(Created page with " == Abstract == The US Department of Energy (DOE) has millions of gallons of radioactive liquid and sludge wastes that must be retrieved from underground storage tanks, trans...") |
|||
| (2 intermediate revisions by the same user not shown) | |||
| Line 2: | Line 2: | ||
== Abstract == | == Abstract == | ||
| − | The US Department of Energy (DOE) has millions of gallons of radioactive liquid and sludge wastes that must be retrieved from underground storage tanks, transferred to treatment facilities, and processed to a final waste form. The wastes will be removed from the current storage tanks by mobilizing the sludge wastes and mixing them with the liquid wastes to create slurries. Each slurry would then be transferred by pipeline to the desired destination. To reduce the risk of plugging a pipeline, the transport properties (e.g., density, suspended solids concentration, viscosity, particle size range) of the slurry should be determined to be within acceptable limits prior to transfer. These properties should also be monitored and controlled within specified limits while the slurry transfer is in progress. The DOE issued a call for proposals for developing on-line instrumentation to measure the transport properties of slurries. In response to the call for proposals, several researchers submitted proposals and were funded to develop slurry monitoring instruments. These newly developed DOE instruments are currently in the prototype stage. Before the instruments were installed in a radioactive application, the DOE wanted to evaluate them under nonradioactive conditions to determine if they were accurate, reliable, and dependable. | + | The US Department of Energy (DOE) has millions of gallons of radioactive liquid and sludge wastes that must be retrieved from underground storage tanks, transferred to treatment facilities, and processed to a final waste form. The wastes will be removed from the current storage tanks by mobilizing the sludge wastes and mixing them with the liquid wastes to create slurries. Each slurry would then be transferred by pipeline to the desired destination. To reduce the risk of plugging a pipeline, the transport properties (e.g., density, suspended solids concentration, viscosity, particle size range) of the slurry should be determined to be within acceptable limits prior to transfer. These properties should also be monitored and controlled within specified limits while the slurry transfer is in progress. The DOE issued a call for proposals for developing on-line instrumentation to measure the transport properties of slurries. In response to the call for proposals, several researchers submitted proposals and were funded to develop slurry monitoring instruments. These newly developed DOE instruments are currently in the prototype stage. Before the instruments were installed in a radioactive application, the DOE wanted to evaluate them under nonradioactive conditions to determine if they were accurate, reliable, and dependable. Themore » goal of this project was to test the performance of the newly developed DOE instruments along with several commercially available instruments. The baseline method for comparison utilized the results from grab-sample analyses.« le |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| Line 18: | Line 13: | ||
* [https://digital.library.unt.edu/ark:/67531/metadc688333/m2/1/high_res_d/296610.pdf https://digital.library.unt.edu/ark:/67531/metadc688333/m2/1/high_res_d/296610.pdf] | * [https://digital.library.unt.edu/ark:/67531/metadc688333/m2/1/high_res_d/296610.pdf https://digital.library.unt.edu/ark:/67531/metadc688333/m2/1/high_res_d/296610.pdf] | ||
| − | * [http://link.springer.com/content/pdf/10.1007/978-1-4899-1543-6_33 http://link.springer.com/content/pdf/10.1007/978-1-4899-1543-6_33],[http://dx.doi.org/10.1007/978-1-4899-1543-6_33 http://dx.doi.org/10.1007/978-1-4899-1543-6_33 | + | * [http://link.springer.com/content/pdf/10.1007/978-1-4899-1543-6_33 http://link.springer.com/content/pdf/10.1007/978-1-4899-1543-6_33], |
| − | + | : [http://dx.doi.org/10.1007/978-1-4899-1543-6_33 http://dx.doi.org/10.1007/978-1-4899-1543-6_33] | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | * [ ] | + | * [https://link.springer.com/chapter/10.1007%2F978-1-4899-1543-6_33 https://link.springer.com/chapter/10.1007%2F978-1-4899-1543-6_33], |
| + | : [https://digital.library.unt.edu/ark:/67531/metadc688333/m2/1/high_res_d/296610.pdf https://digital.library.unt.edu/ark:/67531/metadc688333/m2/1/high_res_d/296610.pdf], | ||
| + | : [https://www.osti.gov/servlets/purl/570147 https://www.osti.gov/servlets/purl/570147], | ||
| + | : [https://trid.trb.org/view.aspx?id=871197 https://trid.trb.org/view.aspx?id=871197], | ||
| + | : [https://core.ac.uk/display/71168066 https://core.ac.uk/display/71168066], | ||
| + | : [https://academic.microsoft.com/#/detail/1519115769 https://academic.microsoft.com/#/detail/1519115769] | ||
| − | DOIS: 10.1007/978-1-4899-1543-6_33 | + | DOIS: 10.2172/296610 10.1007/978-1-4899-1543-6_33 |
Latest revision as of 19:42, 25 January 2021
Abstract
The US Department of Energy (DOE) has millions of gallons of radioactive liquid and sludge wastes that must be retrieved from underground storage tanks, transferred to treatment facilities, and processed to a final waste form. The wastes will be removed from the current storage tanks by mobilizing the sludge wastes and mixing them with the liquid wastes to create slurries. Each slurry would then be transferred by pipeline to the desired destination. To reduce the risk of plugging a pipeline, the transport properties (e.g., density, suspended solids concentration, viscosity, particle size range) of the slurry should be determined to be within acceptable limits prior to transfer. These properties should also be monitored and controlled within specified limits while the slurry transfer is in progress. The DOE issued a call for proposals for developing on-line instrumentation to measure the transport properties of slurries. In response to the call for proposals, several researchers submitted proposals and were funded to develop slurry monitoring instruments. These newly developed DOE instruments are currently in the prototype stage. Before the instruments were installed in a radioactive application, the DOE wanted to evaluate them under nonradioactive conditions to determine if they were accurate, reliable, and dependable. Themore » goal of this project was to test the performance of the newly developed DOE instruments along with several commercially available instruments. The baseline method for comparison utilized the results from grab-sample analyses.« le
Original document
The different versions of the original document can be found in:
- https://digital.library.unt.edu/ark:/67531/metadc688333/m2/1/high_res_d/296610.pdf,
- https://www.osti.gov/servlets/purl/570147,
- https://trid.trb.org/view.aspx?id=871197,
- https://core.ac.uk/display/71168066,
- https://academic.microsoft.com/#/detail/1519115769
DOIS: 10.2172/296610 10.1007/978-1-4899-1543-6_33
Document information
Published on 01/01/1998
Volume 1998, 1998
DOI: 10.1007/978-1-4899-1543-6_33
Licence: CC BY-NC-SA license
Share this document
Keywords
claim authorship
Are you one of the authors of this document?