Eddy Current Modeling and Simulations for the Characterization of Low Thickness Multilayer Materials_prueba_latex

@@ Line 1: / Line 1: @@
 == Abstract ==
-<p>Measuring and determining the parameters and characteristics of multilayer structures have become an important subject for several recent studies. This importance is due to industry needs and structural health requirements. The eddy current inspection is considered an important practical tool that ensures the safety and efficiency of multilayer structures and responds to the above necessities. The diversity of multilayer structure characteristics is one of the principal problems that must be solved. These physical and electromagnetic parameters are not always available or provided by the suppliers. Another problem that arises in the development of different models related to these structures is the difficulty of obtaining a satisfactory diagnosis. This difficulty returns to the complexity of geometry, the presence of small dimensions and sizes, and the existence of various parameters. In this context, it is necessary to achieve a strategy for the development of software and hardware tools concerning the characterization of multilayer structures. These tools must be applied to surmount the above problems and improve the technical advantages of the eddy current inspection. The principal objective of this work is to investigate the efficacy of the eddy current method applied to aeronautical materials, particularly low thickness multilayer structures. The modeling was performed using the finite element method. A software program was developed to investigate changes in the coil impedance. Results are initially validated and compared against the analytical and computational results given for simple cases. They are very similar, and they present a good agreement for both situations. The error is 5% for the calculus of the induction magnetic B. It also varies from 0.17% to 5.32% for impedance responses that enable the application of the developed code to carry out simulations for complex geometries. For various values of parameters and a wide range of applications, the parameters and properties of the problem can easily be introduced into the code. This permits the analysis and calculation of changes in impedance versus the effect of any variation in parameters. The developed approach is sufficiently general. It can simulate various potential cases of defects in low thickness multilayer structures due to its adequate design. It can generate interpretable results for differentOPEN ACCESS Received: 14/07/2024 Accepted: 02/10/2024</p>
 == Document ==
-<pdf>Media:Draft_Sanchez Pinedo_618190645-2813-document.pdf</pdf>
+<pdf>Media:Bennoud_et_al_Select a yeara-3206-document.pdf</pdf>

Revision as of 12:41, 11 March 2025

Abstract

Document

Document information

Document Score

Share this document

Keywords

claim authorship