Operational test report -- Project W-320 cathodic protection systems

Abstract

Washington Administrative Code (WAC) 173-303-640 specifies that corrosion protection must be designed into tank systems that treat or store dangerous wastes. Project W-320, Waste Retrieval Sluicing System (WRSS), utilizes underground encased waste transfer piping between tanks 241-C-106 and 241-AY-102. Corrosion protection is afforded to the encasements of the WRSS waste transfer piping through the application of earthen ionic currents onto the surface of the piping encasements. Cathodic protection is used in conjunction with the protective coatings that are applied upon the WRSS encasement piping. WRSS installed two new two rectifier systems (46 and 47) and modified one rectifier system (31). WAC 173-303-640 specifies that the proper operation of cathodic protection systems must be confirmed within six months after initial installation. The WRSS cathodic protection systems were energized to begin continuous operation on 5/5/98. Sixteen days after the initial steady-state start-up of the WRSS rectifier systems, the operational testing was accomplished with procedure OTP-320-006 Rev/Mod A-0. This operational test report documents the OTP-320-006 results and documents the results of configuration testing of integrated piping and rectifier systems associated with the W-320 cathodic protection systems.

Original document

The different versions of the original document can be found in:

• http://dx.doi.org/10.2172/353316

• https://digital.library.unt.edu/ark:/67531/metadc687700/m2/1/high_res_d/353316.pdf

• https://core.ac.uk/display/71167905,

https://digital.library.unt.edu/ark:/67531/metadc687700/m2/1/high_res_d/353316.pdf,

https://digital.library.unt.edu/ark:/67531/metadc687700,

http://www.osti.gov/scitech/servlets/purl/353316,

https://academic.microsoft.com/#/detail/2152901599