m (Cinmemj moved page Draft Samper 836732129 to Lee et al 2010a) |
|
(No difference)
|
Published in Computational Fluid Dynamics Review 2010, Part 9, 253-259, Edited by M M Hafez (University of California, Davis, USA), K Oshima (University of Tokyo, Japan), & Dochan Kwak (NASA Ames Research Center, USA), 2010
DOI: 10.1007/978-3-642-17884-9_31
The chapter investigates Shock Control Bumps (SCB) on a Natural Laminar Flow (NLF) aerofoil; RAE 5243 for Active Flow Control (AFC). A SCB approach is used to decelerate supersonic flow on the suction/pressure sides of transonic aerofoil that leads delaying shock occurrence or weakening of shock strength. Such an AFC technique reduces significantly the total drag at transonic speeds. This chapter considers the SCB shape design optimisation at two boundary layer transition positions (0 and 45%) using an Euler software coupled with viscous boundary layer effects and robust Evolutionary Algorithms (EAs). The optimisation method is based on a canonical Evolution Strategy (ES) algorithm and incorporates the concepts of hierarchical topology and parallel asynchronous evaluation of candidate solution. Two test cases are considered with numerical experiments; the first test deals with a transition point occurring at the leading edge and the transition point is fixed at 45% of wing chord in the second test. Numerical results are presented and it is demonstrated that an optimal SCB design can be found to significantly reduce transonic wave drag and improves lift on drag (L/D) value when compared to the baseline aerofoil design.
Published on 01/01/2010
DOI: 10.1007/978-3-642-17884-9_31
Licence: CC BY-NC-SA license
Are you one of the authors of this document?