Model-Based System Testing (MBST) combines physical testing and simulation models to enable the validation of complex systems early-on in their design cycle. Therefore, it shows great potential for the validation of increasingly complex Electric Vehicle (EV) powertrains. In this work, the MBST methodology is applied to a downscaled powertrain, including a Permanent-Magnet Synchronous Machine (PMSM) and a 3-phase switch-mode inverter. This System-under-Test (SuT) is integrated into an X-in-the-Loop (XiL) test bench, where real-time simulation models of the rest of the vehicle are used to impose realistic boundary conditions to the SuT. These include the emulation of the vehicle inertia, its friction losses and the regenerative braking controller. Both hardware and software architectures required to achieve this setup are presented. Subsequently, a methodology used for computing scaling factors that match the power levels of the full vehicle to the miniature test bench is proposed. Finally, the combined physical-virtual system is evaluated on a driving cycle to validate its behaviour. The usage of a downscaled SuT constitutes the first step towards full-scale E-powertrain-in-the-loop testing, as well as a valuable multi-purpose didactical XiL setup.


Original document

The different versions of the original document can be found in:

Back to Top

Document information

Published on 01/01/2020

Volume 2020, 2020
DOI: 10.5220/0009887405940603
Licence: Other

Document Score


Views 6
Recommendations 0

Share this document

claim authorship

Are you one of the authors of this document?