Latest revision as of 04:29, 2 February 2021

Abstract

n increasing interest in inductive lanes for dynamic wireless power transfer, as a mean of on-the-road charging of electric vehicles, has been observed in recent times. Most of current related research and development efforts have so far been guided by the presumption of a future large-scale adoption of electric vehicle types whose payload and power train characteristics are compatible with the standard internal combustion engine vehicles they are supposed to replace in the coming years. The quest for energy conservation and more sustainable personal transportation, however, opens new possibilities for hybrid human-powered lightweight electric vehicles, such as e-bikes, electric rickshaws and similar lower mass, lower power and lower speed vehicles. These vehicles, when combined with dynamic inductive wireless power transfer lanes are predicted to deliver unprecedented transportation services at low granularity, constituting an alternative to heavier personal cars and even to public transports in some contexts. To allow this modal shift, some urban policies must be implemented, and new architectural guidelines should be adopted to include the inductive electrification of lightweight vehicle lanes. The expected result is a better conservation of energy and the promotion of a safer and healthier lifestyle in the cities of tomorrow. This research was supported by FCT –“Fundação para a Ciência e Tecnologia”, the Portuguese funding agency supporting science, technology and innovation, grant SFRH/BD/52349/2013, project scope UID/CEC/00319/2019 and the MIT-Portugal Program. It was also financed by the ERDF –European Regional Development Fund through the Operational Programme for Competitiveness and Internationalization ‐ COMPETE 2020 Programme, within project ESGRIDS –Enhancing Smart GRIDs for Sustainability, SAICTPAC/0004/2015‐ POCI‐01‐0145‐FEDER‐016434. The authors are also grateful to the Portuguese National Association of theTwo-Wheeled Industries (ABIMOTA), for providing access to recent statistics collected by the Confederation of the European Bicycle Industries (CONEBI).

Original document

The different versions of the original document can be found in:

• http://hdl.handle.net/1822/67500 under the license http://creativecommons.org/licenses/by/4.0/