S. Oller, E. Oñate. Advanced Models for Finite Element Analysis of Composite Materials. (2012) DOI 10.1002/9781118097298.weoc003
E. Comellas, F. Bellomo, S. Oller. A generalized finite-strain damage model for quasi-incompressible hyperelasticity using hybrid formulation. Int. J. Numer. Meth. Engng 105(10) (2015) DOI 10.1002/nme.5118
S. Oller Aramayo, L. Nallim, S. Oller. An Integrated Procedure for the Structural Design of a Composite Rotor-Hydrofoil of a Water Current Turbine (WCT). Appl Compos Mater 20(6) (2013) DOI 10.1007/s10443-013-9332-9
E. Barbero, F. Cosso, X. Martinez. Identification of Fracture Toughness for Discrete Damage Mechanics Analysis of Glass-Epoxy Laminates. Appl Compos Mater 21(4) (2013) DOI 10.1007/s10443-013-9359-y
X. Martinez, S. Oller, E. Barbero. Caracterización de la delaminación en materiales compuestos mediante la teoría de mezclas serie/paralelo. Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería 27(3) DOI 10.1016/j.rimni.2011.07.001
F. Flores, E. Oñate. Un elemento de sólido con una mejora en el comportamiento del corte transversal para el tratamiento de láminas. Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería 27(4) DOI 10.1016/j.rimni.2011.08.005
M. Molina, J. Cruz, S. Oller, A. Barbat, L. Gil. Estudio numérico-experimental de la interfaz hormigón-epoxi-FRP para una estructura reforzada sometida a doble corte. Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería 28(2) DOI 10.1016/j.rimni.2011.11.007
C. Escudero, S. Oller, X. Martinez, A. Barbat. Procedures Based on Composite FEM Technology for the Resolution of Concrete-Framed Structures with Masonry In-Fills: Comparison with Mexican Building Code. J. Eng. Mech. 143(9) DOI 10.1061/(asce)em.1943-7889.0001275
C. Escudero, S. Oller, X. Martinez, A. Barbat, C. Dávalos. Damage Assessment Using Modeling of Large-Scale Confined Masonry Building. J. Eng. Mech. 144(12) DOI 10.1061/(asce)em.1943-7889.0001526
J. Yun, S. Park. Development of Representative Volume Element Homogenization Model for Predicting Transversely Isotropic Elasticity of Lithium-Ion Batteries. 139(4) (2017) DOI 10.1115/1.4036709
J. Bachmann, X. Yi, H. Gong, X. Martinez, G. Bugeda, S. Oller, K. Tserpes, E. Ramon, C. Paris, P. Moreira, Z. Fang, Y. Li, Y. Liu, X. Liu, G. Xian, J. Tong, J. Wei, X. Zhang, J. Zhu, S. Ma, T. Yu. Outlook on ecologically improved composites for aviation interior and secondary structures. CEAS Aeronaut J 9(3) (2018) DOI 10.1007/s13272-018-0298-z
X. Martínez, S. Oller, E. Barbero. Study of Delamination in Composites by Using the Serial/Parallel Mixing Theory and a Damage Formulation. DOI 10.1007/978-1-4020-8584-0_6
S. Hassan, C. Rao, K. Babu. Development of two-phase unit cell: for modeling the deformation and failure response of quasi-brittle composites. Acta Mech 225(12) (2014) DOI 10.1007/s00707-014-1167-4
X. Martinez, S. Oller. Numerical Simulation of Matrix Reinforced Composite Materials Subjected to Compression Loads. Arch Computat Methods Eng 16(4) (2009) DOI 10.1007/s11831-009-9036-3
A. Girão Coelho. Finite Element Guidelines for Simulation of Delamination Dominated Failures in Composite Materials Validated by Case Studies. Arch Computat Methods Eng 23(2) (2015) DOI 10.1007/s11831-015-9144-1
B. Shetty, S. Reddy, R. Mishra. Finite Element Analysis of an Aircraft Wing Leading Edge Made of GLARE Material for Structural Integrity. J Fail. Anal. and Preven. 17(5) (2017) DOI 10.1007/s11668-017-0331-2