Summary

This work describes the cooperative/competitive design process that led to the definition of the Krueger flap to be used in the numerical and experimental tests of the European project UHURA. The project requirements are particularly challenging because it is necessary to develop a device with good aerodynamic high-lift characteristics, but it is necessary to consider many constraints of structural and kinematic nature. Indeed, the kinematics for its deployment is quite complex and imposes hard constraints on the Krueger shape, and the structural characteristics must allow it to withstand considerable structural stresses in the deployment phase which is studied in the wind tunnel.

Abstract

The PDF file did not load properly or your web browser does not support viewing PDF files. Download directly to your device: Download PDF document

Full Paper

The PDF file did not load properly or your web browser does not support viewing PDF files. Download directly to your device: Download PDF document
Back to Top
GET PDF

Document information

Published on 24/11/22
Accepted on 24/11/22
Submitted on 24/11/22

Volume Computational Solid Mechanics, 2022
DOI: 10.23967/eccomas.2022.159
Licence: CC BY-NC-SA license

Document Score

0

Views 5
Recommendations 0

Share this document

claim authorship

Are you one of the authors of this document?