A. Coppola-Owen, R. Codina. A finite element model for free surface flows on fixed meshes. Int. J. Numer. Meth. Fluids 54(10) (2007) DOI 10.1002/fld.1412
H. Coppola-Owen, R. Codina. A free surface finite element model for low Froude number mould filling problems on fixed meshes. Int. J. Numer. Meth. Fluids 66(7) (2010) DOI 10.1002/fld.2286
R. Codina, O. Soto. A numerical model to track two-fluid interfaces based on a stabilized finite element method and the level set technique. Int. J. Numer. Meth. Fluids 40(1-2) (2002) DOI 10.1002/fld.277
V. Maronnier, M. Picasso, J. Rappaz. Numerical simulation of three-dimensional free surface flows. Int. J. Numer. Meth. Fluids 42(7) (2003) DOI 10.1002/fld.532
A. Coppola-Owen, R. Codina. Improving Eulerian two-phase flow finite element approximation with discontinuous gradient pressure shape functions. Int. J. Numer. Meth. Fluids 49(12) (2005) DOI 10.1002/fld.963
K. Ravindran, R. Lewis, S. Navti. Effect of Reynolds number on the simulated filling pattern of a bench mark mould filling problem. International Journal of Cast Metals Research 10(5) (2016) DOI 10.1080/13640461.1998.11819244
W. Pao, X. Chen, L. Chao. Optimization of Insulation Padding for Directional Solidification. J. of Applied Sciences 13(2) DOI 10.3923/jas.2013.321.325
A. Caboussat. Numerical simulation of two-phase free surface flows. Arch. Comput. Meth. Engng. 12(2) DOI 10.1007/bf03044518
A. Abda, M. Hassine, M. Jaoua, M. Masmoudi. Topological Sensitivity Analysis for the Location of Small Cavities in Stokes Flow. SIAM J. Control Optim. 48(5) DOI 10.1137/070704332
J. Mackerle. Finite-element analysis and simulation of polymers: a bibliography (1976 - 1996). Modelling Simul. Mater. Sci. Eng. 5(6) (1999) DOI 10.1088/0965-0393/5/6/006
E. Oñate, J. García-Espinosa, S. Idelsohn, B. Serván-Camas. Ship Hydrodynamics. (2017) DOI 10.1002/9781119176817.ecm2070
G. Houzeaux, R. Codina. Finite element modeling of the lost foam casting process tackling back‐pressure effects. Int Jnl of Num Meth for HFF 16(5) DOI 10.1108/09615530610669111
K. Estacio, G. Carey, N. Mangiavacchi. An unstructured CVFEM and moving interface algorithm for non‐Newtonian Hele‐Shaw flows in injection molding. Int Jnl of Num Meth for HFF 20(6) DOI 10.1108/09615531011056836
S. Navti, R. Lewis, C. Taylor. Numerical simulation of viscous free surface flow. Int Jnl of Num Meth for HFF 8(4) DOI 10.1108/09615539810213223
M. Cruchaga, D. Celentano, T. Tezduyar. Computation of mould filling processes with a moving Lagrangian interface technique. Commun. Numer. Meth. Engng. 18(7) (2002) DOI 10.1002/cnm.506
M. Hammami, M. Baccar, M. Mseddi. Étude numérique de la formation des soufflures dans le cas du moulage gravitaire avec coulée en source. Mécanique & Industries 9(5) (2009) DOI 10.1051/meca/2009005
M. Cruchaga, D. Celentano. Numerical Analysis of Thermally Coupled Flow Problems with Interfaces and Phase-change Effects. International Journal of Computational Fluid Dynamics 16(4) DOI 10.1080/1061856021000025139
L. Gaston, A. Kamara, M. Bellet. An arbitrary Lagrangian-Eulerian finite element approach to non-steady state turbulent fluid flow with application to mould filling in casting. Int. J. Numer. Meth. Fluids 34(4) (2000) DOI 10.1002/1097-0363(20001030)34:4<341::aid-fld64>3.0.co;2-k
S. Abdullah, D. Gethin, F. Bell. An experimental investigation of the filling of a thin section casting and simulation by the finite element method. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 212(4) (2005) DOI 10.1243/0954405981515699
R. Ransing, S. Savino, R. Lewis. Numerical optimisation of tilt casting process. International Journal of Cast Metals Research 18(2) (2013) DOI 10.1179/136404605225022901
A. Caboussat, V. Maronnier, M. Picasso, J. Rappaz. Numerical Simulation of Three Dimensional Free Surface Flows with Bubbles. DOI 10.1007/978-3-642-19014-8_4
J. Hétu, D. Gao, A. Garcia-Rejon, G. Salloum. 3D finite element method for the simulation of the filling stage in injection molding. Polym Eng Sci 38(2) (2004) DOI 10.1002/pen.10183