m (Scipediacontent moved page Draft Content 104863443 to Nitzel 1978b)
 
Line 3: Line 3:
  
 
The stress analysis performed on the 1''-PCC-76-A piping system inside containment penetration S-1A is described. Deadweight, thermal expansion, and seismic loads were considered. Results of this analysis show that the subject piping system will meet ASME Boiler and Pressure Vessel Code, Section III, Class 2 requirements provided that supports S8 and S9 are installed as recommended.
 
The stress analysis performed on the 1''-PCC-76-A piping system inside containment penetration S-1A is described. Deadweight, thermal expansion, and seismic loads were considered. Results of this analysis show that the subject piping system will meet ASME Boiler and Pressure Vessel Code, Section III, Class 2 requirements provided that supports S8 and S9 are installed as recommended.
 
Document type: Report
 
 
== Full document ==
 
<pdf>Media:Draft_Content_104863443-beopen344-8987-document.pdf</pdf>
 
  
  
Line 18: Line 13:
 
* [https://digital.library.unt.edu/ark:/67531/metadc1105638/m2/1/high_res_d/6303570.pdf https://digital.library.unt.edu/ark:/67531/metadc1105638/m2/1/high_res_d/6303570.pdf]
 
* [https://digital.library.unt.edu/ark:/67531/metadc1105638/m2/1/high_res_d/6303570.pdf https://digital.library.unt.edu/ark:/67531/metadc1105638/m2/1/high_res_d/6303570.pdf]
  
* [https://www.osti.gov/servlets/purl/6303570 https://www.osti.gov/servlets/purl/6303570],[https://academic.microsoft.com/#/detail/150795184 https://academic.microsoft.com/#/detail/150795184]
+
* [http://www.osti.gov/servlets/purl/6303570 http://www.osti.gov/servlets/purl/6303570],
 +
: [https://academic.microsoft.com/#/detail/150795184 https://academic.microsoft.com/#/detail/150795184]

Latest revision as of 13:03, 22 January 2021

Abstract

The stress analysis performed on the 1-PCC-76-A piping system inside containment penetration S-1A is described. Deadweight, thermal expansion, and seismic loads were considered. Results of this analysis show that the subject piping system will meet ASME Boiler and Pressure Vessel Code, Section III, Class 2 requirements provided that supports S8 and S9 are installed as recommended.


Original document

The different versions of the original document can be found in:

https://academic.microsoft.com/#/detail/150795184
Back to Top

Document information

Published on 01/01/1978

Volume 1978, 1978
DOI: 10.2172/6303570
Licence: CC BY-NC-SA license

Document Score

0

Views 0
Recommendations 0

Share this document

claim authorship

Are you one of the authors of this document?