Abstract

The fiber reinforcement efficiency of carbon fiber reinforced cement matrix composites (CFRCM) is limited by the low permeability of mortar to internal filaments in the fibers, leading to premature failure of the composites due to low bond strength. In this paper, three kinds of nano-silica materials were used to improve the bond properties of carbon fiber bundles to cement-based matrix by coating and electrophoretic deposition. It is found that different methods have different positive or negative effects on the improvement of bond properties, and the effects are different under different embedded lengths. The modification principle is due to the high impregnation of nano silica particles on the fibers and the reaction of volcanic ash of the particles, which promotes the formation of calcium silicate hydrate gel inside the fibers. Relevant research needs further exploration.

Full Paper

The PDF file did not load properly or your web browser does not support viewing PDF files. Download directly to your device: Download PDF document
Back to Top

Document information

Published on 03/10/23
Submitted on 03/10/23

DOI: 10.23967/c.dbmc.2023.013
Licence: CC BY-NC-SA license

Document Score

0

Views 4
Recommendations 0

Share this document

claim authorship

Are you one of the authors of this document?