(Created page with " == Abstract == The stress analysis performed on the 1''-PCC-76-A piping system inside containment penetration S-1A is described. Deadweight, thermal expansion, and seismic l...") |
m (Scipediacontent moved page Draft Content 104863443 to Nitzel 1978b) |
(No difference)
| |
Revision as of 13:24, 26 October 2020
Abstract
The stress analysis performed on the 1-PCC-76-A piping system inside containment penetration S-1A is described. Deadweight, thermal expansion, and seismic loads were considered. Results of this analysis show that the subject piping system will meet ASME Boiler and Pressure Vessel Code, Section III, Class 2 requirements provided that supports S8 and S9 are installed as recommended.
Document type: Report
Full document
Original document
The different versions of the original document can be found in:
Back to Top
Document information
Published on 01/01/1978
Volume 1978, 1978
DOI: 10.2172/6303570
Licence: CC BY-NC-SA license
Share this document
Keywords
claim authorship
Are you one of the authors of this document?