Abstract

The methods and interim results from a testing program to quantify hydrogen effects on mechanical properties of carbon steel pipeline and pipeline weld materials are provided. The scope is carbon steels commonly used for natural gas pipelines in the United States that are candidates for hydrogen service in the hydrogen economy. The mechanical test results will be applied in future analyses to evaluate service life of the pipelines. The results are also envisioned to be part of the bases for construction codes and structural integrity demonstrations for hydrogen service pipeline and vessels. Tensile properties of one type of steel (A106 Grade B) in base metal, welded and heat affected zone conditions were tested at room temperature in air and high pressure (1500 psig) hydrogen. A general reduction in the materials ability to plastically deform was noted in this material when specimens were tested in 1500 psig hydrogen. Furthermore, the primary mode of fracture was changed from ductile rupture in air to cleavage with secondary tearing in hydrogen. The mechanical test program will continue with tests to quantify the fracture behavior in terms of J-R curves for these materials at air and hydrogen pressure conditions.


Original document

The different versions of the original document can be found in:

https://digital.library.unt.edu/ark:/67531/metadc880244/m2/1/high_res_d/895632.pdf,
https://www.osti.gov/servlets/purl/895632,
https://digital.library.unt.edu/ark:/67531/metadc880244,
https://academic.microsoft.com/#/detail/2267016950
Back to Top

Document information

Published on 01/01/2006

Volume 2006, 2006
DOI: 10.2172/895632
Licence: CC BY-NC-SA license

Document Score

0

Views 2
Recommendations 0

Share this document

Keywords

claim authorship

Are you one of the authors of this document?