Abstract

Today, the use of proportional-integral-derivative (PID) control units continues in many control applications due to their simple structure. In areas such as pressure, temperature, flow control, PID control element is used and many new methods are applied in adjusting control parameters. In this study, the LTR 701 Controlled Airflow and Temperature Experimental System was used to study the temperature and pressure control at different flow rates in the pipelines. In this control system, temperature was controlled with PID control element, pressure was controlled with PI control element, and reaction of control parameters at different temperatures and pressures were investigated. Also, temperature was controlled as cascade with PI element in elementary controller and P element in secondary controller. The manual adjustment method has been applied to adjust the control parameters. In addition, the experimental system is modelled in MATLAB-SIMULINK. On this model, simulation results showed that it is matching the experimental results.

Document type: Article

Full document

The PDF file did not load properly or your web browser does not support viewing PDF files. Download directly to your device: Download PDF document

Original document

The different versions of the original document can be found in:

https://akjournals.com/downloadpdf/journals/1848/11/2/article-p167.xml,
http://dx.doi.org/10.1556/1848.2020.20028
https://akjournals.com/view/journals/1848/11/2/article-p167.xml,
https://academic.microsoft.com/#/detail/3045174537 under the license http://creativecommons.org/licenses/by-nc/4.0/
Back to Top

Document information

Published on 01/01/2020

Volume 2020, 2020
DOI: 10.1556/1848.2020.20028
Licence: Other

Document Score

0

Views 14
Recommendations 0

Share this document

Keywords

claim authorship

Are you one of the authors of this document?