You do not have permission to edit this page, for the following reason:
You can view and copy the source of this page.
x
1
2
== Abstract ==3
4
Three control schemes for the operation of induction motors in the field-weakening region are compared and assessed in terms of performance and complexity. These three control schemes fully utilize the maximum available voltage and current at any speed, and thus provide the maximum possible torque in the entire field weakening region. For the comparison, the three control schemes were implemented on the same experimental platform, i.e. the same Digital Signal Processor (DSP) board, power inverter and motor drive. In this way, it is possible to judge not only the performance of each solution, but also its requirements in terms of computational time, tuning complexity, parameter knowledge and stability of operation.5
6
7
== Original document ==8
9
The different versions of the original document can be found in:10
11
* [http://hdl.handle.net/11585/124093 http://hdl.handle.net/11585/124093]12
Return to CASADEI et al 2010a.
Back to Top
Document information
Published on 31/12/09
Accepted on 31/12/09
Submitted on 31/12/09
Volume 2010, 2010
Licence: CC BY-NC-SA license
Share this document
Keywords
claim authorship
Are you one of the authors of this document?