Abstract
The investigation of the process of carburetion in combustion engines is an actual scientific and practical task. The results of the experimental investigations of the fuel jet flow formed by the nozzle through two section series arranged are shown in the presented article. Front speed and fuel mass speed between optical sections in fuel flow were determined by registered optical density of fuel flow for different pressures. The procedure of the determination of speed abilities of the fuel flow gives the preconditions for creating the bench for the determination of fuel sprayers in the work process of manufacturing with the aim of their division into the groups of oneâ€type parameters. Such approach assumes the usage of manufacturing standard that is the sprayer and the fuel pump with the best ability of injection. First Published Online: 27 Oct 2010
Document type: Article
Full document
The URL or file path given does not exist.
Original document
The different versions of the original document can be found in:
- http://journals.vgtu.lt/index.php/Transport/article/view/8320 under the license http://creativecommons.org/licenses/by/4.0
- https://journals.vgtu.lt/index.php/Transport/article/download/8320/7225 under the license cc-by
Document information
Published on 01/01/2005
Volume 2005, 2005
DOI: 10.3846/16484142.2005.9637992
Licence: Other
Share this document
Keywords
claim authorship
Are you one of the authors of this document?