Scope

About PADRI-2017

The main objective of the Open Workshop PADRI2017 (http://congress.cimne.com/padri-2017/frontal/default.asp) is to find candidate flow control technologies and optimization strategies that can minimize shock wave and interference drag in the strut-wing junction region in cruise condition. 

The ECCOMAS Industry Interest Group (IIG) is actively promoting the ECCOMAS Advanced Workshop PADRI. 
The high level objective of this workshop is to strengthen the ECCOMAS industrial group and to develop contact between ECCOMAS and the DGs of the European Commission. 

PADRI2017 proposes a test case reproducing, even at low velocity, a typical shock wave pattern in the region of the junction strut-wing of an aircraft.  In order to simplify the problem, some constraints have been setup, so that the geometrical modifications should be confined to a defined small region around the strut-wing junction, and the objective function is clearly explained in order to ensure computational data results comparisons across all the technology solutions and participants. 
A computational platform will allow all participants to compare on outputs and formats selected by organizers their respective data results installed on a Database with respect to the reference (baseline) and to show the benefit of the chosen flow control technology. 

The workshop intends to contribute to fill the gap between the different technology models and their application. 

Technical Description of the Test Case 

Strut wing test case is based on an unformatted geometry of an aircraft with upper wing, which is supported by a strut. The geometry includes the entire aircraft with tail and empennage, but simplifications can be applied if necessary, discarding the empennage and tail, or considering symmetry. 
The flow conditions are summarized as: Mach 0.72, angle of attack 1º, Reynolds number over length 7.1x106 m-1, cruise altitude 30000ft on an atmosphere ISA+0 with pressure 30089.59 Pa, and temperature 228.71K. 

• Mach= 0.72
• Angle of attack= 1°
• Reynolds/length= 7.1.106m1 
• Altitude= 30000 ft
• Atmosphere= ISA+0
• Pressure= 30089.59 Pa
• Temperature= 228.71 K

The main focus should be put on the region of the strut-wing junction in the mentioned cruise conditions, analyzing the shock wave and the interference drag in this particular region.
The definition of the best flow control device, which helps to diminish the shock and the drag, is the main objective and should be demonstrated through the analysis of the simulation results. 

Conference organized by CIMNE Congress Bureau.

Scope

The objective of Marine 2017 (http://congress.cimne.com/marine2017/frontal/default.asp) is to be a meeting place for researchers developing computational methods and scientists and engineers focusing on challenging applications in marine engineering.

By marine engineering we include applications within the maritime and offshore industry as well as scientific and engineering challenges related to the marine environment.  The conference goal is to make a step forward in the formulation and computational solution of marine engineering problems accounting for all the complex couplings involved in the physical description of the problems.

The conference topics will include: Ship hydrodynamics, Structural analysis of marine structures, Offshore structures, Sea-pipe mechanics, Advances in mechanical methods for marine engineering (new finite element, finite difference, finite volume and boundary element methods, particle methods, meshless methods, etc.), Computational environmental mechanics in marine problems, Algorithms for solving multidisciplinary problems in marine engineering, Marine engineering applications.

The conference is one of the Thematic Conferences of the European Community on Computational Methods in Applied Sciences (ECCOMAS). It is also supported by other scientific organisations in Europe and worldwide including the International Association for Computational Mechanics (IACM).

Conference organized by CIMNE Congress Bureau.

The next edition of this conference will be held in Edinburgh, Scotland, UK, 2 - 4 June, 2021 (https://congress.cimne.com/marine2021/frontal/default.asp)

Scope

The objectives of the XIV International Conference on Computational Plasticity, Fundamentals and Applications (COMPLAS 2017, http://congress.cimne.com/complas2017) are to address both the theoretical bases for the solution of plasticity problems and the numerical algorithms necessary for efficient and robust computer implementation. COMPLAS 2017 aims to act as a forum for practitioners in the field to discuss recent advances and identify future research directions.

COMPLAS 2017 is one of the Thematic Conferences of the European Community on Computational Methods in Applied Sciences (ECCOMAS). It is also an International Association for Computational Mechanics (IACM) Special Interest Conference.

COMPLAS conferences are organized by CIMNE Congress Bureau.

The next edition of this series of conferences (COMPLAS 2019) will be held in Barcelona, Spain, 3-5 September 2019 (https://congress.cimne.com/complas2019)

Scope

Particles 2015 (http://congress.cimne.com/particles2015/frontal/default.asp) will address both the fundamental basis and the applicability of state-of-the-art particle-based computational methods that can be effectively used for solving a variety of problems in engineering and applied sciences.

This collection gathers the plenary lectures presented at PARTICLES 2015, held on 28-30 September 2015, Barcelona, Spain.

PARTICLES is one of the Thematic Conferences of the European Community on Computational Methods in Applied Sciences (ECCOMAS). It is also an International Association for Computational Mechanics (IACM) Special Interest Conference.

Conference organized by CIMNE Congress Bureau.

The next edition of this conference will be held in Barcelona, Spain, 28 - 30 October 2019 (https://congress.cimne.com/particles2019/frontal/default.asp)

Scope

The objectives of COUPLED PROBLEMS 2015 ( http://congress.cimne.com/coupled2015/frontal/default.asp) are to present and discuss state of the art, mathematical models, numerical methods and computational techniques for solving coupling problems of multidisciplinary character in science and engineering. The conference goal is to make step forward in the formulation and solution of real life problems with a multidisciplinary vision, accounting for all the complex couplings involved in the physical description of the problem.

COUPLED VI is one of the Thematic Conferences of the European Community on Computational Methods in Applied Sciences (ECCOMAS). It is also an International Association for Computational Mechanics (IACM) Special Interest Conference.

Conference organized by CIMNE Congress Bureau.

The next edition of this conference (Coupled 2021) will be held in Chia Laguna, South Sardinia, Italy, 13-16 June 2021 (https://congress.cimne.com/Coupled2021/frontal/default.asp) 

Scope

The objectives of the XIII International Conference on Computational Plasticity: Fundamentals and Applications (COMPLAS XIII, http://congress.cimne.com/complas2015/frontal/default.asp) are to address both the theoretical bases for the solution of plasticity problems and the numerical algorithms necessary for efficient and robust computer implementation. COMPLAS XIII aims to act as a forum for practitioners in the field to discuss recent advances and identify future research directions. 

This collection gathers the plenary lectures presented at COMPLASS XIII, held on 1-3 September 2015 at Barcelona, Spain.

COMPLAS XIII is one of the Thematic Conferences of the European Community on Computational Methods in Applied Sciences (ECCOMAS). It is also an International Association for Computational Mechanics (IACM) Special Interest Conference.

Conference organized by CIMNE Congress Bureau.

The next edition of this conference (COMPLAS 2019) will be held in Barcelona, Spain, 3-5 September 2019 (https://congress.cimne.com/complas2019/frontal/)