Abstract

Most of the equations used to describe the behaviour of continua are of the form:, (9.1) where denote the vector of unknowns, advective and diffusive flux tensors, and source-terms respectively. In the case of compressible gases, we have . (9.2) Here denote the density, pressure, specific total energy, temperature, conductivity and fluid velocity in direction xi respectively. This set of equations is closed by providing an equation of state, e.g., for a polytropic gas:, (9.3 a, b) where , cv are the ratio of specific heats and the specific heat at constant volume respectively. Furthermore, the relationship between the stress tensor Failed to parse (unknown function "\sigmaij"): \sigmaij

and the deformation rate must be supplied. For water and almost all gases, Newton’s hypothesis  (9.4) complemented with Stokes’ hypothesis Failed to parse (syntax error): \lambda = −2\mu 3
(9.5)is an excellent approximation. The compressible Euler equations are obtained by neglecting the viscous fluxes, i.e., setting . The incompressible Euler or Navier-Stokes equations are obtained by assuming that the density is constant and that pressure does not depend on temperature. The Maxwell equations of electromagnetics, the heat conduction equations of solids, and the equations describing elastic solids undergoing small deformation can readily be written in the form given by Equation (9.1).
Back to Top

Document information

Published on 01/01/2012

DOI: 10.1201/b11644-10
Licence: CC BY-NC-SA license

Document Score

0

Views 2
Recommendations 0

Share this document

claim authorship

Are you one of the authors of this document?