You do not have permission to edit this page, for the following reason:
You can view and copy the source of this page.
x
1
== Abstract ==2
3
The objective of this paper is to describe the numerical simulation of the transition4
zones in the multifunctional fuselage panel design to integrate a VHF (Very High Frequency) antenna. The panel is made of GLARE (Glass Laminate Aluminium Reinforced Epoxy) with a central window of GFRP (Glass Fibre Reinforced Polymer). The structural analyses of the transition GLARE/GFRP is presented along with its experimental validation. The numerical simulations showed a very high level of correlation with the experimental tests, both in the longitudinal load vs displacement curves and deformations captured with strain gauges and DIC (Digital Image Correlations).5
6
== Full document ==7
<pdf>Media:Draft_Content_472263375P_IDC5_32.pdf</pdf>8
Return to Turon et al 2021a.
Back to Top
GET PDF
Document information
Published on 15/02/21
Submitted on 15/02/21
DOI: 10.23967/emus.2020.002
Licence: CC BY-NC-SA license
Share this document
Keywords
claim authorship
Are you one of the authors of this document?