se que os hélices fluviais devem apresentar, em termos gerais, pequenos diâmetros, grandes razões de áreas expandidas, pás mais espessas, especialmente nas pontas, simetria do contorno das pás e ausência de caimento. As análises mostraram, também, as vantagens da utilização de hélices em dutos, assim como constataram que as séries sistemáticas de hélices podem ser utilizadas com pleno êxito em projetos de hélices de embarcações fluviais. This work shows the results of a series of measurements of propulsive performance of a push-tow in the Araguaia river, with a 448kW twin-screw pusher and two 530t barges. During the measurements the pusher was fitted with two different types of propellers: firstly with a more conventional B-Troost one and later with a Kaplan ducted propeller. The full scale results were analyzed by using results of towing tank tests in order to find out the problems and identify the best procedures for the design of propellers of inland vessels. Taking into consideration the operational characteristics of heavily loaded blades of inland vessel propellers, it has been proposed a differentiated treatment compared to that usually applied on conventional marine propellers. At the end, it was verified that there exist good methods of estimating push-tow resistances, but there are problems in estimating the propulsive coefficients, and these influence decisively the quality of inland propeller design. Regarding the blades geometry of the propeller, it was concluded that inland propellers should have small diameters, great expanded area ratios, thicker blade sections, especially in the tips, no skew and no rake. The analysis showed, also, the advantages of the ducted-propellers in inland vessels, as well as it verified that the propeller systematical series can be used successfully for the selection of such propellers.


Original document

The different versions of the original document can be found in:

http://dx.doi.org/10.11606/d.3.1997.tde-18122002-164613
http://www.teses.usp.br/teses/disponiveis/3/3135/tde-18122002-164613,
https://academic.microsoft.com/#/detail/1707449186
Back to Top

Document information

Published on 01/01/1997

Volume 1997, 1997
DOI: 10.11606/d.3.1997.tde-18122002-164613
Licence: CC BY-NC-SA license

Document Score

0

Views 0
Recommendations 0

Share this document

claim authorship

Are you one of the authors of this document?