COLLECTIONS

Documents published in Scipedia

• Computation of energy release rate for interfacial crack in orthotropic bimaterials

  S. Bouziane, H. Bouzerd

  Rev. int. métodos numér. cálc. diseño ing. (2021). Vol. 37, (3), 36

  
  

  Abstract

  The interfacial crack in bimaterials is a very interesting problem for composite materials and which has received particular attention from several researchers. In this study, we will propose a numerical modeling of the interfacial crack between two orthotropic materials using a special mixed finite element. For the calculation of the energy release rate, a technique, based on the association of the present mixed finite element with the virtual crack extension method, was used. The numerical model proposed, in this work, was used to study a problem of interfacial crack in bimaterials. Two cases were treated: isotropic and orthotropic bimaterials. The results obtained, using the present element, were compared with the values of the analytical solution and other numerical models found in the literature.

  Abstract
  The interfacial crack in bimaterials is a very interesting problem for composite materials and which has received particular attention from several researchers. In this study, [...]

  • 103
  •  read

• Computation of energy release rate for interfacial crack in orthotropic bimaterials

  S. Bouziane, H. Bouzerd

  Salah Bouziane's personal collection (2020). 1

  
  

  Abstract

  The interfacial crack in bimaterials is a very interesting problem for composite materials and which has received particular attention from several researchers. In this study, we will propose a numerical modeling of the interfacial crack between two orthotropic materials using a special mixed finite element. For the calculation of the energy release rate, a technique, based on the association of the present mixed finite element with the virtual crack extension method, was used. The numerical model proposed, in this work, was used to study a problem of interfacial crack in bimaterials. Two cases were treated: isotropic and orthotropic bimaterials. The results obtained, using the present element, were compared with the values of the analytical solution and other numerical models found in the literature.

  Abstract
  The interfacial crack in bimaterials is a very interesting problem for composite materials and which has received particular attention from several researchers. In this study, [...]

  • 89
  •  read

Articles (Documents not available in Scipedia)

• Computation of energy free ratio for interfacial crack stuck between different isotropic materials by mixed finite element

  Mohamed Guenfoud, Hamoudi Bouzerd, Salah Bouziane

  Academic Journal of Civil Engineering, 37(1), 354-357

• Computation of mode I Strain Energy Release Rate of symmetrical and asymmetrical sandwich structures using mixed finite element

  Amina Mohamed Ben Ali, Salah Bouziane and Hamoudi Bouzerd

  Frattura ed Integrità Strutturale

• Mixed Finite Element for the Analysis of FGM Beams

  Haroune Benmalek, Salah Bouziane and Hamoudi Bouzerd

  International Review of Mechanical Engineering

• Mixed Finite Element Computation of Energy Release Rate in Anisotropic Materials Based on Virtual Crack Closure-Integral Method

  Sami Derouiche, Salah Bouziane and Hamoudi Bouzerd

  Frattura ed Integrità Strutturale

• Energy release rate for kinking crack using mixed finite element

  Bouziane Salah, Bouzerd Hamoudi, Boulares Noureddine and Guenfoud Mohamed

  Structural Engineering and Mechanics, Vol. 50, No. 5 (2014) 665-677

• Mixed finite element for modelling interfaces

  Salah Bouziane, Hamoudi Bouzerd and Mohamed Guenfoud

  European Journal of Computational Mechanics Volume 18, 2009 - Issue 2

Books, book chapters and edited books (Documents not available in Scipedia)

• Mixed Finite Element for Cracked Interface

  Salah Bouziane, Hamoudi Bouzerd and Mohamed Guenfoud

  Damage and Fracture Mechanics pp 591-600