E. Crespo, F. Carvajal, C. Astudillo, M. Orellana, R. Vintimilla, J. Carvallo
Information security is a growing concern in companies and organizations, being even higher when linked to financial platforms where sensitive information exists. This article explains the techniques used in the pentesting performed on the ERP software developed in APEX 5 by the University of Azuay. To achieve this goal, six stages has been considered for perform a penetration test: I) Conceptualization, where is defined the scope of the tests to be performed. II) Preparation of the laboratory, which identifies some of the tools used to initiate the safety tests. III) Obtaining of information, where the possible objects are recognized and scanned in greater depth to identify intrinsic characteristics for subsequently exploit them. IV) Analysis of the vulnerabilities found in the previous stage. V) Exploitation of vulnerabilities; and VI) post-exploitation, a stage that contemplates the destruction of evidence of the attack and the conservation of the connection and the accesses obtained to extract information. All these stages were carried out within the facilities of the “Universidad del Azuay”, considering the development environment in which this software is currently located.
Diff selection: Mark the radio boxes of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.
Published on 01/01/2018
Volume 9, Issue 1, 2018DOI: 10.29019/enfoqueute.v9n1.253Licence: CC BY-NC-SA license
Views 2Recommendations 0
Are you one of the authors of this document?