(Created page with " == Abstract == Path Computation Element (PCE) can compute Traffic Engineering (TE) paths through a network that are subject to various constraints. Currently, TE paths are...") |
m (Scipediacontent moved page Draft Content 303604766 to Hardwick et al 2018a) |
(No difference)
| |
Latest revision as of 18:30, 25 January 2021
Abstract
Path Computation Element (PCE) can compute Traffic Engineering (TE) paths through a network that are subject to various constraints. Currently, TE paths are Label Switched Paths (LSPs) which are set up using the RSVP-TE signaling protocol. However, other TE path setup methods are possible within the PCE architecture. This document proposes an extension to the PCE communication protocol (PCEP) to allow support for different path setup methods over a given PCEP session.
Original document
The different versions of the original document can be found in:
Back to Top
Document information
Published on 01/01/2018
Volume 2018, 2018
DOI: 10.17487/rfc8408
Licence: CC BY-NC-SA license
Share this document
Keywords
claim authorship
Are you one of the authors of this document?