(Created page with " == Abstract == Path Computation Element (PCE) can compute Traffic Engineering (TE) paths through a network that are subject to various constraints. Currently, TE paths are...") |
m (Scipediacontent moved page Draft Content 303604766 to Hardwick et al 2018a) |
(No difference)
|
Path Computation Element (PCE) can compute Traffic Engineering (TE) paths through a network that are subject to various constraints. Currently, TE paths are Label Switched Paths (LSPs) which are set up using the RSVP-TE signaling protocol. However, other TE path setup methods are possible within the PCE architecture. This document proposes an extension to the PCE communication protocol (PCEP) to allow support for different path setup methods over a given PCEP session.
The different versions of the original document can be found in:
Published on 01/01/2018
Volume 2018, 2018
DOI: 10.17487/rfc8408
Licence: CC BY-NC-SA license
Are you one of the authors of this document?