Latest revision as of 20:44, 3 February 2021

Abstract

Mechanical damage involving dents with gouges is one of the leading causes of transmission pipeline failures in terms of both static and cyclic pressure loading. Because of the severity of this defect type, pipeline companies are required to respond to these anomalies by either removing damaged sections or repair using welded sleeves. For more than 10 years, composite materials have been used to repair corroded pipelines and their use has gained wide acceptance across the pipeline industry. Numerous systems have been tested with results being presented in the open literature. Testing was recently performed to assess the use of a water-activated composite repair system, Aquawrap® , in terms of its ability to repair mechanical damage subjected to cyclic pressure service. The Aquawrap® repair system has been extensively tested on corrosion defects but testing on pipes with dents had not been done. The water activated pre-preg urethane resin system offers excellent long tern (creep-rupture) strength combined with easy low cost field installation. Pipes having diameter to wall thickness ratios ranging from 34 to 68 were fitted with dents and gouges. Repair involved removing the gouged material of the pipe after indentation and repairing using the composite sleeve. The result of this specific test program showed that on-average the fatigue life for mechanically-damaged pipes can be increased on the order of three orders of magnitude when repaired by grinding and installing composite sleeves. This paper provides details on the methodology of the test program, results, and most importantly, information that can be used by operators in repairing their pipeline systems.Copyright © 2006 by ASME

Original document

The different versions of the original document can be found in:

• http://pdfs.semanticscholar.org/1750/b77df36567f1c9381dc951b00b5f176d5ff1.pdf

• http://asmedigitalcollection.asme.org/IPC/proceedings-pdf/doi/10.1115/IPC2006-10482/4569115/815_1.pdf,

http://dx.doi.org/10.1115/ipc2006-10482

• http://compositerepairstudy.com/papers/IPC%20Paper%20on%20Aquawrap%20(IPC%202006-10482,%20Alexander-Worth,%20Final).pdf,

https://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=1596717,

https://asmedigitalcollection.asme.org/IPC/proceedings/IPC2006/42614/815/319332,

http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=1596717,

https://academic.microsoft.com/#/detail/2071097096